Jump to content

[RELEASE] WiFi Pineapple Firmware v2.5.x


Foxtrot

Recommended Posts

On 3/28/2019 at 4:01 PM, Foxtrot said:

Hi everyone,

We just released firmware version 2.5.x for the WiFi Pineapple, vastly improving the PineAP engine. Expect greater results on your next wireless engagement with this release.

Changelog 2.5.4:

  • Recon
    • Fixed an issue where scan times would be invalid in non-Chromium web browsers.

Changelog 2.5.3:

  • Clients
    • Fixed an issue where SSIDs would not populate.
  • Filters
    • Add detailed Filters information.
  • Setup
    • Choosing the Filter modes is now required upon Setup.
  • Recon
    • Fixed an issue where, in some cases, probes would not be shown in the Recon dialog.
    • Fixed an issue where some probes were not logged during a Recon scan.
    • Fixed an issue where, in some cases, handshakes would not be captured.
    • Fixed an issue where captured handshakes could not be downloaded if the capture had stopped.
    • Fixed an issue where, in some cases, captured handshakes would have invalid frame lengths.
    • Previous scan dates are now translated to the browsers local time.
    • Fixed a rare issue where Live Scan results would not populate in the Web UI.
  • PineAP
    • Fixed an issue where downloading captured handshakes would not work.

Changelog 2.5.2:

  • Recon
    • Fixed an issue where invalid results with BSSID 00:00:00:00:00:00 would be collected.
    • Fixed an issue where changing the band to scan would not update until PineAP was restarted.
    • Fixed a firewall issue preventing Live recon results to populate in the Web UI.

Changelog 2.5.1:

  • Misc
    • Fix an issue where "Unsupported Device" would incorrectly show.

Changelog 2.5.0:

  • Hak5 Cloud C2
    • Client Update
  • PineAP
    • Rewrite of PineAP, featuring a multitude of improvements and reliability fixes.
  • Recon
    • Improved reliability of scanning.
    • Add throbber for deauth button.
    • Automatically start scan after enabling PineAP.
    • Remove misleading information message when the user started their first scan.
    • Fixed a rare issue where multiple live Recon processes would start.
  • Misc
    • Reduce amount of Web UI HTTP requests.
    • Fix missing paths on the WiFi Pineapple NANO.

Download: Over the air via your WiFi Pineapples webinterface, or at https://downloads.hak5.org.

 - The Hak5 Development Team

when i go to recon and press start it says pineap needs to be enable when clicking to enable it it wont enable and thus being unable to do scans . ON current update 2.5.4

Link to comment
Share on other sites

  • 4 weeks later...
  • Replies 54
  • Created
  • Last Reply

My SSID's in Pool are not populating. I also noticed that the SSID's added this session is not updating correctly. I am running firmware 2.5.4 so a little confused as I thought the issue was fixed in 2.5.3.. Below is the debug log. Any ideas on what I should do. I am running a MacBook with Fusion on it which runs my Kali linux install.

 

============CPUINFO========
system type        : Atheros AR9344 rev 3
machine            : WiFi Pineapple TETRA
processor        : 0
cpu model        : MIPS 74Kc V4.12
BogoMIPS        : 278.93
wait instruction    : yes
microsecond timers    : yes
tlb_entries        : 32
extra interrupt vector    : yes
hardware watchpoint    : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa            : mips1 mips2 mips32r1 mips32r2
ASEs implemented    : mips16 dsp dsp2
shadow register sets    : 1
kscratch registers    : 0
package            : 0
core            : 0
VCED exceptions        : not available
VCEI exceptions        : not available

Firmware Version: 2.5.4
=============LSUSB=========
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==============DF===========
Filesystem                Size      Used Available Use% Mounted on
rootfs                    1.8G      3.7M      1.8G   0% /
/dev/root                12.5M     12.5M         0 100% /rom
tmpfs                    61.4M    128.0K     61.3M   0% /tmp
/dev/ubi0_1               1.8G      3.7M      1.8G   0% /overlay
overlayfs:/overlay        1.8G      3.7M      1.8G   0% /
tmpfs                   512.0K         0    512.0K   0% /dev
==============IW===========
phy#1
    Interface wlan1mon
        ifindex 9
        wdev 0x100000003
        addr 00:13:37:a6:c3:10
        type monitor
        channel 10 (2457 MHz), width: 20 MHz (no HT), center1: 2457 MHz
        txpower 30.00 dBm
phy#0
    Interface wlan0
        ifindex 8
        wdev 0x2
        addr 00:13:37:a6:c3:0f
        ssid free_wifi
        type AP
        channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
        txpower 30.00 dBm
===========IFCONFIG========
br-lan    Link encap:Ethernet  HWaddr 00:13:37:A6:C3:0F  
          inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5050 errors:0 dropped:66 overruns:0 frame:0
          TX packets:6121 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:574351 (560.8 KiB)  TX bytes:4294922 (4.0 MiB)

