LeonX Posted June 18, 2019 Share Posted June 18, 2019 Hello! I know this issue has already been reported, but I could not find a solution with other posts. Description: I ran 'wifiphisher -fH' in my console, looks all good, then I select my wifi in the new windows, and then I select 'Network Manager Connect' since I would like to use this. I try to connect to the AP through my iPhone, but I just receive the message Unable to join the network "mynetworkname" on my phone when I try. I really don't know how to fix this. I put below some information, please let me know if I can add further information that could help you to understand more. Thank you very much for your help. System details: root@leon:~# uname -a Linux leon 4.19.0-kali5-amd64 #1 SMP Debian 4.19.37-2kali1 (2019-05-15) x86_64 GNU/Linux root@leon:~# iwconfig wlan1mon IEEE 802.11 ESSID:"motherfucker" Mode:Managed Frequency:2.452 GHz Access Point: 14:B9:68:D4:BE:F5 Bit Rate=150 Mb/s Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:31 Missed beacon:0 lo no wireless extensions. wlan0 IEEE 802.11 ESSID:"motherfucker" Mode:Managed Frequency:2.452 GHz Access Point: 14:B9:68:D4:BE:F5 Bit Rate=130 Mb/s Tx-Power=200 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@leon:~/Desktop/wifi# ifconfig eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether ac:87:a3:39:01:6a txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 😎 RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 😎 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 66 bytes 3582 (3.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 66 bytes 3582 (3.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::3f5a:e200:9037:e4b5 prefixlen 64 scopeid 0x20 ether b8:09:8a:d7:22:f3 txqueuelen 1000 (Ethernet) RX packets 82 bytes 8014 (7.8 KiB) RX errors 0 dropped 0 overruns 0 frame 968 TX packets 36 bytes 4181 (4.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 18 wlan1mon: flags=867<UP,BROADCAST,NOTRAILERS,RUNNING,PROMISC,ALLMULTI> mtu 1400 inet 192.168.1.6 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::1be0:744:e974:e7ee prefixlen 64 scopeid 0x20 ether 00:11:22:33:44:55 txqueuelen 1000 (Ethernet) RX packets 301386 bytes 87138463 (83.1 MiB) RX errors 0 dropped 194998 overruns 0 frame 0 TX packets 4673 bytes 693883 (677.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@leon:~/Desktop/wifi# airmon-ng PHY Interface Driver Chipset phy0 wlan0 wl Broadcom Limited BCM4360 802.11ac Wireless Network Adapter (rev 03) phy1 wlan1mon ath9k_htc Qualcomm Atheros Communications AR9271 802.11n Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.