Jump to content
Foxtrot

[RELEASE] WiFi Pineapple Firmware v2.5.x

Recommended Posts

17 hours ago, Jack Van Deusen said:

I bought the WiFi pineapple nano tactical, and the book. I read the book and watched dozens of videos on how to configure and operate my device, all to no avail. There were so many things that didn't work as you said it would. You left out so many details when writing the book, I still can't do anything with my Nano. I feel like I wasted $150 and countless hours of my time for absolutely nothing. Reading your forums and blogs confirm this, so many of your customers have asked you so many times to explain how to properly configure and operate the device but you don't respond, or when you do you don't answer their questions in detail. Many people out there are stuck with Nano's that are totally useless. I live in San Francisco and I would like to come to your office and collaborate with you in person so we can finally configure my Nano, and get it up an running properly once and for all..

Hi, 

This isn't really the topic for this, but nonetheless, I apologise if you're not happy with your device. The book covers the fundamentals of operating the WiFi Pineapple and explains the attacks used as a Rogue AP. You can also find detailed help on each aspect of the Pineapple (read: the modules) via the Help module in the Web UI. If you have more questions that the help text doesn't answer, please feel free to make a new topic on the forums as this one is solely for new firmware releases.

Thanks

  • Like 2

Share this post


Link to post
Share on other sites

I've just updated to the latest firmware from the website today.  I can connect to the spoofed wifi as seen in the dashboard and kick back off etc. I have the PineAP running and the Evil Portal running.  I dont get trapped into a portal and on the very rare occasion I do, I get a not authorized message after giving some credentials to the login page.  It seems there is a great great deal of weirdness going on.   I also followed the Windows 10 ICS video and have conformed that my ICS is correct.

I've tried also, to tether my laptop to my android phone and then to get a tablet to connect to the 'Starbucks free Wifi'

Any help appreciated. It seems like many people are suffering variations on a this theme.   I also suspect a bug in the formware in that sometimes I can not stop the portal?  I can stop PineAP? 

Share this post


Link to post
Share on other sites

While looking at this, I saw on GitHub others who were seeing not authorised errors. However, my system seemed to have EvilPortal 3.1. I noticed there was a get from pineapple.com a version 3.2, So I went for this but noticed the info in the portal showed 3.1 still!!  Manage modules showing 3.1 but info for the modiule showing 3.1.  I removed and installed. Same. So, what is the difference if any between v3.1 from github and 3.2 from pineapple.com and does either fix the now authorized error? 

Thanks in anticipation. I've tried this with and without the dns set to 127.0.0.1 for the various portal checks like clients3... etc. 

Share this post


Link to post
Share on other sites
1 hour ago, tommyq said:

While looking at this, I saw on GitHub others who were seeing not authorised errors. However, my system seemed to have EvilPortal 3.1. I noticed there was a get from pineapple.com a version 3.2, So I went for this but noticed the info in the portal showed 3.1 still!!  Manage modules showing 3.1 but info for the modiule showing 3.1.  I removed and installed. Same. So, what is the difference if any between v3.1 from github and 3.2 from pineapple.com and does either fix the now authorized error? 

Thanks in anticipation. I've tried this with and without the dns set to 127.0.0.1 for the various portal checks like clients3... etc. 

the not authorized is not an error it is part of the redirect.  It needs to be change in your portal to redirect to a website 

Share this post


Link to post
Share on other sites

Ah.  Thank you very much!!   I've been pulling my hair (whats left of it) out.

Share this post


Link to post
Share on other sites

Latest firmware pineap no longer works for my nano no more blue led on the nano only flashes during boot as normal.

Share this post


Link to post
Share on other sites

can email debug log will not post has some private info.  please advise where to send email too.

 

Share this post


Link to post
Share on other sites

Latest firmware pineap no longer works for my nano no more blue led on the nano only flashes during boot as normal. I cleaned up the debug obfuscated the private stuff ....