eth0      Link encap:Ethernet  HWaddr 00:13:37:A6:C3:11  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:5

eth1      Link encap:Ethernet  HWaddr 00:13:37:A6:C3:0F  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5113 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6146 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:658817 (643.3 KiB)  TX bytes:4296148 (4.0 MiB)
          Interrupt:4

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:7427 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7427 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:709171 (692.5 KiB)  TX bytes:709171 (692.5 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:13:37:A6:C3:0F  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2611 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:181810 (177.5 KiB)

wlan1mon  Link encap:UNSPEC  HWaddr 00-13-37-A6-C3-10-00-44-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5026 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1045346 (1020.8 KiB)  TX bytes:0 (0.0 B)

===========IWCONFIG========
lo        no wireless extensions.

eth1      no wireless extensions.

eth0      no wireless extensions.

br-lan    no wireless extensions.

wlan0     IEEE 802.11abgn  Mode:Master  Tx-Power=30 dBm   
          RTS thr:off   Fragment thr:off
          Power Management:off
          
wlan1mon  IEEE 802.11abgn  Mode:Monitor  Frequency:2.457 GHz  Tx-Power=30 dBm   
          RTS thr:off   Fragment thr:off
          Power Management:off
          
============DMESG==========
[    0.000000] Linux version 3.18.84 (@40c3d6544cfc) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #34 Thu Apr 25 20:27:22 UTC 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9344 rev 3
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803a7cf0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=PINEAPPLE-TETRA console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),256k(caldata),-(mb0);ar934x-nfc:2048k(kernel),-(ubi) rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125668K/131072K available (2748K kernel code, 126K rwdata, 580K rodata, 184K init, 187K bss, 5404K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is WiFi Pineapple TETRA
[    0.100000] ar71xx: using random MAC address for eth0
[    0.320000] ar71xx: using random MAC address for eth1
[    0.540000] registering PCI controller with io_map_base unset
[    0.550000] PCI host bridge to bus 0000:00
[    0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.560000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.560000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.570000] pci 0000:00:00.0: [168c:abcd] type 00 class 0x020000
[    0.570000] pci 0000:00:00.0: invalid calibration data
[    0.570000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[    0.570000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.570000] pci 0000:00:00.0: supports D1
[    0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.570000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[    0.580000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[    0.580000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.590000] Switched to clocksource MIPS
[    0.590000] NET: Registered protocol family 2
[    0.600000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.600000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.610000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.620000] TCP: reno registered
[    0.620000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.630000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.630000] NET: Registered protocol family 1
[    0.640000] PCI: CLS 0 bytes, default 32
[    0.640000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.670000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.670000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.680000] msgmni has been set to 245
[    0.690000] io scheduler noop registered
[    0.690000] io scheduler deadline registered (default)
[    0.700000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.710000] console [ttyS0] disabled
[    0.730000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.740000] console [ttyS0] enabled
[    0.750000] bootconsole [early0] disabled
[    0.760000] m25p80 spi0.0: found s25fl008k, expected m25p80
[    0.760000] m25p80 spi0.0: s25fl008k (1024 Kbytes)
[    0.770000] 4 cmdlinepart partitions found on MTD device spi0.0
[    0.770000] Creating 4 MTD partitions on "spi0.0":
[    0.780000] 0x000000000000-0x000000040000 : "u-boot"
[    0.790000] 0x000000040000-0x000000080000 : "u-boot-env"
[    0.790000] 0x000000080000-0x0000000c0000 : "caldata"
[    0.800000] 0x0000000c0000-0x000000100000 : "mb0"
[    0.800000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    0.810000] nand: Micron MT29F16G08ABABAWP 2GiB 3.3V 8-bit
[    0.820000] nand: 2048MiB, SLC, page size: 4096, OOB size: 224
[    0.820000] Scanning device for bad blocks
[    1.100000] random: nonblocking pool is initialized
[    1.110000] 2 cmdlinepart partitions found on MTD device ar934x-nfc
[    1.110000] Creating 2 MTD partitions on "ar934x-nfc":
[    1.120000] 0x000000000000-0x000000200000 : "kernel"
[    1.120000] 0x000000200000-0x000080000000 : "ubi"
[    1.140000] libphy: ag71xx_mdio: probed
[    1.730000] ag71xx-mdio.1: Found an AR934X built-in switch
