Lo_Spettro Posted September 20, 2019 Share Posted September 20, 2019 Hi, I'm having trouble getting WPS to produce any scan results regardless of the interface or monitor mode I use. I'm familiar with kali-linux and so I'm not too much of a noob I don't think but I cannot for the life of me to get this module (with its dependencies installed on a microsd card as well as the WPS module itself) to produce any results. Even when I manually enter the BSSID and ESSID and channel and other fields the module doesn't run. I'm upgraded to the latest firmware. Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 20, 2019 Share Posted September 20, 2019 There have been issues with the latest firmware waiting for community modules to be updated so they are compatible with OpenWRT 19.x in firmware 2.6.x WPS when tested was not working on firmware 2.6.1 (latest firmware) so if you need the module to work do a firmware recovery (takes you to 2.4.1) and try the module. Several users have reported most modules working that way. Thread on tested modules in firmware 2.6.1 Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 21, 2019 Author Share Posted September 21, 2019 Thank you very much. Will do! Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 21, 2019 Author Share Posted September 21, 2019 2.4.1 is ways down there but I will flash the firmware if it helps the module work. I also hope to use it in concert with kali linux or commando vm with another external adapter. Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 21, 2019 Author Share Posted September 21, 2019 13 hours ago, Cap_Sig said: There have been issues with the latest firmware waiting for community modules to be updated so they are compatible with OpenWRT 19.x in firmware 2.6.x WPS when tested was not working on firmware 2.6.1 (latest firmware) so if you need the module to work do a firmware recovery (takes you to 2.4.1) and try the module. Several users have reported most modules working that way. Thread on tested modules in firmware 2.6.1 Cap_Sig , thank you for your help. 2.4.1 is many releases back, but I've downloaded it. I'm just wondering if I first need to restore the nano to factory settings before downgrading the firmware or if I can just flash the firmware as is. I've done this before but it's been a while and I didn't go as far down as 2.4.1. I did it successfully, I just can't remember the steps I did to do it. I'm using this resource at the moment: https://docs.hak5.org/hc/en-us/articles/360010471774-Firmware-Recovery Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 21, 2019 Share Posted September 21, 2019 10 hours ago, Lo_Spettro said: Cap_Sig , thank you for your help. 2.4.1 is many releases back, but I've downloaded it. I'm just wondering if I first need to restore the nano to factory settings before downgrading the firmware or if I can just flash the firmware as is. I've done this before but it's been a while and I didn't go as far down as 2.4.1. I did it successfully, I just can't remember the steps I did to do it. I'm using this resource at the moment: https://docs.hak5.org/hc/en-us/articles/360010471774-Firmware-Recovery Just follow the steps in the link. You just flash the firmware recovery bin. It doesn't matter what your current firmware version is and no factory reset is required prior to doing so. Make SURE to use the firmware recovery bin from the download page and not a upgrade bin. Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 22, 2019 Author Share Posted September 22, 2019 19 hours ago, Cap_Sig said: Just follow the steps in the link. You just flash the firmware recovery bin. It doesn't matter what your current firmware version is and no factory reset is required prior to doing so. Make SURE to use the firmware recovery bin from the download page and not a upgrade bin. Thank you!! Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 22, 2019 Author Share Posted September 22, 2019 Cap_Sig, I used the recovery image as instructed and everything looks good but I cannot get the pineapple to recognize my microsd card even when it says it has successfully formatted it. Was this feature supported back then? Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 22, 2019 Author Share Posted September 22, 2019 In any case, the scan will produce results now but the WPS module will still not run. Oh well Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 22, 2019 Share Posted September 22, 2019 3 hours ago, Lo_Spettro said: In any case, the scan will produce results now but the WPS module will still not run. Oh well Thanks for info. In the thread on module statuses that was recently reported as well by another user. This confirms it as well. Seems there is an issue with reaver and bully. Link to comment Share on other sites More sharing options...
Lo_Spettro Posted September 24, 2019 Author Share Posted September 24, 2019 On 9/22/2019 at 12:45 PM, Cap_Sig said: Thanks for info. In the thread on module statuses that was recently reported as well by another user. This confirms it as well. Seems there is an issue with reaver and bully. Sure thing Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.