============CPUINFO========
system type        : Atheros AR9330 rev 1
machine            : WiFi Pineapple NANO
processor        : 0
cpu model        : MIPS 24Kc V7.4
BogoMIPS        : 265.42
wait instruction    : yes
microsecond timers    : yes
tlb_entries        : 16
extra interrupt vector    : yes
hardware watchpoint    : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa            : mips1 mips2 mips32r1 mips32r2
ASEs implemented    : mips16
shadow register sets    : 1
kscratch registers    : 0
package            : 0
core            : 0
VCED exceptions        : not available
VCEI exceptions        : not available

Firmware Version: 2.5.4
=============LSUSB=========
Bus 001 Device 005: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 004: ID 05e3:0745 Genesys Logic, Inc. 
Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==============DF===========
Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.3M    372.0K      1.9M  16% /
/dev/root                12.5M     12.5M         0 100% /rom
tmpfs                    29.8M    144.0K     29.7M   0% /tmp
/dev/mtdblock3            2.3M    372.0K      1.9M  16% /overlay
overlayfs:/overlay        2.3M    372.0K      1.9M  16% /
tmpfs                   512.0K         0    512.0K   0% /dev
==============IW===========
phy#2
    Interface wlan2
        ifindex 9
        wdev 0x200000002
        addr $$$$$$$$$$$$$
        type managed
        channel 9 (2452 MHz), width: 40 MHz, center1: 2442 MHz
        txpower 30.00 dBm
phy#1
    Interface wlan1
        ifindex 6
        wdev 0x100000002
        addr 00:c0:ca:a5:c7:14
        type managed
        txpower 20.00 dBm
===========IFCONFIG========
br-lan    Link encap:Ethernet  HWaddr 00:C0:CA:A5:D1:FE  
          inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1107 errors:0 dropped:187 overruns:0 frame:0
          TX packets:1018 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:137998 (134.7 KiB)  TX bytes:1106918 (1.0 MiB)

eth0      Link encap:Ethernet  HWaddr 00:C0:CA:A5:D1:FE  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1122 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1020 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:155644 (151.9 KiB)  TX bytes:1107010 (1.0 MiB)
          Interrupt:4 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:31 errors:0 dropped:0 overruns:0 frame:0
          TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:2806 (2.7 KiB)  TX bytes:2806 (2.7 KiB)

wlan1     Link encap:Ethernet  HWaddr 00:C0:CA:A5:C7:14  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan2     Link encap:Ethernet  HWaddr 00:0F:00:71:32:10  
          inet addr:$$$$$$$$$  Bcast:$$$$$$$$$  Mask:$$$$$$$$$
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:58 errors:0 dropped:10 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:7176 (7.0 KiB)  TX bytes:4116 (4.0 KiB)

===========IWCONFIG========
lo        no wireless extensions.

eth0      no wireless extensions.

br-lan    no wireless extensions.

wlan2     IEEE 802.11bgn  ESSID:"Rebel_Alliance"  
          Mode:Managed  Frequency:2.452 GHz  Access Point: $$$$$$$$$   
          Bit Rate=108 Mb/s   Tx-Power=30 dBm   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70  Signal level=-39 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

