Foxtrot Posted March 12, 2020 Share Posted March 12, 2020 Hi! We're pleased to announce a new release for the WiFi Pineapple TETRA: 2.7.0. This update addresses some of the bugs reported by the great community here on the forums and in the Hak5 Discord, as well as updates to some community packages and updates to OpenWRT. 2.7.0 Changelog: General OpenWRT version is now 19.07.2. Kernel has been updated from 4.14.133 to 4.14.171. Fixed an issue where OpenVPN would cause a kernel panic upon establishing tunnel. Recon Fixed an issue where live scans would fail on the WiFi Pineapple TETRA. Reporting Fixed an issue where emails would not be sent. Improved the user experience by automatically saving email settings when testing emails. Improved the user experience by forcing an email to send when testing, regardless of whether the "Send Email" option was checked. Advanced Fixed an issue where swap would not be mounted automatically on the NANO's SD Card. Renamed "USB" panel to "USB & Storage". Misc Added SSLSplit package to repositories. This fixes the SSLSplit module dependencies. Updated Kismet package in repositories. Updated Kismet-RemoteCap package in repositories. You can update your WiFi Pineapple TETRA Over-The-Air via the Advanced module or manually at the Hak5 Download Center. ♥ - The Hak5 Development Team 5 Quote Link to comment Share on other sites More sharing options...
Olaf Mufjay Posted March 21, 2020 Share Posted March 21, 2020 I updated my Tetra to version 2.7.0. After the update (opkg update) I downloaded openvpn-openssl. After that I tried to connect to my VPN with (openvpn client.ovpn). Did the tetra start flashing yellow and restarted after a while. Someone an idea what I'm doing wrong in the video How to Build an OpenVPN Access Point by Daren it works perfectly. With version 2.5.x everything worked great for me like in the video. Quote Link to comment Share on other sites More sharing options...
Narus Posted April 1, 2020 Share Posted April 1, 2020 Tried to update to 2.70. Now I cannot get past install the latest Software. It is just in an endless loop. I select the file version and try to upgrade the firmware. It loads the page Upgrade File Verified Successfully then goes back the page to select the firmware file. I have tried loading an earlier version with the same results. Not sure what else to try other than to load the factory file. Quote Link to comment Share on other sites More sharing options...
APToni Posted April 6, 2020 Share Posted April 6, 2020 No more than just a expensive toy. The reaver doesn't work (wps), indicated 1.7 is actually 1.6.5 version, and it worked incorrectly on previous versions When installing all add-ons, the web server does not work 172.16.42.1:1471, only work SSH. Do not upgrade via opkg update! after update ur opgrade openwrt, the system is not working properly, you must perform recovery procedures to 2.4.1) The application (get 1.2) does not download from server, and this is not the first problem Dear developers, finish your product to a normal state. Quote Link to comment Share on other sites More sharing options...
Irukandji Posted April 6, 2020 Share Posted April 6, 2020 If you have any problems with the downloads. The downloads are available here. https://downloads.hak5.org/pineapple/tetra Quote Link to comment Share on other sites More sharing options...
APToni Posted April 6, 2020 Share Posted April 6, 2020 1 minute ago, Jtyle6 said: If you have any problems with the downloads. The downloads are available here. https://downloads.hak5.org/pineapple/tetra It’s a good idea to give everyone advice with reference to any problems), rather than trying to fix it Quote Link to comment Share on other sites More sharing options...
Foxtrot Posted April 6, 2020 Author Share Posted April 6, 2020 6 hours ago, APToni said: The reaver doesn't work (wps), indicated 1.7 is actually 1.6.5 version, and it worked incorrectly on previous versions Modules are third party, we don't make them - The community does. 6 hours ago, APToni said: When installing all add-ons, the web server does not work 172.16.42.1:1471, only work SSH. Which modules? Specifics are needed to diagnose potential issues. 6 hours ago, APToni said: Do not upgrade via opkg update! after update ur opgrade openwrt, the system is not working properly, you must perform recovery procedures to 2.4.1) Doesn't make any sense. Running "opkg update" doesn't update your device... it updates the package lists from the package repositories. 6 hours ago, APToni said: The application (get 1.2) does not download from server, and this is not the first problem Thanks, I can look into any modules that fail to download soon. Quote Link to comment Share on other sites More sharing options...
