Drewid
-
Posts
5 -
Joined
-
Last visited
Posts posted by Drewid
-
-
What you have suggested has been verified. I'm currently running the Nano directly from my Anker 10000 battery pack and am not seeing the same behavior. It's a bit surprising that the RaLink RT5370 included with the Tactical Elite pack would exceed the power available with Juice 4000 with the listed Voltage: 5V+5%, Amperage: 70mA Average
-
Thanks, I'll verify output of the Pineapple Juice 4000 in the AM. I was running on that for about 3 hours total.
-
I'm getting a really strange output in the PineAP SSID pool from captures. I get proper test SSIDs captured from my devices in the area but then occasional random strings.
Log probes, log associations, capture SSIDs to log are the enabled check boxes under PineAP with the Daemon running.
I'll try running airmon-ng tomorrow through kali on the laptop to see if there's anything in the area that I'm missing. In the testing with all of the other pineapples prior, I've never seen output like this.
Sample output section:
______________________________________
SeriesofTubes
SeriesofTubes5g
S4DxwRA8?c&$M-03;z5Za?|]8e<oQ0:#
Pz+d-rjb<@HCgZyegbP?@1DduvM:(BtI
KiZRl8$xZi!=xC-dZR<.^p]k io0OBx+
TestAPSSID1______________________________________________
I get a few valid SSIDs and then random strings for a while and then valid output again.
I don't have any other modules running currently and just got the device today.
The only two modules I've installed after upgrade and factory reset is:
Site Survey 1.2 Status 1.1 I'll happily provide any other info to help figure this out.
Preemptive apologies if this has been covered somewhere else, I searched the forums and didn't find something similar.
-
My name is Drew aka Drewid
Favourite game: bejeweled - not really a gamer at all
Favourite OS: debian/7/OS X
Favourite console: Atari (back before there was a number attached to it) - don't own any now, last console was Genesis
Nationality: US (Czech/Slovak/Ukraine/Russian/Polish/German)
Accent: neutral
Sex: Male
Age: Unknown
Race: White American
Height: 5-11ish
Status: relationship
Build: V2.0 - actually athletic
Favourite band: http://www.last.fm/user/quadrivialus - too many to list
Favourite book: whatever tech manual I have to read at the moment
Favourite author: Asimov
Favourite movie: Office Space
Favourite director: never really paid much attention
Favourite TV Show: Fringe
Favourite actor: TBD
Favourite actress: TBD
Favourite Pinup: Dita von Teese
Favourite Comedian: TBD
Other hobbies: hang-gliding, dj-ing, hardware hacking, sculpture, metal-casting, herbalist studies, brewing
Car: 2008 smart fortwo, 2000 Jeep Wrangler, 2001 1100 Honda Shadow Sabre, 2010 1300 Honda Fury
Occupation: Remote Engineer/Netadmin
Constantly learning and never enough time to fit in all of the hobbies and pursuits.
I unfortunately just found out about the show this past week.
Strange capture with PineAP after fresh upgrade to Nano 1.1.1
in WiFi Pineapple NANO
Posted
Thank you all, I was having issues with the Pineapple juice 4000 providing enough power. It was fully charged after receiving it and charging for a few hours. I ran it for about a day straight on an anker 10k usb power pack without a blip or reset. I was using the 180* adapter that was included with the pineapple juice so there shouldn't be any cable issues there. I would plug it straight into the Anker or use a short 6" cable when running with that. I ran into a few issues last night on the Pineapple juice 4000 where after it got down to 3 out of the four battery lights lit where it would stop responding to wifi connect attempts and the LED on the Nano would go dimmer than it should. Perhaps I ended up with a bum juice unit. I've had it run successfully for 3 days straight while attached to an Anker charger. It is definitely power sensitive. I've not yet tried running without the 3rd wifi adapter that came with the kit to see if that one thing was sending it over the edge.