wlan1     IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          
============DMESG==========
[    0.000000] Linux version 3.18.84 (@774559a83ad4) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #42 Thu Apr 25 20:27:12 UTC 2019
[    0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=PINEAPPLE-NANO  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is WiFi Pineapple NANO
[    0.380000] Switched to clocksource MIPS
[    0.380000] NET: Registered protocol family 2
[    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.400000] TCP: reno registered
[    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.420000] NET: Registered protocol family 1
[    0.420000] PCI: CLS 0 bytes, default 32
[    0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.450000] msgmni has been set to 118
[    0.460000] io scheduler noop registered
[    0.460000] io scheduler deadline registered (default)
[    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.480000] console [ttyATH0] enabled
[    0.490000] bootconsole [early0] disabled
[    0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[    0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.520000] 5 tp-link partitions found on MTD device spi0.0
[    0.520000] Creating 5 MTD partitions on "spi0.0":
[    0.520000] 0x000000000000-0x000000020000 : "u-boot"
[    0.530000] 0x000000020000-0x00000013ad28 : "kernel"
[    0.540000] 0x00000013ad28-0x000000ff0000 : "rootfs"
[    0.540000] mtd: device 2 (rootfs) set to be root filesystem
[    0.540000] 1 squashfs-split partitions found on MTD device rootfs
[    0.550000] 0x000000da0000-0x000000ff0000 : "rootfs_data"
[    0.560000] 0x000000ff0000-0x000001000000 : "art"
[    0.560000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.200000] TCP: cubic registered
[    1.200000] NET: Registered protocol family 17
[    1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.220000] 8021q: 802.1Q VLAN Support v1.8
[    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.240000] Freeing unused kernel memory: 240K
[    2.780000] init: Console is alive
[    2.780000] init: - watchdog -
[    5.440000] usbcore: registered new interface driver usbfs
[    5.440000] usbcore: registered new interface driver hub
[    5.450000] usbcore: registered new device driver usb
[    5.510000] SCSI subsystem initialized
[    5.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.520000] ehci-platform: EHCI generic platform driver
[    5.530000] ehci-platform ehci-platform: EHCI Host Controller
[    5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.570000] hub 1-0:1.0: USB hub found
[    5.570000] hub 1-0:1.0: 1 port detected
[    5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.590000] ohci-platform: OHCI generic platform driver
[    5.590000] uhci_hcd: USB Universal Host Controller Interface driver
[    5.610000] usbcore: registered new interface driver usb-storage
[    5.900000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    5.990000] init: - preinit -
[    6.110000] hub 1-1:1.0: USB hub found
[    6.110000] hub 1-1:1.0: 4 ports detected
[    6.620000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    6.850000] random: procd urandom read with 12 bits of entropy available
[    6.990000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[    7.020000] mount_root: loading kmods from internal overlay
[    7.210000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    7.220000] scsi host0: usb-storage 1-1.2:1.0
[    7.370000] jffs2: notice: (329) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.380000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    7.400000] block: extroot: not configured
[    7.440000] jffs2: notice: (326) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.570000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    7.580000] block: extroot: not configured
[    7.580000] mount_root: switching to jffs2 overlay
[    7.650000] procd: - early -
[    7.650000] procd: - watchdog -
[    8.350000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
[    8.360000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    8.870000] procd: - ubus -
[    9.880000] procd: - init -
[   13.530000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   13.540000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   13.700000] ath: EEPROM regdomain: 0x0
[   13.700000] ath: EEPROM indicates default country code should be used
[   13.700000] ath: doing EEPROM country->regdmn map search
[   13.700000] ath: country maps to regdmn code: 0x3a
[   13.700000] ath: Country alpha2 being used: US
