SirChance Posted July 25, 2020 Share Posted July 25, 2020 Hi everyone! Have you ever run into an instance where the Bash Bunny LEDs do not even come on? Asking for a friend... Link to comment Share on other sites More sharing options...
Struthian Posted July 25, 2020 Share Posted July 25, 2020 When it's not plugged in or when the led's are turned off. What else did your friend try to do? Access it's flash disk? What position was the switch in? Link to comment Share on other sites More sharing options...
SirChance Posted July 25, 2020 Author Share Posted July 25, 2020 When I (ahem, he) plugs the BB into a test computer the normal LEDs come on (green, blue, magenta) depending on the switch position. On a test computer (in arming mode), LEDs are fine and the BB can be accessed, payloads can be modified, etc. When the BB is plugged into the test computer in switch1 or switch2, LEDs come on and files are created as expected. However, when plugged into the actual victim machine for testing, no LEDs come on for switch1 or switch2...nothing, not even the Green boot LEDs. I even tried arming mode and still nothing. Link to comment Share on other sites More sharing options...
kuyaya Posted July 26, 2020 Share Posted July 26, 2020 There might be a problem with the usb ports of the victim PC, if the BB works fine on other computers. On my laptop, only one of the two usb ports is still working. There may be the same problem on that victim PC. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.