Jump to content

"O.MG-CABLE-PROGRAMMER WAS NOT FOUND IN DEVICES"


Recommended Posts

Hi...first time user, old Unix hack from long ago...some knowledge... 😉

I am trying to setup my O.MG Cable out of the box, and following the guide here:

https://github.com/O-MG/O.MG_Cable-Firmware/wiki

I have attempted using each of the three flashers, with same results.

It seems like it does not see the USBtoUART device, even though it appears listed in /dev

howard@imac /dev % ls -l tty.*

crw-rw-rw-  1 root  wheel   18,   2 Aug  9 01:49 tty.Bluetooth-Incoming-Port

crw-rw-rw-  1 root  wheel   18,   0 Aug  9 02:43 tty.SLAB_USBtoUART

crw-rw-rw-  1 root  wheel   18,   4 Aug  9 01:58 tty.usbserial-0001

I removed the device and confirmed the devices are not present.

Here is the output of the scripts:
 

<<< ALL FIRMWARE FILES LOCATED >>>

<<< PROBING OSX DEVICES FOR O.MG-CABLE-PROGRAMMER >>>

esptool.py v2.6

Serial port /dev/cu.SLAB_USBtoUART

Connecting........_____....._____....._____....._____....._____....._____....._____

esptool.py v2.6

Serial port /dev/cu.usbserial-0001

<<< O.MG-CABLE-PROGRAMMER WAS NOT FOUND IN DEVICES, YOU MAY NEED TO INSTALL THE DRIVERS FOR CP210X USB BRIDGE >>>

VISIT: [ https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers ]

I did confirm that I have Python 3.8x installed, and updated it's pip:

howard@imac /dev % python3 -m pip --version

pip 20.2.1 from /Library/Frameworks/Python.framework/Versions/3.8/lib/python3.8/site-packages/pip (python 3.8)

From what I can tell, it either can't find the device, or it is looking for the wrong one...help?

Thanks in advance...looking forward to stumbling my way through a bunch of Hak5 tools over the next few days, so any pointers greatly appreciated! 

H
 

 

Link to post
Share on other sites

Thanks for noodling on this... and yes I checked, but I just checked again, and as indicated below, the system has installed the driver, and it is working......is " Location ID: 0x14100000 / 8" a clue?

I just wanna see dinosaurs... (ripping that off from here 1994)

😉

 

CP2102 USB to UART Bridge Controller:

 

  Product ID: 0xea60

  Vendor ID: 0x10c4  (Silicon Laboratories, Inc.)

  Version: 1.00

  Serial Number: 0001

  Speed: Up to 12 Mb/s

  Manufacturer: Silicon Labs

  Location ID: 0x14100000 / 8

  Current Available (mA): 500

  Current Required (mA): 100

  Extra Operating Current (mA): 0

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...