[   13.700000] ath: Regpair used: 0x3a
[   13.710000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.720000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   13.730000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   13.740000] usbcore: registered new interface driver ath9k_htc
[   14.030000] RPC: Registered named UNIX socket transport module.
[   14.030000] RPC: Registered udp transport module.
[   14.030000] RPC: Registered tcp transport module.
[   14.040000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.090000] tun: Universal TUN/TAP device driver, 1.6
[   14.090000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   14.180000] usbcore: registered new interface driver rt2800usb
[   14.190000] usbcore: registered new interface driver rtl8187
[   14.220000] usbcore: registered new interface driver rtl8192cu
[   14.250000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.270000] usbcore: registered new interface driver cdc_acm
[   14.270000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.280000] usbcore: registered new interface driver cdc_wdm
[   14.300000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[   14.340000] usbcore: registered new interface driver ums-alauda
[   14.350000] usbcore: registered new interface driver ums-cypress
[   14.350000] usbcore: registered new interface driver ums-datafab
[   14.360000] usbcore: registered new interface driver ums-freecom
[   14.370000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   14.380000] usbcore: registered new interface driver ums-isd200
[   14.390000] usbcore: registered new interface driver ums-jumpshot
[   14.400000] usbcore: registered new interface driver ums-karma
[   14.400000] usbcore: registered new interface driver ums-sddr09
[   14.410000] usbcore: registered new interface driver ums-sddr55
[   14.420000] usbcore: registered new interface driver ums-usbat
[   14.440000] usbcore: registered new interface driver usbserial
[   14.450000] usbcore: registered new interface driver usbserial_generic
[   14.450000] usbserial: USB Serial support registered for generic
[   14.510000] xt_time: kernel timezone is -0000
[   14.520000] usbcore: registered new interface driver asix
[   14.520000] usbcore: registered new interface driver ax88179_178a
[   14.530000] usbcore: registered new interface driver cdc_ether
[   14.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.570000] usbcore: registered new interface driver pl2303
[   14.570000] usbserial: USB Serial support registered for pl2303
[   14.580000] PPP generic driver version 2.4.2
[   14.590000] NET: Registered protocol family 24
[   14.600000] usbcore: registered new interface driver qmi_wwan
[   14.610000] usbcore: registered new interface driver rndis_host
[   14.620000] usbcore: registered new interface driver sierra_net
[   14.630000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[   14.640000] usbcore: registered new interface driver option
[   14.640000] usbserial: USB Serial support registered for GSM modem (1-port)
[   14.890000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
[   14.900000] ath9k_htc 1-1.1:1.0: FW RMW support: On
[   14.900000] ath: EEPROM regdomain: 0x0
[   14.900000] ath: EEPROM indicates default country code should be used
[   14.900000] ath: doing EEPROM country->regdmn map search
[   14.900000] ath: country maps to regdmn code: 0x3a
[   14.900000] ath: Country alpha2 being used: US
[   14.900000] ath: Regpair used: 0x3a
[   14.910000] ieee80211 phy1: Atheros AR9271 Rev:1
[   23.740000] device eth0 entered promiscuous mode
[   26.220000] eth0: link up (100Mbps/Full duplex)
[   26.220000] br-lan: port 1(eth0) entered forwarding state
[   26.230000] br-lan: port 1(eth0) entered forwarding state
[   28.230000] br-lan: port 1(eth0) entered forwarding state
[   35.600000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform
[   35.820000] usb 1-1.3: reset high-speed USB device number 5 using ehci-platform
[   36.230000] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[   36.300000] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected
[   36.310000] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[   40.480000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   40.620000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   41.200000] random: nonblocking pool is initialized
[   47.530000] wlan2: authenticate with $$$$$$$$$
[   47.580000] wlan2: send auth to $$$$$$$$$ (try 1/3)
[   47.630000] wlan2: send auth to $$$$$$$$$ (try 2/3)
