Just Bricked my Nano - Howto unbrick
So I was trying to configure SSL with my NANO and somehow I ended up bricking it haha I can still ssh to it. but can't access the web interface anymore, and the led doesn't work nor the radios. Plus the storage is full for some reason. so every time I try to edit something...I can't. Please help guys!
Your lsusb and ifconfig indicates that the NANO is seen by your computer -- you're just lacking an IP address from it. Try the following command:
sudo ifconfig eth2 172.16.42.42 netmask 255.255.255.0 up
Then SSH in or hit the web interface.
Failing that try the web recovery method:
1. Download the latest WiFi Pineapple NANO firmware from https://www.wifipineapple.com/nano/
2. Hold down the reset button while plugging the WiFi Pineapple NANO into your computer
3. After a moment, release the