Dwarfdard Posted September 15, 2019 Share Posted September 15, 2019 Hello, I have a problem with my USB Key alfa on kali linux. At the start of kali, she detect network, after i put in monitor mode with : airmon-ng check kill airmon-ng start wlan0 After i use, but i don't detect any network : airodump-ng wlan0mon After i put it in managed mode : airmon-ng start wlan0 service NetworkManager restart But she not detect network, i have juste the wifi icon. If you have any idea, tell me please. Good day. Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 15, 2019 Share Posted September 15, 2019 If you have not yet, read through this: https://docs.kali.org/installation/troubleshooting-wireless-driver-issues Posting dmesg for the adapter will provide more information for users to help. Link to comment Share on other sites More sharing options...
Dwarfdard Posted September 15, 2019 Author Share Posted September 15, 2019 Ok, thanks you for answer. root@Bonjour:~# lsusb Bus 001 Device 005: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter root@Bonjour:~# dmesg [ 30.475642] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 30.485515] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 30.523750] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 30.523940] usbcore: registered new interface driver rt2800usb [ 30.565971] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 30.576212] rt2800usb 1-8:1.0: firmware: direct-loading firmware rt2870.bin [ 30.576216] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 30.868343] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71 [ 32.115190] ieee80211 phy0: rt2800_wait_csr_ready: Error - Unstable hardware [ 32.115196] ieee80211 phy0: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) [ 35.666467] fuse: init (API version 7.31) [ 42.807478] rfkill: input handler disabled root@Bonjour:~# dmesg | tail [ 30.523750] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 30.523940] usbcore: registered new interface driver rt2800usb [ 30.565971] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 30.576212] rt2800usb 1-8:1.0: firmware: direct-loading firmware rt2870.bin [ 30.576216] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 30.868343] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71 [ 32.115190] ieee80211 phy0: rt2800_wait_csr_ready: Error - Unstable hardware [ 32.115196] ieee80211 phy0: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) [ 35.666467] fuse: init (API version 7.31) [ 42.807478] rfkill: input handler disabled root@Bonjour:~# airmon-ng start wlan0 Found 2 processes that could cause trouble. Kill them using 'airmon-ng check kill' before putting the card in monitor mode, they will interfere by changing channels and sometimes putting the interface back in managed mode PID Name 628 NetworkManager 790 wpa_supplicant PHY Interface Driver Chipset phy0 wlan0 rt2800usb Ralink Technology, Corp. RT2870/RT3070 (mac80211 monitor mode vif enabled for [phy0]wlan0 on [phy0]wlan0mon) (mac80211 station mode vif disabled for [phy0]wlan0) root@Bonjour:~# aireplay-ng wlan0mon -9 14:06:10 Trying broadcast probe requests... 14:06:12 No Answer... 14:06:12 Found 0 APs root@Bonjour:~# rfkill ID TYPE DEVICE SOFT HARD 0 wlan phy0 unblocked unblocked Thanks for help. Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 15, 2019 Share Posted September 15, 2019 What are you running Kali on? Live ISO, VM, HDD install ? If VM, what software? 2 hours ago, Dwarfdard said: [ 30.868343] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71 [ 32.115190] ieee80211 phy0: rt2800_wait_csr_ready: Error - Unstable hardware [ 32.115196] ieee80211 phy0: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) Seen this before with VirtualBox Link to comment Share on other sites More sharing options...
Dwarfdard Posted September 15, 2019 Author Share Posted September 15, 2019 Install on HDD. Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 15, 2019 Share Posted September 15, 2019 Looks like it might be a power issue. Link to comment Share on other sites More sharing options...
Dwarfdard Posted September 15, 2019 Author Share Posted September 15, 2019 Yet on windows it works perfectly. Link to comment Share on other sites More sharing options...
Cap_Sig Posted September 15, 2019 Share Posted September 15, 2019 42 minutes ago, Dwarfdard said: Yet on windows it works perfectly. I guess to rule out power issue is that on the same system that Kali is on, dual boot? Did you buy a genuine Alfa adapter? Some of the knock offs cause issues in Kali. The RT3070 chipset should be plug and play as long as you didn't load any other drivers manually into Kali. Link to comment Share on other sites More sharing options...