[    1.770000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.370000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[    2.380000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.380000] TCP: cubic registered
[    2.390000] NET: Registered protocol family 17
[    2.390000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.410000] 8021q: 802.1Q VLAN Support v1.8
[    2.410000] UBI: auto-attach mtd5
[    2.420000] UBI: attaching mtd5 to ubi0
[   15.030000] UBI: scanning is finished
[   15.060000] UBI: attached mtd5 (name "ubi", size 2046 MiB) to ubi0
[   15.060000] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes
[   15.070000] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[   15.080000] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
[   15.080000] UBI: good PEBs: 4092, bad PEBs: 0, corrupted PEBs: 0
[   15.090000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[   15.100000] UBI: max/mean erase counter: 101/1, WL threshold: 4096, image sequence number: 858528783
[   15.110000] UBI: available PEBs: 0, total reserved PEBs: 4092, PEBs reserved for bad PEB handling: 80
[   15.120000] UBI: background thread "ubi_bgt0d" started, PID 243
[   15.120000] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[   15.130000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[   15.140000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[   15.150000] Freeing unused kernel memory: 184K
[   16.780000] init: Console is alive
[   16.790000] init: - watchdog -
[   18.760000] usbcore: registered new interface driver usbfs
[   18.770000] usbcore: registered new interface driver hub
[   18.770000] usbcore: registered new device driver usb
[   18.820000] SCSI subsystem initialized
[   18.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.840000] ehci-platform: EHCI generic platform driver
[   18.840000] ehci-platform ehci-platform: EHCI Host Controller
[   18.850000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[   18.860000] ehci-platform ehci-platform: TX-TX IDP fix enabled
[   18.870000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[   18.890000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[   18.890000] hub 1-0:1.0: USB hub found
[   18.900000] hub 1-0:1.0: 1 port detected
[   18.900000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.910000] ohci-platform: OHCI generic platform driver
[   18.920000] uhci_hcd: USB Universal Host Controller Interface driver
[   18.930000] usbcore: registered new interface driver usb-storage
[   19.870000] init: - preinit -
[   21.380000] mount_root: loading kmods from internal overlay
[   21.790000] UBIFS: background thread "ubifs_bgt0_1" started, PID 335
[   22.170000] UBIFS: recovery needed
[   22.970000] UBIFS: recovery completed
[   22.980000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   22.980000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[   22.990000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
[   23.000000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[   23.010000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9BA5D2A7-404C-44D0-87BA-EB0721105CD6, small LPT model
[   23.020000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   23.050000] block: extroot: not configured
[   23.050000] UBIFS: un-mount UBI device 0, volume 1
[   23.060000] UBIFS: background thread "ubifs_bgt0_1" stops
[   23.070000] UBIFS: background thread "ubifs_bgt0_1" started, PID 338
[   23.750000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   23.750000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[   23.760000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
[   23.770000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[   23.780000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9BA5D2A7-404C-44D0-87BA-EB0721105CD6, small LPT model
[   23.800000] mount_root: loading kmods from internal overlay
[   24.030000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   24.050000] block: extroot: not configured
[   24.060000] mount_root: switching to jffs2 overlay
[   24.120000] procd: - early -
[   24.120000] procd: - watchdog -
[   24.970000] procd: - ubus -
[   26.020000] procd: - init -
[   28.330000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   28.340000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   28.460000] ath: EEPROM regdomain: 0x0
[   28.460000] ath: EEPROM indicates default country code should be used
[   28.460000] ath: doing EEPROM country->regdmn map search
[   28.460000] ath: country maps to regdmn code: 0x3a
[   28.460000] ath: Country alpha2 being used: US
[   28.460000] ath: Regpair used: 0x3a
[   28.470000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   28.480000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
[   28.480000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   28.510000] ath: EEPROM regdomain: 0x0
[   28.510000] ath: EEPROM indicates default country code should be used
[   28.510000] ath: doing EEPROM country->regdmn map search
[   28.510000] ath: country maps to regdmn code: 0x3a
[   28.510000] ath: Country alpha2 being used: US
[   28.510000] ath: Regpair used: 0x3a
[   28.520000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   28.530000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[   28.540000] usbcore: registered new interface driver ath9k_htc
[   28.570000] RPC: Registered named UNIX socket transport module.
[   28.570000] RPC: Registered udp transport module.
[   28.580000] RPC: Registered tcp transport module.