[   47.670000] wlan2: send auth to $$$$$$$$$ (try 3/3)
[   47.720000] wlan2: authentication with $$$$$$$$$ timed out
[   52.560000] wlan2: authenticate with $$$$$$$$$
[   52.610000] wlan2: send auth to $$$$$$$$$ (try 1/3)
[   52.620000] wlan2: authenticated
[   52.630000] wlan2: associate with $$$$$$$$$ (try 1/3)
[   52.680000] wlan2: RX AssocResp from $$$$$$$$$ (capab=0xc11 status=0 aid=1)
[   52.700000] wlan2: associated
============LOGREAD========
Tue May 14 14:33:23 2019 kern.info kernel: [    5.530000] ehci-platform ehci-platform: EHCI Host Controller
Tue May 14 14:33:23 2019 kern.info kernel: [    5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Tue May 14 14:33:23 2019 kern.info kernel: [    5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Tue May 14 14:33:23 2019 kern.info kernel: [    5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Tue May 14 14:33:23 2019 kern.info kernel: [    5.570000] hub 1-0:1.0: USB hub found
Tue May 14 14:33:23 2019 kern.info kernel: [    5.570000] hub 1-0:1.0: 1 port detected
Tue May 14 14:33:23 2019 kern.info kernel: [    5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Tue May 14 14:33:23 2019 kern.info kernel: [    5.590000] ohci-platform: OHCI generic platform driver
Tue May 14 14:33:23 2019 kern.info kernel: [    5.590000] uhci_hcd: USB Universal Host Controller Interface driver
Tue May 14 14:33:23 2019 kern.info kernel: [    5.610000] usbcore: registered new interface driver usb-storage
Tue May 14 14:33:23 2019 kern.info kernel: [    5.900000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Tue May 14 14:33:23 2019 user.info kernel: [    5.990000] init: - preinit -
Tue May 14 14:33:23 2019 kern.info kernel: [    6.110000] hub 1-1:1.0: USB hub found
Tue May 14 14:33:23 2019 kern.info kernel: [    6.110000] hub 1-1:1.0: 4 ports detected
Tue May 14 14:33:23 2019 kern.info kernel: [    6.620000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Tue May 14 14:33:23 2019 kern.notice kernel: [    6.850000] random: procd urandom read with 12 bits of entropy available
Tue May 14 14:33:23 2019 kern.info kernel: [    6.990000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
Tue May 14 14:33:23 2019 user.info kernel: [    7.020000] mount_root: loading kmods from internal overlay
Tue May 14 14:33:23 2019 kern.info kernel: [    7.210000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
Tue May 14 14:33:23 2019 kern.info kernel: [    7.220000] scsi host0: usb-storage 1-1.2:1.0
Tue May 14 14:33:23 2019 kern.notice kernel: [    7.370000] jffs2: notice: (329) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue May 14 14:33:23 2019 user.info kernel: [    7.380000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Tue May 14 14:33:23 2019 user.info kernel: [    7.400000] block: extroot: not configured
Tue May 14 14:33:23 2019 kern.notice kernel: [    7.440000] jffs2: notice: (326) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue May 14 14:33:23 2019 user.info kernel: [    7.570000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Tue May 14 14:33:23 2019 user.info kernel: [    7.580000] block: extroot: not configured
Tue May 14 14:33:23 2019 user.info kernel: [    7.580000] mount_root: switching to jffs2 overlay
Tue May 14 14:33:23 2019 user.info kernel: [    7.650000] procd: - early -
Tue May 14 14:33:23 2019 user.info kernel: [    7.650000] procd: - watchdog -
Tue May 14 14:33:23 2019 kern.notice kernel: [    8.350000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
Tue May 14 14:33:23 2019 kern.notice kernel: [    8.360000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Tue May 14 14:33:23 2019 user.info kernel: [    8.870000] procd: - ubus -
Tue May 14 14:33:23 2019 user.info kernel: [    9.880000] procd: - init -
Tue May 14 14:33:23 2019 kern.info kernel: [   13.530000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Tue May 14 14:33:23 2019 kern.info kernel: [   13.540000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.700000] ath: EEPROM regdomain: 0x0
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.700000] ath: EEPROM indicates default country code should be used
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.700000] ath: doing EEPROM country->regdmn map search
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.700000] ath: country maps to regdmn code: 0x3a
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.700000] ath: Country alpha2 being used: US
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.700000] ath: Regpair used: 0x3a