Foxtrot Posted April 6, 2020 Author Share Posted April 6, 2020 On 4/1/2020 at 5:06 AM, Narus said: Tried to update to 2.70. Now I cannot get past install the latest Software. It is just in an endless loop. I select the file version and try to upgrade the firmware. It loads the page Upgrade File Verified Successfully then goes back the page to select the firmware file. I have tried loading an earlier version with the same results. Not sure what else to try other than to load the factory file. Sounds like you're upgrading from the stager (IE: a new unit)? Screenshots are useful in trying to diagnose issues, but it seems like it could be a caching issue? I'd suggest making a new thread for this. Quote Link to comment Share on other sites More sharing options...
APToni Posted April 6, 2020 Share Posted April 6, 2020 5 hours ago, Foxtrot said: Modules are third party, we don't make them - The community does. You post a product with a description that the problems have been fixed, I point out errors in the product, you answer me that these are not your problems, why confuse people? Have you tried installing the update yourself and working with it? Quote Link to comment Share on other sites More sharing options...
APToni Posted April 6, 2020 Share Posted April 6, 2020 7 hours ago, Foxtrot said: The reaver doesn't work (wps), indicated 1.7 is actually 1.6.5 version, and it worked incorrectly on previous versions root@Pineapple:~# reaver Error loading shared library libpcap.so.0.8: No such file or directory (needed by /usr/bin/reaver) Error relocating /usr/bin/reaver: pcap_close: symbol not found Error relocating /usr/bin/reaver: pcap_inject: symbol not found Error relocating /usr/bin/reaver: pcap_set_snaplen: symbol not found Error relocating /usr/bin/reaver: pcap_create: symbol not found Error relocating /usr/bin/reaver: pcap_datalink: symbol not found Error relocating /usr/bin/reaver: pcap_compile: symbol not found Error relocating /usr/bin/reaver: pcap_set_promisc: symbol not found Error relocating /usr/bin/reaver: pcap_open_offline: symbol not found Error relocating /usr/bin/reaver: pcap_next_ex: symbol not found Error relocating /usr/bin/reaver: pcap_setfilter: symbol not found Error relocating /usr/bin/reaver: pcap_geterr: symbol not found Error relocating /usr/bin/reaver: pcap_activate: symbol not found Error relocating /usr/bin/reaver: pcap_set_timeout: symbol not found Error relocating /usr/bin/reaver: pcap_set_rfmon: symbol not found Quote Link to comment Share on other sites More sharing options...
fossguy Posted April 26, 2020 Share Posted April 26, 2020 Any plans to release the sources for building OpenWrt 19.07 for the TETRA? Quote Link to comment Share on other sites More sharing options...
cyrus104 Posted May 28, 2020 Share Posted May 28, 2020 On 4/26/2020 at 11:20 AM, fossguy said: Any plans to release the sources for building OpenWrt 19.07 for the TETRA? I would be very interested in a community version of this as well and would be happy to test making changes to my unit to see if I can resolve a few issues that I'm seeing as well. Quote Link to comment Share on other sites More sharing options...
APToni Posted May 31, 2020 Share Posted May 31, 2020 Well, when will the normal firmware be?)) Quote Link to comment Share on other sites More sharing options...
APToni Posted June 6, 2020 Share Posted June 6, 2020 Reaver manual fix 2.7.0. in terminal opkg update opkg install libpcap Quote Link to comment Share on other sites More sharing options...
MAC Jaeger Posted June 16, 2020 Share Posted June 16, 2020 Is anyone else having problems with the PineAP SSID Pool? I tried to manually add an AP and it either gave me an error: "Must be between 1 and 32 characters" (or something similar), or it said added successfully but the SSID Pool list stayed blank. Then the unit rebooted. Turned on Add SSID to Pool option and that triggered a series of successive reboots. Has anyone else seen this with the recent patch? I configured everything else and the reboot only triggered with this issue. This regards upgrading from 2.6.x to version 2.7.0 on the Pineapple Tetra. Any suggestions? Quote Link to comment Share on other sites More sharing options...
JeffP Posted June 27, 2020 Share Posted June 27, 2020 On 4/1/2020 at 1:06 AM, Narus said: Tried to update to 2.70. Now I cannot get past install the latest Software. It is just in an endless loop. I select the file version and try to upgrade the firmware. It loads the page Upgrade File Verified Successfully then goes back the page to select the firmware file. I have tried loading an earlier version with the same results. Not sure what else to try other than to load the factory file. Same thing here. Hadn't pulled out the Tetra for several months. Factory reset and then Attempted to flash (from 2.4.2) to 2.7.0. Hung on "The WiFi Pineapple is still booting..." Waited about 7 hours - no change. Unable to factory reset -- did I brick it?? Quote Link to comment Share on other sites More sharing options...
