ON-jOlt
-
Posts
6 -
Joined
-
Last visited
Posts posted by ON-jOlt
-
-
hello does anyone know how to build a 50w wi-fi signal booster. something were it would go between the usb wi-fi pen and the antenna. i know you can buy then for about 500 but i would like to make a diy one hoping to keep the cost down. can anyone point me to any tutorials are does anyone know how to make one. thanks
Bro, 50W in the 2.4G 13cm will either hurt you or the transmitter will blow with all the impedance coming back from the antenna. Hell 5w is even too much (take out 9blocks if not more with interferance)
Get a Ham Lic. before transmitting or braking FCC parts (besides there is no reason ppl in this field dont get one anyway. (dont be a CBer and put seatwarmers (high watt amps to boost you sig.) just lean how to better make antennas. otherwise you may blead to other freqs
i think anything over 1W 1000mW is illegal anyway with out a lic. (alphas i believe is too, but what eves)
besides you would barley be able to hear others unless you had filters, and it would be alot of protocol noise anyway.
-
It is cool but the 4mb flash why is that even being used today?
kinda makes me interested in buying one, does it get good reception? wifi
Keep, in mind I am just now playing with it. I've not really done my RF metering, and gain checks, That being said.
Im quite impressed with the PCB antennas. I picked up a 3dB gain compared to my iMac.
but because its a PCB antenna, it's so easy to souder a tnc/bnc connector. or even do some 2meter antennas.
looking at the stats, this is the same proc and same atheros chip as the MARK IV
-
Topic OPEN again as a community prodject. MOD did not like this in jasager
the TL-MR3020
I just got one of these for $30 online new, this is the device that 'PirateBox' (just a File sharing idea) uses. Well because i love the damn size of this thing and it's stats I think i can make a mini-Pineapple with this guy. I just put OpenWRT on it with a simple upgrade to the firmware though the Web interface, took all of 2mins!
Some ideas, start jasager, vpn to a server to allow remote access, (through 3G, wifi, or WAN) load a cloud drive to save info or save to usb. leave it in a bush with a 5v 2000mA batter and pentest from home through VPN.
VPN would allow remote sniffing if Tunnel was open to.
I dont know, thoughts?!?!
Ok the stats:
CPU :Atheros AR7240@400MHz
Ram : 32M (14M free when all is said and done with /tmp )
Flash : 4M :( but plenty of room for packeges with extroot, usbmount, or sambafs mount
Network : 1 x 100Mb
USB : 1 x 2.0 (but the host may be able to suport 2)
Serial : Yes (but you dont need it)
Switchs : 3 Mode (I love this idea, i can just flip the mode to execute a script. 1 WPS (asign to a script as well or exec mode when pressed)
OpenWRT info: http://wiki.openwrt.org/toh/tp-link/tl-mr3020
PirateBox info: PirateBox
I just think this mini-pineapple could even work in conjunction with the pineapple. Its just too cool for its size
Oh and they are making a Battery oprated builtin 3G/4G with a usb port and its the size of a small cellphone (pager size) but no word how much
-
Topic Moved to Community build
http://forums.hak5.org/index.php?showtopic=26313
the TL-MR3020
I just got one of these for $30 online new, this is the device that 'PirateBox' (just a File sharing idea) uses. Well because i love the damn size of this thing and it's stats I think i can make a mini-Pineapple with this guy. I just put OpenWRT on it with a simple upgrade to the firmware though the Web interface, took all of 2mins!
Some ideas, start jasager, vpn to a server to allow remote access, (through 3G, wifi, or WAN) load a cloud drive to save info or save to usb. leave it in a bush with a 5v 2000mA batter and pentest from home through VPN.
VPN would allow remote sniffing if Tunnel was open to.
I dont know, thoughts?!?!
Ok the stats:
CPU :Atheros AR7240@400MHz
Ram : 32M (14M free when all is said and done with /tmp )
Flash : 4M :( but plenty of room for packeges with extroot, usbmount, or sambafs mount
Network : 1 x 100Mb
USB : 1 x 2.0 (but the host may be able to suport 2)
Serial : Yes (but you dont need it)
Switchs : 3 Mode (I love this idea, i can just flip the mode to execute a script. 1 WPS (asign to a script as well or exec mode when pressed)
OpenWRT info: http://wiki.openwrt.org/toh/tp-link/tl-mr3020
PirateBox info: PirateBox
I just think this mini-pineapple could even work in conjunction with the pineapple. Its just too cool for its size
Oh and they are making a Battery oprated builtin 3G/4G with a usb port and its the size of a small cellphone (pager size) but no word how much
-
i've not completely familiarized myself with the pineapple, i know enough about it. I just put OpenWRT on a TP-Link MR3020 (the one they use for PirateBox) and thought to myself im going to make it more like a pineapple.
I digress, could you not just route them through a proxy that, instead of injecting an ad, you inject the JS. have the ajax point to HTML5 socket or nodeJS, hell you may even be able to open an XMLHttpRequest to "<anydomain-like-google.com/pineapple/kl" then just filter (regex) the request at the proxy for "/pineapple/kl" and redirect it to wherever you want to run it. I do XSS hacking this way alot.
Just my 2 cents, they do this kind of JS for logging mouse movements and keys on OWA (OpenWebAnilitics) and piwik and store it in DB so you can replay a session, its sick.
Pineapple³ (cubed)? Tl-mr3020
in Community Projects
Posted
Succsess!!!! so i have a vary alpha firmware based on the pineapple using the newer jasager, and right now its working with a usb as the disk.