[   28.580000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   28.610000] tun: Universal TUN/TAP device driver, 1.6
[   28.610000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   28.840000] usbcore: registered new interface driver rt2800usb
[   28.860000] usbcore: registered new interface driver rtl8187
[   28.890000] usbcore: registered new interface driver rtl8192cu
[   28.930000] usbcore: registered new interface driver cdc_acm
[   28.940000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   28.950000] usbcore: registered new interface driver cdc_wdm
[   28.960000] nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
[   29.040000] usbcore: registered new interface driver ums-alauda
[   29.070000] usbcore: registered new interface driver ums-cypress
[   29.080000] usbcore: registered new interface driver ums-datafab
[   29.090000] usbcore: registered new interface driver ums-freecom
[   29.100000] usbcore: registered new interface driver ums-isd200
[   29.110000] usbcore: registered new interface driver ums-jumpshot
[   29.120000] usbcore: registered new interface driver ums-karma
[   29.130000] usbcore: registered new interface driver ums-sddr09
[   29.130000] usbcore: registered new interface driver ums-sddr55
[   29.140000] usbcore: registered new interface driver ums-usbat
[   29.170000] usbcore: registered new interface driver usbserial
[   29.170000] usbcore: registered new interface driver usbserial_generic
[   29.180000] usbserial: USB Serial support registered for generic
[   29.250000] xt_time: kernel timezone is -0000
[   29.260000] usbcore: registered new interface driver asix
[   29.270000] usbcore: registered new interface driver ax88179_178a
[   29.280000] usbcore: registered new interface driver cdc_ether
[   29.290000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.300000] usbcore: registered new interface driver pl2303
[   29.310000] usbserial: USB Serial support registered for pl2303
[   29.320000] PPP generic driver version 2.4.2
[   29.330000] NET: Registered protocol family 24
[   29.340000] usbcore: registered new interface driver qmi_wwan
[   29.350000] usbcore: registered new interface driver rndis_host
[   29.360000] usbcore: registered new interface driver sierra_net
[   29.370000] usbcore: registered new interface driver option
[   29.380000] usbserial: USB Serial support registered for GSM modem (1-port)
[   39.230000] device eth1 entered promiscuous mode
[   39.230000] br-lan: port 1(eth1) entered forwarding state
[   39.240000] br-lan: port 1(eth1) entered forwarding state
[   39.480000] br-lan: port 1(eth1) entered disabled state
[   41.520000] eth1: link up (100Mbps/Full duplex)
[   41.520000] br-lan: port 1(eth1) entered forwarding state
[   41.530000] br-lan: port 1(eth1) entered forwarding state
[   43.530000] br-lan: port 1(eth1) entered forwarding state
[   44.260000] device wlan0 entered promiscuous mode
[   44.300000] br-lan: port 2(wlan0) entered forwarding state
[   44.310000] br-lan: port 2(wlan0) entered forwarding state
[   46.310000] br-lan: port 2(wlan0) entered forwarding state
[ 1804.120000] eth1: link down
[ 1804.120000] br-lan: port 1(eth1) entered disabled state
[ 1828.120000] eth1: link up (100Mbps/Full duplex)
[ 1828.120000] br-lan: port 1(eth1) entered forwarding state
[ 1828.130000] br-lan: port 1(eth1) entered forwarding state
[ 1830.130000] br-lan: port 1(eth1) entered forwarding state
[ 1848.120000] eth1: link down
[ 1848.120000] br-lan: port 1(eth1) entered disabled state
[ 1850.120000] eth1: link up (100Mbps/Full duplex)
[ 1850.120000] br-lan: port 1(eth1) entered forwarding state
[ 1850.130000] br-lan: port 1(eth1) entered forwarding state
[ 1852.130000] br-lan: port 1(eth1) entered forwarding state
[ 3908.120000] eth1: link down
[ 3908.120000] br-lan: port 1(eth1) entered disabled state
[ 3910.120000] eth1: link up (100Mbps/Full duplex)
[ 3910.120000] br-lan: port 1(eth1) entered forwarding state
[ 3910.130000] br-lan: port 1(eth1) entered forwarding state
[ 3912.130000] br-lan: port 1(eth1) entered forwarding state
[ 4218.120000] eth1: link down
[ 4218.120000] br-lan: port 1(eth1) entered disabled state
[ 4219.120000] eth1: link up (100Mbps/Full duplex)
[ 4219.120000] br-lan: port 1(eth1) entered forwarding state
[ 4219.130000] br-lan: port 1(eth1) entered forwarding state
[ 4221.130000] br-lan: port 1(eth1) entered forwarding state
============LOGREAD========
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   22.980000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   22.980000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   22.990000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.000000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.010000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9BA5D2A7-404C-44D0-87BA-EB0721105CD6, small LPT model
Mon Jun 24 12:49:04 2019 user.info kernel: [   23.020000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Mon Jun 24 12:49:04 2019 user.info kernel: [   23.050000] block: extroot: not configured
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.050000] UBIFS: un-mount UBI device 0, volume 1
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.060000] UBIFS: background thread "ubifs_bgt0_1" stops
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.070000] UBIFS: background thread "ubifs_bgt0_1" started, PID 338