Void-Byte Posted August 3, 2020 Share Posted August 3, 2020 On 6/27/2020 at 2:43 PM, JeffP said: Same thing here. Hadn't pulled out the Tetra for several months. Factory reset and then Attempted to flash (from 2.4.2) to 2.7.0. Hung on "The WiFi Pineapple is still booting..." Waited about 7 hours - no change. Unable to factory reset -- did I brick it?? Perform a factory reset. https://docs.hak5.org/hc/en-us/articles/360010471774-Firmware-Recovery Quote Link to comment Share on other sites More sharing options...
runner514 Posted September 3, 2020 Share Posted September 3, 2020 Where is the Kismet package? Is it from the community repository or do we have to install via ssh? Quote Link to comment Share on other sites More sharing options...
Rinilyn Posted October 15, 2020 Share Posted October 15, 2020 On 4/6/2020 at 8:19 PM, APToni said: root@Pineapple:~# reaver Error loading shared library libpcap.so.0.8: No such file or directory (needed by /usr/bin/reaver) Error relocating /usr/bin/reaver: pcap_close: symbol not found Error relocating /usr/bin/reaver: pcap_inject: symbol not found Error relocating /usr/bin/reaver: pcap_set_snaplen: symbol not found Error relocating /usr/bin/reaver: pcap_create: symbol not found Error relocating /usr/bin/reaver: pcap_datalink: symbol not found Error relocating /usr/bin/reaver: pcap_compile: symbol not found Error relocating /usr/bin/reaver: pcap_set_promisc: symbol not found Error relocating /usr/bin/reaver: pcap_open_offline: symbol not found Error relocating /usr/bin/reaver: pcap_next_ex: symbol not found Error relocating /usr/bin/reaver: pcap_setfilter: symbol not found Error relocating /usr/bin/reaver: pcap_geterr: symbol not found Error relocating /usr/bin/reaver: pcap_activate: symbol not found Error relocating /usr/bin/reaver: pcap_set_timeout: symbol not found Error relocating /usr/bin/reaver: pcap_set_rfmon: symbol not found From what i saw, the problem here is that the libpcap.so.0.8 doesn't exist in /usr/lib/ . But instead, libpcap.so.1 does. On 6/6/2020 at 6:23 AM, APToni said: Reaver manual fix 2.7.0. in terminal opkg update opkg install libpcap This will do nothing at all but make things worse since this reaver relies on libpcap ran by older versions. I actually and tried to force install the reaver version added recently by adde88 https://github.com/adde88/openwrt-useful-tools, But that unfortunately didn't work for me too ( double checking later). I don't know how to edit reaver to read libpcap.so.1..im still learning and if you're still interested in this, make a different thread and ill gladly post any fix i find, Quote Link to comment Share on other sites More sharing options...
Just_a_User Posted October 15, 2020 Share Posted October 15, 2020 3 hours ago, Rinilyn said: But that unfortunately didn't work for me too Did you try a symbolic link to fool reaver into thinking its using its preferred version of libpcap? ln -s /usr/lib/libpcap.so /usr/lib/libpcap.so.1.3 #or maybe ln -s /usr/lib/libpcap.so.1 /usr/lib/libpcap.so.1.3 #or maybe ln -s /usr/lib/libpcap.so.0.8 /usr/lib/libpcap.so.1.3 Quote Link to comment Share on other sites More sharing options...
Rinilyn Posted October 15, 2020 Share Posted October 15, 2020 (edited) 4 hours ago, Just_a_User said: Did you try a symbolic link to fool reaver into thinking its using its preferred version of libpcap? ln -s /usr/lib/libpcap.so /usr/lib/libpcap.so.1.3 #or maybe ln -s /usr/lib/libpcap.so.1 /usr/lib/libpcap.so.1.3 #or maybe ln -s /usr/lib/libpcap.so.0.8 /usr/lib/libpcap.so.1.3 Genius! This fixes it: ln -s /usr/lib/libpcap.so.1.3 /usr/lib/libpcap.so.0.8 I had no idea i could do that. It wont work on the module though (Again, im running the custom version)..that needs a different process. Overall im happy and i can reaver with SSH now. Many thanks! Edited October 15, 2020 by Rinilyn Quote Link to comment Share on other sites More sharing options...
Just_a_User Posted October 15, 2020 Share Posted October 15, 2020 5 hours ago, Rinilyn said: I had no idea i could do that. It does not always work, if different versions implement new features or remove old then things can still break. But sometimes you get lucky. Sorry i got the link back to front, was working from memory away from kit. Glad your semi sorted though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.