My wifipineapple nano is not working properly

[cxaqhq]

My wifipineapple naon can't enter the system after manually (flashing in by uboot ) to the rom (2.4.0-2.7.0). The open ports are only 53, 80, and 1471 is not enabled.

what do I do！！！

Quote

PORT   STATE SERVICE VERSION
53/tcp open  domain  Unbound
80/tcp open  http    nginx 1.12.1
|_http-favicon: Unknown favicon MD5: D41D8CD98F00B204E9800998ECF8427E
| http-methods:  
|_  Supported Methods: GET HEAD POST
|_http-server-header: nginx/1.12.1
|_http-title: Site doesn't have a title (text/html; charset=UTF-8).

 

[chrizree]

What IP address are you scanning when getting those ports? 192.168.1.1 or 172.16.42.1 ?

[cxaqhq]

I scan 172.16.42.1 

[chrizree]

If it was me, I would do the firmware recovery again and make sure to use the correct recovery image and then upgrade to the latest firmware version (2.7.0). My Nano shows a newer version of nginx so you are at least not running the latest firmware version. Also remember that you need to "extend" your scanning options if you want port 1471 to show up when using nmap. It won't show in a standard scan and you have to include that port (or a range where that port is included) with the -p option/parameter.

[cxaqhq]

uboot flashed in the WiFi Pineapple NANO Recovery Firmware to return to normal.