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.750000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.750000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.760000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.770000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
Mon Jun 24 12:49:04 2019 kern.notice kernel: [   23.780000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 9BA5D2A7-404C-44D0-87BA-EB0721105CD6, small LPT model
Mon Jun 24 12:49:04 2019 user.info kernel: [   23.800000] mount_root: loading kmods from internal overlay
Mon Jun 24 12:49:04 2019 user.info kernel: [   24.030000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Mon Jun 24 12:49:04 2019 user.info kernel: [   24.050000] block: extroot: not configured
Mon Jun 24 12:49:04 2019 user.info kernel: [   24.060000] mount_root: switching to jffs2 overlay
Mon Jun 24 12:49:04 2019 user.info kernel: [   24.120000] procd: - early -
Mon Jun 24 12:49:04 2019 user.info kernel: [   24.120000] procd: - watchdog -
Mon Jun 24 12:49:04 2019 user.info kernel: [   24.970000] procd: - ubus -
Mon Jun 24 12:49:04 2019 user.info kernel: [   26.020000] procd: - init -
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.330000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.340000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.460000] ath: EEPROM regdomain: 0x0
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.460000] ath: EEPROM indicates default country code should be used
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.460000] ath: doing EEPROM country->regdmn map search
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.460000] ath: country maps to regdmn code: 0x3a
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.460000] ath: Country alpha2 being used: US
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.460000] ath: Regpair used: 0x3a
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.470000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.480000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Mon Jun 24 12:49:04 2019 kern.warn kernel: [   28.480000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.510000] ath: EEPROM regdomain: 0x0
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.510000] ath: EEPROM indicates default country code should be used
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.510000] ath: doing EEPROM country->regdmn map search
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.510000] ath: country maps to regdmn code: 0x3a
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.510000] ath: Country alpha2 being used: US
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.510000] ath: Regpair used: 0x3a
Mon Jun 24 12:49:04 2019 kern.debug kernel: [   28.520000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.530000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.540000] usbcore: registered new interface driver ath9k_htc
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.570000] RPC: Registered named UNIX socket transport module.
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.570000] RPC: Registered udp transport module.
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.580000] RPC: Registered tcp transport module.
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.580000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.610000] tun: Universal TUN/TAP device driver, 1.6
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.610000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.840000] usbcore: registered new interface driver rt2800usb
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.860000] usbcore: registered new interface driver rtl8187
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.890000] usbcore: registered new interface driver rtl8192cu
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.930000] usbcore: registered new interface driver cdc_acm
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.940000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.950000] usbcore: registered new interface driver cdc_wdm
Mon Jun 24 12:49:04 2019 kern.info kernel: [   28.960000] nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.040000] usbcore: registered new interface driver ums-alauda
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.070000] usbcore: registered new interface driver ums-cypress
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.080000] usbcore: registered new interface driver ums-datafab
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.090000] usbcore: registered new interface driver ums-freecom
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.100000] usbcore: registered new interface driver ums-isd200
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.110000] usbcore: registered new interface driver ums-jumpshot
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.120000] usbcore: registered new interface driver ums-karma
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.130000] usbcore: registered new interface driver ums-sddr09
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.130000] usbcore: registered new interface driver ums-sddr55
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.140000] usbcore: registered new interface driver ums-usbat
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.170000] usbcore: registered new interface driver usbserial
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.170000] usbcore: registered new interface driver usbserial_generic
