fher98
-
Posts
12 -
Joined
-
Last visited
Posts posted by fher98
-
-
I suggest you download it over opkg.
opkg update
opkg install webif
[/CODE]Of course, you would have to give the MKII and internet connection first.
Otherwise, depending on your hardware, you could upgrade to the MKIII firmware - though that won't help you install webif either, you will still need to execute the steps above. Just Internet Connection Sharing is made easier.
Lastly, it would be possible to manually download webif and install it. You should download it from the OpenWRT servers though. Make sure to choose the correct version of OpenWRT. The OpenWRT version can be found by SSHing into the pineapple MKII and looking at the SSH banner.
Best Regards,
Sebkinne
Thanks for the reply, seems just like Debian gonna try it out!
-
you could probably use mk3 ( http://forums.hak5.o...showtopic=25201 )
what device do you have ?
Thanks for the reply, I have a MR3201A.
-
Hello there,
Finally got it flashed and ssh'ed to my MK2. Then go to install the packages from digininjas site's, without problems.
When its was time to install webif I found ftp://ftp.berlios.de/pub/xwrt/packages/ . But I can get the right webif installed. Complains about :
opkg install webif_milestone-2.76.ipk
Collected errors:
* Packages were found, but none compatible with the architectures configured
Does any one has a working copy for the mk2? please help and thanks
-
The password after a clean flash is not set! JAJAJAJA had to telnet to it. I was about to throw the hydra on the little f*cker!!!
thanks guys!!!
-
Well, last time I logged in (on the mk.IV that is) the password was pineapplesareyummy, and not pinneapplesareyummy as you wrote..
Hey thanks for the reply, lat night was a little too late, i messpelled the pass here., but just tried to be sure and I still cant log in.
-
Hey everyone...
Just finished flashing my mk2 with the steps shown here http://www.digininja.org/jasager/installation.php but when I try ssh to the device the pinneapplesareyummy pass wont work.. Whats the new pass?? thanks!
-
Hey all,..
Been trying for the last couple of hours to flash the mk2 without luck. From digininjas site i did Run up redboot ./redboot.pl 192.168.1.1 and then power on the Fon. ... And im getting
./redboot.pl 192.168.1.1
192.168.1.1 is alive
open('192.168.1.1') failed
from the site I read that 192.168.1.1 should be my localhost,.. and 192.168.1.254 the fon... what im doing wrong?
thanks
-
You can go to http://www.gargoyle-router.com/ they have all kinds of info for the device and stuff.
In the download section they have fon-flash. That will let you flash software to your device. have directions and the whole deal
there is software on digininja's site for it and the mk3 software will also work.
I think that urlsnarf will end up crashing the device if you use mk3 software but I do not remember
Thanks bud! gonna check that out!
-
wifipineapple.com / google
Mmm ya... the wifipineapple has stuff only for mk3 and mk4 not for my old fonera. thanks anyway.
-
Hello there!
Sometime ago I got the fon MR3201A played around with ait a couple of months then went to the closet. Now I want to upgrade it to latest firmware... or a clean install...
Where did you got the instructions for flashing it.. thanks.
-
Could it be possible since your sniffing stuff on the air, just to grab the wep/wap passwords when they reach the pineapple? Cuz this is what it does, to trick the client into thinking is the right AP..
Can this be possible?
Where To Get Webif For The Mk2
in WiFi Pineapple Mark IV
Posted
opkg updated pretty well.. but no webif on the package list
wavemon - 0.4.0b-1 - wavemon is a ncurses-based monitoring application for wireless network
wccpd - 0.2-1 - wccpd is a WCCP (Web Cache Coordination Protocol) server daemon
wdiag - 0.9-1 - A collection of utilities to get DSL stats from Westell DSL modems.
weechat - 0.2.6-1 - Weechat is fast, light & extensible IRC client.
weechat-mod-charset - 0.2.6-1 - Weechat is fast, light & extensible IRC client.
weechat-mod-lua - 0.2.6-1 - Weechat is fast, light & extensible IRC client.
wget - 1.11.4-1 - Wget is a network utility to retrieve files from the Web using http
wget-nossl - 1.11.4-1 - Wget is a network utility to retrieve files from the Web using http
wifidog - 1.1.5-2 - The Wifidog project is a complete and embeddable captive
wireless-tools - 29-2 - This package contains a collection of tools for configuring wireless
wiviz - 1.0-1 - Wireless Network Visualization
wol - 0.7.1-2 - wol implements Wake On LAN functionality in a small program.
wpa-cli - 0.6.3-1 - WPA Supplicant command line interface
wpa-supplicant - 0.6.3-1 - WPA Supplicant
wput - 0.6.1-1 - Wput is a tiny ftp-client, that uploads files or directories
wshaper - 0.1 - A script to do traffing shaping with the HTB algorithm.
wx200d - 1.3-1 - wx200d is a weather station data collector and server daemon
x11perf - 1.5-2 - x11perf
xauth - 1.0.3-2 - xauth
So i guess ill try the openwrt servers.