Deags Posted May 8, 2008 Share Posted May 8, 2008 i bought an IDE to SATA controller. but the drives are not being detected. the ide drives are set as master. any ideas? what what i am thinking. I MEAN CONVERTER MY BAD. http://www.beautyping.net/SA/SA4/pic_2.jpg Quote Link to comment Share on other sites More sharing options...
Sparda Posted May 9, 2008 Share Posted May 9, 2008 I haven't used those personally, but I sell them and advise people about them. When I asked about them I was told they don't always work and is entirely dependent on the drive controller. Quote Link to comment Share on other sites More sharing options...
Deags Posted May 9, 2008 Author Share Posted May 9, 2008 got them working kinda.... had to set cable select and check some stuff new error now :( root@sv2:~# mount -a $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or you have hardware faults, or you have a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows TWICE. The usage of the /f parameter is very important! If you have SoftRAID/FakeRAID then first you must activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for the details. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.