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.180000] usbserial: USB Serial support registered for generic
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.250000] xt_time: kernel timezone is -0000
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.260000] usbcore: registered new interface driver asix
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.270000] usbcore: registered new interface driver ax88179_178a
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.280000] usbcore: registered new interface driver cdc_ether
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.290000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.300000] usbcore: registered new interface driver pl2303
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.310000] usbserial: USB Serial support registered for pl2303
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.320000] PPP generic driver version 2.4.2
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.330000] NET: Registered protocol family 24
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.340000] usbcore: registered new interface driver qmi_wwan
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.350000] usbcore: registered new interface driver rndis_host
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.360000] usbcore: registered new interface driver sierra_net
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.370000] usbcore: registered new interface driver option
Mon Jun 24 12:49:04 2019 kern.info kernel: [   29.380000] usbserial: USB Serial support registered for GSM modem (1-port)
Mon Jun 24 12:49:07 2019 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Mon Jun 24 12:49:08 2019 daemon.err block: /dev/ubi0_1 is already mounted
Mon Jun 24 12:49:12 2019 kern.info kernel: [   39.230000] device eth1 entered promiscuous mode
Mon Jun 24 12:49:12 2019 kern.info kernel: [   39.230000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 12:49:12 2019 kern.info kernel: [   39.240000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'lan' is enabled
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'lan' is setting up now
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'lan' is now up
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'loopback' is enabled
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'loopback' is now up
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'wan' is enabled
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'wan6' is enabled
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Bridge 'br-lan' link is up
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Network device 'lo' link is up
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Bridge 'br-lan' link is down
Mon Jun 24 12:49:12 2019 daemon.notice netifd: Interface 'lan' has link connectivity loss
Mon Jun 24 12:49:12 2019 kern.info kernel: [   39.480000] br-lan: port 1(eth1) entered disabled state
Mon Jun 24 12:49:12 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Jun 24 12:49:14 2019 kern.info kernel: [   41.520000] eth1: link up (100Mbps/Full duplex)
Mon Jun 24 12:49:14 2019 kern.info kernel: [   41.520000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 12:49:14 2019 kern.info kernel: [   41.530000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 12:49:14 2019 daemon.notice netifd: Bridge 'br-lan' link is up
Mon Jun 24 12:49:14 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Jun 24 12:49:14 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Jun 24 12:49:14 2019 daemon.notice netifd: radio1 (1240): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Mon Jun 24 12:49:16 2019 kern.info kernel: [   43.530000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 12:49:17 2019 kern.info kernel: [   44.260000] device wlan0 entered promiscuous mode
Mon Jun 24 12:49:17 2019 kern.info kernel: [   44.300000] br-lan: port 2(wlan0) entered forwarding state
Mon Jun 24 12:49:17 2019 kern.info kernel: [   44.310000] br-lan: port 2(wlan0) entered forwarding state
Mon Jun 24 12:49:17 2019 daemon.notice netifd: radio0 (1239): Configuration file: /var/run/hostapd-phy0.conf
Mon Jun 24 12:49:17 2019 daemon.notice netifd: radio0 (1239): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Jun 24 12:49:17 2019 daemon.notice netifd: radio0 (1239): Using interface wlan0 with hwaddr 00:13:37:a6:c3:0f and ssid "free_wifi"
Mon Jun 24 12:49:17 2019 daemon.notice netifd: radio0 (1239): wlan0: interface state COUNTRY_UPDATE->ENABLED
Mon Jun 24 12:49:17 2019 daemon.notice netifd: radio0 (1239): wlan0: AP-ENABLED
Mon Jun 24 12:49:19 2019 kern.info kernel: [   46.310000] br-lan: port 2(wlan0) entered forwarding state
Mon Jun 24 12:49:19 2019 daemon.notice netifd: radio0 (1239): OK
Mon Jun 24 12:49:19 2019 daemon.notice netifd: radio0 (1239): OK
Mon Jun 24 12:49:19 2019 daemon.notice netifd: radio0 (1239): OK
Mon Jun 24 12:49:19 2019 daemon.notice netifd: radio0 (1239): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Mon Jun 24 12:49:19 2019 daemon.notice netifd: radio0 (1239): OK
Mon Jun 24 12:49:19 2019 daemon.notice netifd: radio0 (1239): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Mon Jun 24 12:49:20 2019 daemon.notice netifd: Network device 'wlan0' link is up
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: started, version 2.78 cachesize 150
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: DNS service limited to local subnets
