Jump to content

LabRaTT

Active Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by LabRaTT

  1. I've been having issues getting my pineapple mark III to boot. So finally i hooked it up by the serial port and this is what outputs

    RedBoot(tm) bootstrap and debug environment [ROMRAM]
    Accton release, version v1.5.1 - built 20:10:40, Aug 19 2008
    
    
    Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
    
    
    Board: ap51
    RAM: 0x80000000-0x82000000, [0x8003f640-0x80fe1000] available
    FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
    == Executing boot script in 1.000 seconds - enter ^C to abort
    ^C
    RedBoot> fis list
    Name              FLASH addr  Mem addr    Length      Entry point
    RedBoot           0xA8000000  0xA8000000  0x00030000  0x00000000
    rootfs            0xA8030000  0xA8030000  0x006B0000  0x00000000
    vmlinux.bin.l7    0xA86E0000  0x80041000  0x00100000  0x80041000
    FIS directory     0xA87E0000  0xA87E0000  0x0000F000  0x00000000
    RedBoot config    0xA87EF000  0xA87EF000  0x00001000  0x00000000
    RedBoot> reset
    +.. Resetting.
    Found AR8012 PHY ID is 004d:d021 at 1
    Ethernet eth0: MAC address 00:c0:ca:32:88:b7
    IP: 192.168.0.1/255.255.255.0, Gateway: 0.0.0.0
    Default server: 0.0.0.0
    
    
    RedBoot(tm) bootstrap and debug environment [ROMRAM]
    Accton release, version v1.5.1 - built 20:10:40, Aug 19 2008
    
    
    Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
    
    
    Board: ap51
    RAM: 0x80000000-0x82000000, [0x8003f640-0x80fe1000] available
    FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
    == Executing boot script in 1.000 seconds - enter ^C to abort
    RedBoot> fis load -d vmlinux.bin.l7
    Image loaded from 0x80041000-0x80291086
    RedBoot> exec
    Now booting linux kernel:
     Base address 0x80030000 Entry 0x80041000
     Cmdline :
     
  2. ok i can get this working in backtrak 5 but for some reason i am having issues with a video driver on my old hp dv2815nr.... so for now i just want to set this up in windows 7 ICS but ICS will not allow me to set a static IP.. and i rather not go through the trouble of changing all the ips in the pineapple... also i have my macbook pro running lion but sharing stopped working with static IPs when i left snow to lion... can someone please help with one or all of my issues thank you..

×
×
  • Create New...