Tue May 14 14:33:23 2019 kern.debug kernel: [   13.710000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue May 14 14:33:23 2019 kern.info kernel: [   13.720000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Tue May 14 14:33:23 2019 kern.info kernel: [   13.730000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
Tue May 14 14:33:23 2019 kern.info kernel: [   13.740000] usbcore: registered new interface driver ath9k_htc
Tue May 14 14:33:23 2019 kern.info kernel: [   14.030000] RPC: Registered named UNIX socket transport module.
Tue May 14 14:33:23 2019 kern.info kernel: [   14.030000] RPC: Registered udp transport module.
Tue May 14 14:33:23 2019 kern.info kernel: [   14.030000] RPC: Registered tcp transport module.
Tue May 14 14:33:23 2019 kern.info kernel: [   14.040000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Tue May 14 14:33:23 2019 kern.info kernel: [   14.090000] tun: Universal TUN/TAP device driver, 1.6
Tue May 14 14:33:23 2019 kern.info kernel: [   14.090000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Tue May 14 14:33:23 2019 kern.info kernel: [   14.180000] usbcore: registered new interface driver rt2800usb
Tue May 14 14:33:23 2019 kern.info kernel: [   14.190000] usbcore: registered new interface driver rtl8187
Tue May 14 14:33:23 2019 kern.info kernel: [   14.220000] usbcore: registered new interface driver rtl8192cu
Tue May 14 14:33:23 2019 kern.notice kernel: [   14.250000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Tue May 14 14:33:23 2019 kern.info kernel: [   14.270000] usbcore: registered new interface driver cdc_acm
Tue May 14 14:33:23 2019 kern.info kernel: [   14.270000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Tue May 14 14:33:23 2019 kern.info kernel: [   14.280000] usbcore: registered new interface driver cdc_wdm
Tue May 14 14:33:23 2019 kern.info kernel: [   14.300000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
Tue May 14 14:33:23 2019 kern.info kernel: [   14.340000] usbcore: registered new interface driver ums-alauda
Tue May 14 14:33:23 2019 kern.info kernel: [   14.350000] usbcore: registered new interface driver ums-cypress
Tue May 14 14:33:23 2019 kern.info kernel: [   14.350000] usbcore: registered new interface driver ums-datafab
Tue May 14 14:33:23 2019 kern.info kernel: [   14.360000] usbcore: registered new interface driver ums-freecom
Tue May 14 14:33:23 2019 kern.info kernel: [   14.370000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
Tue May 14 14:33:23 2019 kern.info kernel: [   14.380000] usbcore: registered new interface driver ums-isd200
Tue May 14 14:33:23 2019 kern.info kernel: [   14.390000] usbcore: registered new interface driver ums-jumpshot
Tue May 14 14:33:23 2019 kern.info kernel: [   14.400000] usbcore: registered new interface driver ums-karma
Tue May 14 14:33:23 2019 kern.info kernel: [   14.400000] usbcore: registered new interface driver ums-sddr09
Tue May 14 14:33:23 2019 kern.info kernel: [   14.410000] usbcore: registered new interface driver ums-sddr55
Tue May 14 14:33:23 2019 kern.info kernel: [   14.420000] usbcore: registered new interface driver ums-usbat
Tue May 14 14:33:23 2019 kern.info kernel: [   14.440000] usbcore: registered new interface driver usbserial
Tue May 14 14:33:23 2019 kern.info kernel: [   14.450000] usbcore: registered new interface driver usbserial_generic
Tue May 14 14:33:23 2019 kern.info kernel: [   14.450000] usbserial: USB Serial support registered for generic
Tue May 14 14:33:23 2019 kern.info kernel: [   14.510000] xt_time: kernel timezone is -0000
Tue May 14 14:33:23 2019 kern.info kernel: [   14.520000] usbcore: registered new interface driver asix
Tue May 14 14:33:23 2019 kern.info kernel: [   14.520000] usbcore: registered new interface driver ax88179_178a
Tue May 14 14:33:23 2019 kern.info kernel: [   14.530000] usbcore: registered new interface driver cdc_ether
Tue May 14 14:33:23 2019 kern.info kernel: [   14.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue May 14 14:33:23 2019 kern.info kernel: [   14.570000] usbcore: registered new interface driver pl2303
Tue May 14 14:33:23 2019 kern.info kernel: [   14.570000] usbserial: USB Serial support registered for pl2303
Tue May 14 14:33:23 2019 kern.info kernel: [   14.580000] PPP generic driver version 2.4.2
Tue May 14 14:33:23 2019 kern.info kernel: [   14.590000] NET: Registered protocol family 24
Tue May 14 14:33:23 2019 kern.info kernel: [   14.600000] usbcore: registered new interface driver qmi_wwan
Tue May 14 14:33:23 2019 kern.info kernel: [   14.610000] usbcore: registered new interface driver rndis_host
