Shanegal Posted August 10, 2021 Share Posted August 10, 2021 I've just done a factory reset then tried to do firmware recovery on my nano and followed all the instructions about setting the static ip to 192.168.1.2 and subnet mask 255.255.255.0, but then when I go to 192.168.1.1 in my browser it doesn't load the page? I'm able to ping 192.168.1.2 but it won't allow ssh (connection refused) has anyone else had this problem?? thanks Shane Link to comment Share on other sites More sharing options...
chrizree Posted August 10, 2021 Share Posted August 10, 2021 47 minutes ago, Shanegal said: I'm able to ping 192.168.1.2 Well, you are pinging your own machine, do you actually mean 192.168.1.1 (i.e. the Nano)? Are you sure that the browser isn't adding https to the IP address when trying to access the Nano recovery interface? Link to comment Share on other sites More sharing options...
Shanegal Posted August 10, 2021 Author Share Posted August 10, 2021 The ip that got changed in the usb Ethernet settings to 192.168.1.2 is for the pineapple though isn’t it? Link to comment Share on other sites More sharing options...
chrizree Posted August 10, 2021 Share Posted August 10, 2021 "From the host PC, configure a static IP address on the WiFi Pineapple facing Ethernet interface to 192.168.1.2 with netmask 255.255.255.0". The host PC has .2 and the Pineapple has .1 Link to comment Share on other sites More sharing options...
Shanegal Posted August 10, 2021 Author Share Posted August 10, 2021 I will have another look over it in the morning and try to go over the settings I have again, thanks for helping me I really appreciate your time 🙂 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.