Jump to content
Foxtrot

[RELEASE] WiFi Pineapple Firmware v2.7.x

Recommended Posts

Hi!

We're pleased to announce a new release for the WiFi Pineapple TETRA: 2.7.0.

This update addresses some of the bugs reported by the great community here on the forums and in the Hak5 Discord, as well as updates to some community packages and updates to OpenWRT.

2.7.0 Changelog:

  • General
    • OpenWRT version is now 19.07.2.
    • Kernel has been updated from 4.14.133 to 4.14.171.
    • Fixed an issue where OpenVPN would cause a kernel panic upon establishing tunnel.
  • Recon
    • Fixed an issue where live scans would fail on the WiFi Pineapple TETRA.
  • Reporting
    • Fixed an issue where emails would not be sent.
    • Improved the user experience by automatically saving email settings when testing emails.
    • Improved the user experience by forcing an email to send when testing, regardless of whether the "Send Email" option was checked.
  • Advanced
    • Fixed an issue where swap would not be mounted automatically on the NANO's SD Card.
    • Renamed "USB" panel to "USB & Storage".
  • Misc
    • Added SSLSplit package to repositories.
      • This fixes the SSLSplit module dependencies.
    • Updated Kismet package in repositories.
    • Updated Kismet-RemoteCap package in repositories.
       

You can update your WiFi Pineapple TETRA Over-The-Air via the Advanced module or manually at the Hak5 Download Center.

- The Hak5 Development Team

  • Like 4

Share this post


Link to post
Share on other sites

I updated my Tetra to version 2.7.0.
After the update (opkg update) I downloaded openvpn-openssl. After that I tried to connect to my VPN with (openvpn client.ovpn). Did the tetra start flashing yellow and restarted after a while. Someone an idea what I'm doing wrong in the video How to Build an OpenVPN Access Point by Daren it works perfectly. With version 2.5.x everything worked great for me like in the video.

Share this post


Link to post
Share on other sites

Tried to update to 2.70. Now I cannot get past install the latest Software. It is just in an endless loop. I select the file version and try to upgrade the firmware. It loads the page Upgrade File Verified Successfully then goes back the page to select the firmware file. I have tried loading an earlier version with the same results.

Not sure what else to try other than to load the factory file. 

Share this post


Link to post
Share on other sites

No more than just a expensive toy.

The reaver doesn't work (wps), indicated 1.7 is actually 1.6.5 version, and it worked incorrectly on previous versions

When installing all add-ons, the web server does not work 172.16.42.1:1471, only work SSH.

Do not upgrade via opkg update! after update ur opgrade openwrt, the system is not working properly, you must perform recovery procedures to 2.4.1)

The application (get 1.2) does not download from server, and this is not the first problem

Dear developers, finish your product to a normal state.

Share this post


Link to post
Share on other sites
6 hours ago, APToni said:

The reaver doesn't work (wps), indicated 1.7 is actually 1.6.5 version, and it worked incorrectly on previous versions

Modules are third party, we don't make them - The community does.

6 hours ago, APToni said:

When installing all add-ons, the web server does not work 172.16.42.1:1471, only work SSH.

Which modules? Specifics are needed to diagnose potential issues.

6 hours ago, APToni said:

Do not upgrade via opkg update! after update ur opgrade openwrt, the system is not working properly, you must perform recovery procedures to 2.4.1)

Doesn't make any sense. Running "opkg update" doesn't update your device... it updates the package lists from the package repositories.

6 hours ago, APToni said:

The application (get 1.2) does not download from server, and this is not the first problem

Thanks, I can look into any modules that fail to download soon.

Share this post


Link to post
Share on other sites
On 4/1/2020 at 5:06 AM, Narus said:

Tried to update to 2.70. Now I cannot get past install the latest Software. It is just in an endless loop. I select the file version and try to upgrade the firmware. It loads the page Upgrade File Verified Successfully then goes back the page to select the firmware file. I have tried loading an earlier version with the same results.

Not sure what else to try other than to load the factory file. 