Tue May 14 14:33:23 2019 kern.info kernel: [   14.620000] usbcore: registered new interface driver sierra_net
Tue May 14 14:33:23 2019 kern.info kernel: [   14.630000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
Tue May 14 14:33:23 2019 kern.info kernel: [   14.640000] usbcore: registered new interface driver option
Tue May 14 14:33:23 2019 kern.info kernel: [   14.640000] usbserial: USB Serial support registered for GSM modem (1-port)
Tue May 14 14:33:23 2019 kern.info kernel: [   14.890000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
Tue May 14 14:33:23 2019 kern.info kernel: [   14.900000] ath9k_htc 1-1.1:1.0: FW RMW support: On
Tue May 14 14:33:23 2019 kern.debug kernel: [   14.900000] ath: EEPROM regdomain: 0x0
Tue May 14 14:33:23 2019 kern.debug kernel: [   14.900000] ath: EEPROM indicates default country code should be used
Tue May 14 14:33:23 2019 kern.debug kernel: [   14.900000] ath: doing EEPROM country->regdmn map search
Tue May 14 14:33:23 2019 kern.debug kernel: [   14.900000] ath: country maps to regdmn code: 0x3a
Tue May 14 14:33:23 2019 kern.debug kernel: [   14.900000] ath: Country alpha2 being used: US
Tue May 14 14:33:23 2019 kern.debug kernel: [   14.900000] ath: Regpair used: 0x3a
Tue May 14 14:33:23 2019 kern.info kernel: [   14.910000] ieee80211 phy1: Atheros AR9271 Rev:1
Tue May 14 14:33:25 2019 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Tue May 14 14:33:25 2019 daemon.err block: /dev/mtdblock3 is already mounted
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'lan' is enabled
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'lan' is setting up now
Tue May 14 14:33:29 2019 kern.info kernel: [   23.740000] device eth0 entered promiscuous mode
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'lan' is now up
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'loopback' is enabled
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'loopback' is now up
Tue May 14 14:33:29 2019 daemon.notice netifd: Network device 'lo' link is up
Tue May 14 14:33:29 2019 daemon.notice netifd: Interface 'loopback' has link connectivity 
Tue May 14 14:33:30 2019 daemon.notice netifd: radio2 (1406): Could not find PHY for device 'radio2'
Tue May 14 14:33:30 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue May 14 14:33:30 2019 daemon.notice netifd: radio2 (1443): WARNING: Variable 'data' does not exist or is not an array/object
Tue May 14 14:33:31 2019 kern.info kernel: [   26.220000] eth0: link up (100Mbps/Full duplex)
Tue May 14 14:33:31 2019 kern.info kernel: [   26.220000] br-lan: port 1(eth0) entered forwarding state
Tue May 14 14:33:31 2019 kern.info kernel: [   26.230000] br-lan: port 1(eth0) entered forwarding state
Tue May 14 14:33:31 2019 daemon.notice netifd: Network device 'eth0' link is up
Tue May 14 14:33:31 2019 daemon.notice netifd: Bridge 'br-lan' link is up
Tue May 14 14:33:31 2019 daemon.notice netifd: Interface 'lan' has link connectivity 
Tue May 14 14:33:32 2019 daemon.notice netifd: radio1 (1405): ifconfig: invalid hw-addr 0
Tue May 14 14:33:33 2019 daemon.notice netifd: radio1 (1405): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Tue May 14 14:33:33 2019 kern.info kernel: [   28.230000] br-lan: port 1(eth0) entered forwarding state
Tue May 14 14:33:35 2019 daemon.notice netifd: radio0 (1404): Configuration file: /var/run/hostapd-phy0.conf
Tue May 14 14:33:35 2019 daemon.notice netifd: radio0 (1404): Line 28: invalid bssid item
Tue May 14 14:33:35 2019 daemon.notice netifd: radio0 (1404): 1 errors found in configuration file '/var/run/hostapd-phy0.conf'
Tue May 14 14:33:35 2019 daemon.notice netifd: radio0 (1404): Failed to set up interface with /var/run/hostapd-phy0.conf
Tue May 14 14:33:35 2019 daemon.notice netifd: radio0 (1404): Failed to initialize interface
Tue May 14 14:33:36 2019 daemon.notice netifd: radio0 (1404): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Tue May 14 14:33:36 2019 daemon.notice netifd: radio0 (1404): Command failed: Invalid argument
Tue May 14 14:33:36 2019 daemon.notice netifd: radio0 (1404): Device setup failed: HOSTAPD_START_FAILED
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: started, version 2.78 cachesize 150
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: DNS service limited to local subnets
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Tue May 14 14:33:38 2019 daemon.info dnsmasq-dhcp[1674]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: using local addresses only for domain lan
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: reading /tmp/resolv.conf.auto
