Jump to content

dark_knight

Active Members
 View Profile  See their activity

  • Posts

    3

  • Joined

  • Last visited

 Content Type 

Posts posted by dark_knight

    Sslstrip Issues

    in WiFi Pineapple Mark IV

    Posted

    • Pineapple Hardware Version (ex: Mark III, Mark IV, etc.): Mark IV
    • Pineapple Software Version (ex: 2.5.0, 2.6.4): 2.7.0
    • OS used to connect to the pineapple: BackTrack 5 R3(VM)
    • Network layout of how your setup is connected (including IP information): Pineapple connected to Backtrack 5 VM on Mac OSX
    • All the tools/options that are running on the pineapple when the issue happened:ssltrip,karma, cronjobs
    • Ping results from computer to pineapple:
    • PING 172.16.42.1 (172.16.42.1) 56(84) bytes of data.
    • 64 bytes from 172.16.42.1: icmp_seq=1 ttl=64 time=0.917 ms

    • 64 bytes from 172.16.42.1: icmp_seq=2 ttl=64 time=0.765 ms
      64 bytes from 172.16.42.1: icmp_seq=3 ttl=64 time=1.00 ms
      64 bytes from 172.16.42.1: icmp_seq=4 ttl=64 time=0.901 ms
    • Is the problem repeatable (Yes/No):
    • Steps taken which created the problem:
    • Error Messages:
    • Log file information: None
    • Anything else that was attempted to 'fix' the problem:

    Ok so I must be doing something wrong because I have to experience the power of the pineapple. Karma works well and responds to the client. However that's about it. So the client is connected, sslstrip is up and running, the site throws the ssl warning, you enter the creds but the size of the logs is zero.

    I have also tried other modules e.g. random roll and nada...All tools successfully installed to usb.

    So what am I missing with this thing?

    Installing Modules

    in WiFi Pineapple Mark IV

    Posted

    Hi,

    I am trying to install to usb. However I don't seem to be installing there.

    I did:

    - Navigated to the pineapplebar

    - List Infusions

    - sslstrip install

    - Install to USB storage

    Name Version Location Size opkgmanager 2.0 usb 264.0K Pin to navbar Remove sslstrip 2.2 usb 60.0K Pin to navbar Remove

    I click sslstrip and get

    sslstrip not installed

    Install to Internal Storage or USB Storage

    See some info below:

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Bus 001 Device 002: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick

    total used free shared buffers

    Mem: 29480 22200 7280 0 2660

    -/+ buffers: 19540 9940

    Swap: 1897628 0 1897628

    I am running firmware version is 2.6.3 on BT5 R2.

    Thoughts??

×
×
  • Create New...