Sounds like you're upgrading from the stager (IE: a new unit)? Screenshots are useful in trying to diagnose issues, but it seems like it could be a caching issue? I'd suggest making a new thread for this.

Share this post


Link to post
Share on other sites
5 hours ago, Foxtrot said:

Modules are third party, we don't make them - The community does.

You post a product with a description that the problems have been fixed, I point out errors in the product, you answer me that these are not your problems, why confuse people?
Have you tried installing the update yourself and working with it?

Share this post


Link to post
Share on other sites
7 hours ago, Foxtrot said:

The reaver doesn't work (wps), indicated 1.7 is actually 1.6.5 version, and it worked incorrectly on previous versions

root@Pineapple:~# reaver
Error loading shared library libpcap.so.0.8: No such file or directory (needed by /usr/bin/reaver)
Error relocating /usr/bin/reaver: pcap_close: symbol not found
Error relocating /usr/bin/reaver: pcap_inject: symbol not found
Error relocating /usr/bin/reaver: pcap_set_snaplen: symbol not found
Error relocating /usr/bin/reaver: pcap_create: symbol not found
Error relocating /usr/bin/reaver: pcap_datalink: symbol not found
Error relocating /usr/bin/reaver: pcap_compile: symbol not found
Error relocating /usr/bin/reaver: pcap_set_promisc: symbol not found
Error relocating /usr/bin/reaver: pcap_open_offline: symbol not found
Error relocating /usr/bin/reaver: pcap_next_ex: symbol not found
Error relocating /usr/bin/reaver: pcap_setfilter: symbol not found
Error relocating /usr/bin/reaver: pcap_geterr: symbol not found
Error relocating /usr/bin/reaver: pcap_activate: symbol not found
Error relocating /usr/bin/reaver: pcap_set_timeout: symbol not found
Error relocating /usr/bin/reaver: pcap_set_rfmon: symbol not found
 

Share this post


Link to post
Share on other sites
On 4/26/2020 at 11:20 AM, fossguy said:

Any plans to release the sources for building OpenWrt 19.07 for the TETRA?

I would be very interested in a community version of this as well and would be happy to test making changes to my unit to see if I can resolve a few issues that I'm seeing as well.

Share this post


Link to post
Share on other sites

 

Reaver manual fix 2.7.0.

in terminal 

opkg update

opkg install libpcap

Share this post


Link to post
Share on other sites

Is anyone else having problems with the PineAP SSID Pool?  

I tried to manually add an AP and it either gave me an error:  "Must be between 1 and 32 characters"  (or something similar), or it said added successfully but the SSID Pool list stayed blank.  Then the unit rebooted.  Turned on Add SSID to Pool option and that triggered a series of successive reboots.  Has anyone else seen this with the recent patch?  I configured everything else and the reboot only triggered with this issue.

This regards upgrading from 2.6.x to version 2.7.0 on the Pineapple Tetra. 

Any suggestions?

Share this post


Link to post
Share on other sites
On 4/1/2020 at 1:06 AM, Narus said:

Tried to update to 2.70. Now I cannot get past install the latest Software. It is just in an endless loop. I select the file version and try to upgrade the firmware. It loads the page Upgrade File Verified Successfully then goes back the page to select the firmware file. I have tried loading an earlier version with the same results.

Not sure what else to try other than to load the factory file. 

Same thing here.

 

Hadn't pulled out the Tetra for several months. Factory reset and then Attempted to flash (from 2.4.2) to 2.7.0.

Hung on "The WiFi Pineapple is still booting..."   Waited about 7 hours - no change.

Unable to factory reset -- did I brick it??

Share this post


Link to post
Share on other sites
On 6/27/2020 at 2:43 PM, JeffP said:

Same thing here.

 

Hadn't pulled out the Tetra for several months. Factory reset and then Attempted to flash (from 2.4.2) to 2.7.0.

Hung on "The WiFi Pineapple is still booting..."   Waited about 7 hours - no change.

Unable to factory reset -- did I brick it??

Perform a factory reset.

https://docs.hak5.org/hc/en-us/articles/360010471774-Firmware-Recovery

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...