Larsenic Posted May 17, 2021 Share Posted May 17, 2021 So, I would like to add 5ghz capabilities to my Wi-Fi pineapple, and I have an adapter I have used on my laptop before with all the capabilities. (injection, 2.4, 5, the works). I want to know how I would go about making it integrate with the pineapple's interface, for example, when scanning for nearby networks and doing automatic associations, I want 5ghz options to pop up so I don't have to use the command line in it. Any help is great. Thanks! Link to comment Share on other sites More sharing options...
chrizree Posted May 17, 2021 Share Posted May 17, 2021 Take a look at the 1.1.0 Beta. Be sure to use an adapter that is supported by the Mk7. Link to comment Share on other sites More sharing options...
deathvegetable Posted May 22, 2021 Share Posted May 22, 2021 I think the Beta is great(as of 5-22-2021) i had it hang on me a few times, but i reinstalled the beta firmware and its working good. I have recon working with 2.4GHz & 5GHz simultaneously on my netgear A6210 wifi dongle its pretty much plug and play. Be aware the dongle might show up as wlan1 or wlan3 in the recon option while its still in managed mode, i make sure the A6210 is in monitor mode every time i plug it in for a recon scan i run: ifconfig wlan3 down && iwconfig wlan3 mode monitor && ifconfig wlan3 up The betas got some other cool features to check out as well Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.