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq-dhcp[1520]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: using local addresses only for domain lan
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: using nameserver 8.8.8.8#53
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: reading /tmp/resolv.conf.auto
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: using local addresses only for domain lan
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: using nameserver 8.8.8.8#53
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: using nameserver 8.8.4.4#53
Mon Jun 24 12:49:20 2019 daemon.info dnsmasq[1520]: read /tmp/hosts/dhcp - 0 addresses
Mon Jun 24 12:49:21 2019 auth.info sshd[1535]: Server listening on 0.0.0.0 port 22.
Mon Jun 24 12:49:21 2019 user.emerg syslog: setting up led ETH0
Mon Jun 24 12:49:21 2019 user.emerg syslog: setting up led WLAN0
Mon Jun 24 12:49:21 2019 user.emerg syslog: setting up led WLAN1MON
Mon Jun 24 12:49:21 2019 daemon.info dnsmasq[1520]: read /pineapple/modules/DNSMasqSpoof/hosts/dnsmasq.hosts - 1 addresses
Mon Jun 24 12:49:21 2019 daemon.info dnsmasq-dhcp[1520]: read /etc/ethers - 0 addresses
Mon Jun 24 12:49:23 2019 user.emerg syslog: [!! 24-06-2019 12:49:23] [INTERFACE] Failed to create capture handle for wlan1mon: wlan1mon: No such device exists (SIOCGIFHWADDR: No such device)
Mon Jun 24 12:49:23 2019 user.notice root: =========== PineAP booted ==============
Mon Jun 24 12:49:23 2019 daemon.info procd: - init complete -
Mon Jun 24 12:49:25 2019 daemon.info dnsmasq-dhcp[1520]: DHCPDISCOVER(br-lan) 00:13:37:a6:c3:12
Mon Jun 24 12:49:25 2019 daemon.info dnsmasq-dhcp[1520]: DHCPOFFER(br-lan) 172.16.42.199 00:13:37:a6:c3:12
Mon Jun 24 12:49:26 2019 daemon.info dnsmasq-dhcp[1520]: DHCPREQUEST(br-lan) 172.16.42.199 00:13:37:a6:c3:12
Mon Jun 24 12:49:26 2019 daemon.info dnsmasq-dhcp[1520]: DHCPACK(br-lan) 172.16.42.199 00:13:37:a6:c3:12 Petes-MBP
Mon Jun 24 13:18:36 2019 daemon.notice netifd: Network device 'eth1' link is down
Mon Jun 24 13:18:36 2019 kern.info kernel: [ 1804.120000] eth1: link down
Mon Jun 24 13:18:36 2019 kern.info kernel: [ 1804.120000] br-lan: port 1(eth1) entered disabled state
Mon Jun 24 13:19:00 2019 kern.info kernel: [ 1828.120000] eth1: link up (100Mbps/Full duplex)
Mon Jun 24 13:19:00 2019 kern.info kernel: [ 1828.120000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:19:00 2019 kern.info kernel: [ 1828.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:19:00 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Jun 24 13:19:02 2019 kern.info kernel: [ 1830.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:19:20 2019 daemon.notice netifd: Network device 'eth1' link is down
Mon Jun 24 13:19:20 2019 kern.info kernel: [ 1848.120000] eth1: link down
Mon Jun 24 13:19:20 2019 kern.info kernel: [ 1848.120000] br-lan: port 1(eth1) entered disabled state
Mon Jun 24 13:19:22 2019 kern.info kernel: [ 1850.120000] eth1: link up (100Mbps/Full duplex)
Mon Jun 24 13:19:22 2019 kern.info kernel: [ 1850.120000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:19:22 2019 kern.info kernel: [ 1850.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:19:22 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Jun 24 13:19:24 2019 kern.info kernel: [ 1852.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:53:40 2019 daemon.notice netifd: Network device 'eth1' link is down
Mon Jun 24 13:53:40 2019 kern.info kernel: [ 3908.120000] eth1: link down
Mon Jun 24 13:53:40 2019 kern.info kernel: [ 3908.120000] br-lan: port 1(eth1) entered disabled state
Mon Jun 24 13:53:42 2019 kern.info kernel: [ 3910.120000] eth1: link up (100Mbps/Full duplex)
Mon Jun 24 13:53:42 2019 kern.info kernel: [ 3910.120000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:53:42 2019 kern.info kernel: [ 3910.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:53:42 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Jun 24 13:53:43 2019 daemon.info dnsmasq-dhcp[1520]: DHCPDISCOVER(br-lan) 172.16.42.199 00:13:37:a6:c3:12
Mon Jun 24 13:53:43 2019 daemon.info dnsmasq-dhcp[1520]: DHCPOFFER(br-lan) 172.16.42.199 00:13:37:a6:c3:12
Mon Jun 24 13:53:43 2019 daemon.info dnsmasq-dhcp[1520]: DHCPREQUEST(br-lan) 172.16.42.199 00:13:37:a6:c3:12
Mon Jun 24 13:53:43 2019 daemon.info dnsmasq-dhcp[1520]: DHCPACK(br-lan) 172.16.42.199 00:13:37:a6:c3:12 kali
Mon Jun 24 13:53:44 2019 kern.info kernel: [ 3912.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:57:28 2019 daemon.info dnsmasq-dhcp[1520]: DHCPREQUEST(br-lan) 172.16.42.199 00:13:37:a6:c3:12
Mon Jun 24 13:57:28 2019 daemon.info dnsmasq-dhcp[1520]: DHCPACK(br-lan) 172.16.42.199 00:13:37:a6:c3:12 kali
Mon Jun 24 13:58:50 2019 daemon.notice netifd: Network device 'eth1' link is down
Mon Jun 24 13:58:50 2019 kern.info kernel: [ 4218.120000] eth1: link down
Mon Jun 24 13:58:50 2019 kern.info kernel: [ 4218.120000] br-lan: port 1(eth1) entered disabled state
Mon Jun 24 13:58:51 2019 kern.info kernel: [ 4219.120000] eth1: link up (100Mbps/Full duplex)
Mon Jun 24 13:58:51 2019 kern.info kernel: [ 4219.120000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:58:51 2019 kern.info kernel: [ 4219.130000] br-lan: port 1(eth1) entered forwarding state
Mon Jun 24 13:58:51 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Jun 24 13:58:53 2019 kern.info kernel: [ 4221.130000] br-lan: port 1(eth1) entered forwarding state
===== WIRELESS CONFIG======

