TunezNZ
-
Posts
2 -
Joined
-
Last visited
Posts posted by TunezNZ
-
-
Im having a problem with getting the TP-Link WN722N going.
I have mk4 with 2.5, First run with standard script it attempts to get an IP address and then stopped so I removed the -B from the wpa_supplicant line it then returns "wlan1: Failed to initiate AP scan" three times then and stops. Commenting out everything but the wpa_supplicant line gives the same results.
This is the output with the normal commenting.
root@Pineapple:~# iwconfig wlan1
wlan1 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
root@Pineapple:~# cat ./wireless_connect2.sh
#!/bin/sh
#Change the Mac address of the usb wifi to something random.
ifconfig wlan1 down
macchanger -A wlan1
ifconfig wlan1 up
#WPA2 - Let's assume we're going to connect to a WPA2 network
wpa_supplicant -D nl80211 -i wlan1 -c /etc/wpa_supplicant.conf
#WEP - Uncomment if you want to conect to a WEP network
#iwconfig wlan1 mode managed key your_key_here
#iwconfig wlan1 essid "your access point name here"
#OPEN - Uncomment if you want to conect to a WEP network
#iwconfig wlan1 essid "your access point name here"
#Setup ipforwarding via iptables.
echo 1 > /proc/sys/net/ipv4/ip_forward
#Reset iptables
iptables -F
iptables -X
iptables -A FORWARD -o wlan1 -i br-lan -s 172.16.0.0/24 -m conntrack --ctstate NEW -jACCEPT
iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
iptables -A POSTROUTING -t nat -j MASQUERADE
#Wait for 6 seconds to give enough time for association.
sleep 6
#Grab an ip via DHCP
udhcpc -i wlan1
root@Pineapple:~# cat /etc/wpa_supplicant.conf
network={
ssid="ssid"
psk="password"
}
[/CODE]Putting in the correct SSID has helped, but now its telling me this.
[CODE]
root@Pineapple:~# ./wireless_connect2.sh
Current MAC: 00:60:04:b0:90:58 (Computadores Modulares Sa)
Faked MAC: 00:c0:c3:40:34:66 (Acuson Computed Sonography)
wlan1: Failed to initiate AP scan
wlan1: SME: Trying to authenticate with 90:f6:52:48:43:30 (SSID='Mack_2.0' freq=2412 MHz)
wlan1: Trying to associate with 90:f6:52:48:43:30 (SSID='Mack_2.0' freq=2412 MHz)
wlan1: Associated with 90:f6:52:48:43:30
wlan1: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
wlan1: CTRL-EVENT-DISCONNECTED bssid=90:f6:52:48:43:30 reason=3
wlan1: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
wlan1: SME: Trying to authenticate with f8:d1:11:93:c2:3f (SSID='Mack_2.0' freq=2412 MHz)
wlan1: Trying to associate with f8:d1:11:93:c2:3f (SSID='Mack_2.0' freq=2412 MHz)
wlan1: Associated with f8:d1:11:93:c2:3f
wlan1: CTRL-EVENT-DISCONNECTED bssid=f8:d1:11:93:c2:3f reason=3
wlan1: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
wlan1: SME: Trying to authenticate with 90:f6:52:48:43:30 (SSID='Mack_2.0' freq=2412 MHz)
wlan1: Trying to associate with 90:f6:52:48:43:30 (SSID='Mack_2.0' freq=2412 MHz)
wlan1: Associated with 90:f6:52:48:43:30
wlan1: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
[/CODE]
Mk4 Usb Wifi Dongle Internet Sharing How-To
in WiFi Pineapple Mark IV
Posted · Edited by TunezNZ
I have got it working now on a different network. I think it has something to-do with having the pineapple connected on the lan connection and trying to join the same network, I find funny things happen when I connect the pineapple up to my lan (With the exit gateway/router 172.16.42.42) such as it stealing all the DHCP clients and setting the pineapple as the default gateway.