Jump to content
CorruptedKernel

TCPDUMP payload not working and shutting down after boot.

Recommended Posts

Hey guys,

So I made my purchase of the packet squirrel and I have made sure I set the ethernet cables in the right place for sniffing traffic. Now for some reason when I put the button all the way to the TCPDUMP payload and start it up, I get the Green flashing at the start (Booting) and then right after that the Packet Squirrel shuts down. Have no idea why this is happening. I also was having an error with all my USBs I have. I go to format them as usual with Windows as ExFAT or NTFS and they can't be read? I also ssh'd into the squirrel under the armed mode just fine and did format_usb but same result none of my usbs are working. They are all different also, Anyone know whats going on here, was really looking forward to using this. I also upgraded to the latest firmware after buying and had no issues with the upgrade.

Since I can't insert a picture from the "Insert image from URL" because of HTTPS or something I have uploaded here:

https://ibb.co/s1xbC6h

https://imgur.com/a/P93Jr6o

Thanks

Share this post


Link to post
Share on other sites
35 minutes ago, CorruptedKernel said:

I think it may read the USB if i run the TCPDUMP payload it will just flash red after boot on this other USB

Is the drive formatted to NTFS or EXT4?

Share this post


Link to post
Share on other sites

Sorry, I forgot there is an bug with it.

Share this post


Link to post
Share on other sites

Hey again, I saw some other threads just now about the people having issues with 3.0 upgrade. I am trying to also get into recovery mode to downgrade by pressing the push button for 3-7 seconds once I see the packet squirrel booting up. For some reason nothing happens and it just goes into normal arming mode through ssh. I won't let me view 192.168.1.1 even if I set a static IP. Basically once I see the squirrel boot up and it's green I hold down the push button but won't go into recovery.. If anyone has any suggestions let me know!

 

Thanks!

Share this post


Link to post
Share on other sites
3 minutes ago, CorruptedKernel said:

Hey again, I saw some other threads just now about the people having issues with 3.0 upgrade. I am trying to also get into recovery mode to downgrade by pressing the push button for 3-7 seconds once I see the packet squirrel booting up. For some reason nothing happens and it just goes into normal arming mode through ssh. I won't let me view 192.168.1.1 even if I set a static IP. Basically once I see the squirrel boot up and it's green I hold down the push button but won't go into recovery.. If anyone has any suggestions let me know!

 

Thanks!

Press and hold the button before you plug in the power, then let go between 3 to 7 seconds  later.

  • Like 1

Share this post


Link to post
Share on other sites
20 hours ago, ToxicAtomicDog said:

Press and hold the button before you plug in the power, then let go between 3 to 7 seconds  later.

Thanks Toxic, I was able to recover the firmware and downgrade to 2.0. Now the Squirrel works great for capturing. Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...