Dwarfdard Posted September 15, 2019 Author Share Posted September 15, 2019 Yes i have a dual boot. Yes i had buy a real alfa product. Link to comment Share on other sites More sharing options...
ramondunker Posted January 5, 2020 Share Posted January 5, 2020 Has anyone found a fix to this? I'm having the same issues. I'm running dual-boot Kali Linux with MacOS. Help would be really appreciated! uname -r: Quote 5.3.0-kali3-amd64 dmesg: Quote [ 7.241168] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 7.242712] rt2800usb 1-8:1.0: firmware: direct-loading firmware rt2870.bin [ 7.244206] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 7.978399] broken atomic modeset userspace detected, disabling atomic [ 9.866205] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71 [ 10.483024] rfkill: input handler disabled [ 11.129655] ieee80211 phy1: rt2800_wait_csr_ready: Error - Unstable hardware [ 11.129660] ieee80211 phy1: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5) [ 16.724466] rfkill: input handler enabled [ 16.750072] broken atomic modeset userspace detected, disabling atomic [ 18.659124] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 19.014032] traps: light-locker[1233] trap int3 ip:7fbac9856e25 sp:7ffce5f3cb60 error:0 in libglib-2.0.so.0.6200.4[7fbac981d000+80000] [ 20.890655] ieee80211 phy0: brcmf_inetaddr_changed: fail to get arp ip table err:-52 lsusb: Quote Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 001 Device 003: ID 05ac:8600 Apple, Inc. iBridge Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub iwconfig: Quote wlan1 IEEE 802.11 ESSID:"XXXXXX" Mode:Managed Frequency:5.26 GHz Access Point: XXXXXX Bit Rate=108 Mb/s Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=33/70 Signal level=-77 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wlan0 IEEE 802.11 ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry short long limit:2 RTS thr:off Fragment thr:off Encryption key:off Power Management:off lo no wireless extensions. Link to comment Share on other sites More sharing options...
teroclro Posted May 30, 2020 Share Posted May 30, 2020 On 9/15/2019 at 12:41 PM, Cap_Sig said: If you have not yet, read through this: https://docs.kali.org/installation/troubleshooting-wireless-driver-issues Posting dmesg for the adapter will provide more information for users to help. never found it much use the problem he has is covered by countless forums all to no avail Link to comment Share on other sites More sharing options...
Mauley Posted May 31, 2020 Share Posted May 31, 2020 I do have the exact same problem. Same WiFi stick on Kali 2020. I cant solve it.. My stick does work on Windows perfectly. But not in a Kali 2020 VM and not on a installation on hdd. It does work on the Kali Live CD (WHY EVER??). I installed it with that live cd and it doesnt work again. wlan1 -> device not ready "error - unstable hardware" "device failed to enter state 4 (-5) Link to comment Share on other sites More sharing options...
Mauley Posted May 31, 2020 Share Posted May 31, 2020 Okay, it doesnt seem to work in the live cd anymore as well.. Link to comment Share on other sites More sharing options...
Mauley Posted May 31, 2020 Share Posted May 31, 2020 But it seems to work on a different notebook with a live cd (same image). Can someone help me to get it work on my first Notebook as well? Link to comment Share on other sites More sharing options...
Bob123 Posted June 1, 2020 Share Posted June 1, 2020 So in vmware it seems that I can get the AWUS036NEH to work on Kali 2019.2 and before but NOT Kali 2019.3 and forward. Using uname -r I get: Kali 2019.2 => 4.19.0-kali4-amd64 Kali 2019.3 => 5.2.0-kali2-amd64 So I guess when the kernel went from 4 to 5 we lost support for the AWUS036NEH. I also have an AWUS051NH and so far it works on everything up to 2019.4. I haven't tried the 2020's yet as I have to modify my VMs and I haven't done that yet. I'm also downloading the ISOs as I want to see if the AWUS036NEH's work in those as Mauley stated. I'm curious why it would work in an ISO and not on an installed OS or VM. I'll update when I have more info. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.