Jump to content

my pc Linux ubuntu wont read the bash bunny. LED light blue blinking


HD3
 Share

Go to solution Solved by jblk01,

Recommended Posts

Disk /dev/loop0: 55.45 MiB, 58130432 bytes, 113536 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 213.83 MiB, 224194560 bytes, 437880 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 99.35 MiB, 104169472 bytes, 203456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 216.96 MiB, 227471360 bytes, 444280 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 61.79 MiB, 64770048 bytes, 126504 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 70.32 MiB, 73728000 bytes, 144000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 32.3 MiB, 33865728 bytes, 66144 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 11.77 MiB, 12320768 bytes, 24064 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk model: ST500DM009-2F110
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 5D3654C2-9C18-4988-8CCB-56DAD20B8A31

Device       Start       End   Sectors   Size Type
/dev/sda1     2048      4095      2048     1M BIOS boot
/dev/sda2     4096   2101247   2097152     1G Linux filesystem
/dev/sda3  2101248 976771071 974669824 464.8G Linux filesystem


Disk /dev/mapper/ubuntu--vg-ubuntu--lv: 200 GiB, 214748364800 bytes, 419430400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/loop8: 11.82 MiB, 12378112 bytes, 24176 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop9: 61.75 MiB, 64729088 bytes, 126424 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop10: 65.38 MiB, 68542464 bytes, 133872 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop11: 32.31 MiB, 33869824 bytes, 66152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop12: 55.45 MiB, 58134528 bytes, 113544 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop13: 65.31 MiB, 68476928 bytes, 133744 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop14: 67.58 MiB, 70848512 bytes, 138376 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

 

Link to comment
Share on other sites

  • Solution

@HD3 what about 'lsblk' and 'lsusb' ?

 

If it's still not detected, try running 'sudo dmesg -w' and then plugging in the Bunny in arming mode.  I'd also try running this command too:

 

'sudo screen /dev/ttyACM0 115200'

  • Thanks 1
Link to comment
Share on other sites

7 hours ago, kdodge said:

One other thing to try, if possible, try a different USB port on your computer. and sometimes switch the USB2.0/USB3.X port as well

Is it possible that a data line isn't making good contact but the 5V line for power is?

Link to comment
Share on other sites

2 hours ago, chrizree said:

It would be good to get a more detailed feedback on how it was solved. Other users could benefit from that when visiting and reading the forum threads.

Yeah I was thinking about what switch was selected.

Link to comment
Share on other sites

On 9/6/2021 at 2:05 AM, jblk01 said:

Is it possible that a data line isn't making good contact but the 5V line for power is?

It's possible, depending on how abused the USB port is, however unlikely. But I have repaired computers so badly abused that it wouldn't even start up because the 5V line was shorting out to ground, I had to bend the whole computer USB port back in shape just to stop the short. Usually things are not that bad, but sometimes people bend those USB drives every which way. It's usually not hard to move them to a different port just to see if that is a problem or not. A simple test.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...