config wifi-device 'radio0'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'platform/ar934x_wmac'
    option htmode 'HT20'
    option country 'US'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option maxassoc '100'
    option encryption 'none'
    option ssid 'free_wifi'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option encryption 'psk2+ccmp'
    option disabled '1'
    option ssid 'pineapple_management'
    option key 'TPsr35kg!!'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'PineAP_Enterprise'
    option macaddr '00:11:22:33:44:55'
    option encryption 'wpa2+ccmp'
    option key '12345678'
    option server '127.0.0.1'
    option disabled '1'

config wifi-device 'radio1'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'pci0000:00/0000:00:00.0'
    option htmode 'HT20'
    option country 'US'

config wifi-iface
    option device 'radio1'
    option ifname 'wlan1'
    option network 'lan'
    option mode 'sta'
    option ssid 'Pineapple_C310'
    option encryption 'none'

============SURVEY=========
OK
[
    {
        "aps": {
            "B0:B9:8A:B5:15:C7": {
                "ssid": "Verizon-791L-15C7",
                "encryption": "WPA2 PSK (CCMP)",
                "hidden": 0,
                "channel": 1,
                "signal": -77,
                "wps": 1,
                "last_seen": 1561466278,
                "clients": []
            },
            "B2:B9:8A:B5:15:C7": {
                "ssid": "Verizon-791L-15C7",
                "encryption": "WPA2 PSK (CCMP)",
                "hidden": 0,
                "channel": 36,
                "signal": -55,
                "wps": 1,
                "last_seen": 1561466286,
                "clients": {
                    "8C:85:90:AD:98:A7": {
                        "bssid": "B2:B9:8A:B5:15:C7",
                        "last_seen": 1561466285
                    }
                }
            },
            "00:13:37:A6:C3:0F": {
                "ssid": "free_wifi",
                "encryption": "Open",
                "hidden": 0,
                "channel": 11,
                "signal": -25,
                "wps": 0,
                "last_seen": 1561466284,
                "clients": []
            }
        },
        "outOfRangeClients": [],
        "unassociatedClients": [
            "CE:79:79:93:AA:A0",
            "9C:8D:7C:84:2C:48",
            "46:37:0E:D4:B6:7E",
            "C0:17:4D:9B:A9:A9"
        ]
    }
]

 

 

Thanks,

 

Pete

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...
On 4/26/2019 at 2:13 PM, Foxtrot said:

It is working, you'll just see more stuff when you run a Recon scan because you'll be channel hopping.

Foxtrot,

This is straight forward advice, so I cannot understand why people are suggesting that Hak5 are not responding to questions🧐. Hak5 can only answer the questions posed, and it can be a trial by error as some people interpret the answers in different ways. It is a communication problem, but Hak5 do answer the questions posed and are really good at putting forward the best solutions. Hak5 also provide great videos and also a University channel, so, the 'truth is out there'. Needless to say that I am a Hak5 fan and love the gadgets, just wish there were more gadgets to play with🤓

Please keep up the excellent support and good work.

Cheers 😎

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...