Pineapple Software Version (ex: 2.5.0, 2.6.4): How do you tell without being able to connect to it?
OS used to connect to the pineapple: OS X 10.8.2
2008 MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Memory: 4 GB
Network layout of how your setup is connected (including IP information):>>
Macbook is connected to Airport Timcapsule via wifi
Macbook ip address 10.0.1.129
Airport 10.0.1.1
I am currently running Backtrack 5v3 and Windows 8 on parallels version 8.
I have tried to connect via both the above softwares. I followed the instructions in the booklet that came with the pineapple.
In the instructions for the windows 7 it states that you will see Pineapple facing adapter I do not see this in my list. I only have two option in my network adapters one is ethernet connections and one is the wifi connections. I do however see the pineapple listed in my wireless connections under wifi connections. I have tried to connect to but was not prompted for user id and password. Also when I plug the pineapple into the ethernet connection on the windows systems it shows it connected but again I cannot connect to it.
In backtrack when I run the wget script I am able to download the software and install it. I can run wp4.sh and it asks me for the setup I hit all the defaults and am prompted to click the link to connect to the pineapple in a internet browser but that is far as I can get >>
Pineapple Network [ 255.255.255.0]:
Pineapple Netwrok [172.16.42.0/24]:
Interface Between PC and Pineapple [eth0]:
Interface between PC and Internet [wlan]:
Internet Gateway [10.211.55.1]:
IP address of Host PC [ 172.16.42.42]:
IP address of Pineapple [172.16.42.1];
Internet 10.211.55.1 - wlan0
Computer: 172.16.42.42
Pineapple 172.16.42.0/24 - eth0
SIOCDELRT: No such process<<< I am concerned about these two errors
SIOCADDRT: No such device<<<
When I try to connect to the link listed I get Firefox cannot establish connection
Parallels current settings under the device> network >wi fi bridged
Under virtual machine >configure >security> I did not choose isolate machine. I have read multiple post where people are saying they choose this option. I have taken it off and put it on. I have also tried to bridge multiple connections with no luck. I have been unsuccesful trying to communicate with the pineapple. When I establish a wif connection via windows I can see the wireless activity light.
I have tried unpluggin the ethernet cable from the WLAN to the PPOE as well. I am pobably trying to set to many diverse settings at the same time.
Internet Gateway where would I find this setting? Where would I find this information? Anyway any help would be appreciated.
NooB PineApple User
in WiFi Pineapple Mark IV
Posted
Network layout of how your setup is connected (including IP information):>>
Macbook is connected to Airport Timcapsule via wifi
Macbook ip address 10.0.1.129
Airport 10.0.1.1
I am currently running Backtrack 5v3 and Windows 8 on parallels version 8.
I have tried to connect via both the above softwares. I followed the instructions in the booklet that came with the pineapple.
In the instructions for the windows 7 it states that you will see Pineapple facing adapter I do not see this in my list. I only have two option in my network adapters one is ethernet connections and one is the wifi connections. I do however see the pineapple listed in my wireless connections under wifi connections. I have tried to connect to but was not prompted for user id and password. Also when I plug the pineapple into the ethernet connection on the windows systems it shows it connected but again I cannot connect to it.
In backtrack when I run the wget script I am able to download the software and install it. I can run wp4.sh and it asks me for the setup I hit all the defaults and am prompted to click the link to connect to the pineapple in a internet browser but that is far as I can get >>
Pineapple Network [ 255.255.255.0]:
Pineapple Netwrok [172.16.42.0/24]:
Interface Between PC and Pineapple [eth0]:
Interface between PC and Internet [wlan]:
Internet Gateway [10.211.55.1]:
IP address of Host PC [ 172.16.42.42]:
IP address of Pineapple [172.16.42.1];
Internet 10.211.55.1 - wlan0
Computer: 172.16.42.42
Pineapple 172.16.42.0/24 - eth0
SIOCDELRT: No such process<<< I am concerned about these two errors
SIOCADDRT: No such device<<<
When I try to connect to the link listed I get Firefox cannot establish connection
Parallels current settings under the device> network >wi fi bridged
Under virtual machine >configure >security> I did not choose isolate machine. I have read multiple post where people are saying they choose this option. I have taken it off and put it on. I have also tried to bridge multiple connections with no luck. I have been unsuccesful trying to communicate with the pineapple. When I establish a wif connection via windows I can see the wireless activity light.
I have tried unpluggin the ethernet cable from the WLAN to the PPOE as well. I am pobably trying to set to many diverse settings at the same time.
Internet Gateway where would I find this setting? Where would I find this information? Anyway any help would be appreciated.
Justloud@hotmail.com