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: using local addresses only for domain lan
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: using nameserver 8.8.4.4#53
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: read /etc/hosts - 1 addresses
Tue May 14 14:33:38 2019 daemon.info dnsmasq[1674]: read /tmp/hosts/dhcp - 1 addresses
Tue May 14 14:33:38 2019 daemon.info dnsmasq-dhcp[1674]: read /etc/ethers - 0 addresses
Tue May 14 14:33:40 2019 daemon.info dnsmasq-dhcp[1674]: DHCPREQUEST(br-lan) 172.16.42.122 00:c0:ca:a5:db:e8 
Tue May 14 14:33:40 2019 daemon.info dnsmasq-dhcp[1674]: DHCPACK(br-lan) 172.16.42.122 00:c0:ca:a5:db:e8 The_Gibson
Tue May 14 14:33:40 2019 user.emerg syslog: setting up led WLAN
Tue May 14 14:33:41 2019 auth.info sshd[1703]: Server listening on 0.0.0.0 port 22.
Tue May 14 14:33:41 2019 kern.info kernel: [   35.600000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform
Tue May 14 14:33:41 2019 kern.info kernel: [   35.820000] usb 1-1.3: reset high-speed USB device number 5 using ehci-platform
Tue May 14 14:33:41 2019 kern.info kernel: [   36.230000] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
Tue May 14 14:33:41 2019 kern.info kernel: [   36.300000] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected
Tue May 14 14:33:41 2019 kern.debug kernel: [   36.310000] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
Tue May 14 14:33:45 2019 user.emerg syslog: [!! 14-05-2019 14:33:45] [INTERFACE] Failed to create capture handle for wlan1mon: wlan1mon: No such device exists (SIOCGIFHWADDR: No such device)
Tue May 14 14:33:45 2019 user.emerg syslog: ifconfig: wlan0: error fetching interface information: Device not found
Tue May 14 14:33:45 2019 daemon.notice netifd: radio2 (1923): command failed: Operation not supported (-122)
Tue May 14 14:33:46 2019 kern.info kernel: [   40.480000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
Tue May 14 14:33:46 2019 kern.info kernel: [   40.620000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
Tue May 14 14:33:46 2019 daemon.notice netifd: radio2 (1923): Successfully initialized wpa_supplicant
Tue May 14 14:33:46 2019 kern.notice kernel: [   41.200000] random: nonblocking pool is initialized
Tue May 14 14:33:48 2019 daemon.notice netifd: Interface 'wwan' is enabled
Tue May 14 14:33:53 2019 kern.info kernel: [   47.530000] wlan2: authenticate with $$$$$$$$$
Tue May 14 14:33:53 2019 kern.info kernel: [   47.580000] wlan2: send auth to $$$$$$$$$ (try 1/3)
Tue May 14 14:33:53 2019 kern.info kernel: [   47.630000] wlan2: send auth to $$$$$$$$$ (try 2/3)
Tue May 14 14:33:53 2019 kern.info kernel: [   47.670000] wlan2: send auth to $$$$$$$$$$ (try 3/3)
Tue May 14 14:33:53 2019 kern.info kernel: [   47.720000] wlan2: authentication with $$$$$$$$$ timed out
Tue May 14 14:33:58 2019 kern.info kernel: [   52.560000] wlan2: authenticate with $$$$$$$$$
Tue May 14 14:33:58 2019 kern.info kernel: [   52.610000] wlan2: send auth to $$$$$$$$$ (try 1/3)
Tue May 14 14:33:58 2019 kern.info kernel: [   52.620000] wlan2: authenticated
Tue May 14 14:33:58 2019 kern.info kernel: [   52.630000] wlan2: associate with $$$$$$$$$ (try 1/3)
Tue May 14 14:33:58 2019 kern.info kernel: [   52.680000] wlan2: RX AssocResp from $$$$$$$$$ (capab=0xc11 status=0 aid=1)
Tue May 14 14:33:58 2019 daemon.notice netifd: Network device 'wlan2' link is up
Tue May 14 14:33:58 2019 daemon.notice netifd: Interface 'wwan' has link connectivity 
Tue May 14 14:33:58 2019 daemon.notice netifd: Interface 'wwan' is setting up now
Tue May 14 14:33:58 2019 kern.info kernel: [   52.700000] wlan2: associated
Tue May 14 14:33:58 2019 daemon.notice netifd: wwan (2129): udhcpc (v1.23.2) started
Tue May 14 14:55:39 2019 daemon.notice netifd: wwan (2129): Sending discover...
Tue May 14 14:55:42 2019 daemon.notice netifd: wwan (2129): Sending discover...
Tue May 14 14:55:45 2019 daemon.notice netifd: wwan (2129): Sending discover...
Tue May 14 14:55:51 2019 daemon.notice netifd: wwan (2129): Sending select for $$$$$$$$$...
Tue May 14 14:55:51 2019 daemon.notice netifd: wwan (2129): Lease of $$$$$$$$$$$ obtained, lease time 43200
Tue May 14 14:55:51 2019 daemon.notice netifd: Interface 'wwan' is now up
Tue May 14 14:55:51 2019 daemon.info dnsmasq[1674]: reading /tmp/resolv.conf.auto
Tue May 14 14:55:51 2019 daemon.info dnsmasq[1674]: using local addresses only for domain lan
Tue May 14 14:55:51 2019 daemon.info dnsmasq[1674]: using nameserver $$$$$$$#53
Tue May 14 14:55:51 2019 daemon.info dnsmasq[1674]: using nameserver $$$$$$$$#53
Tue May 14 14:55:51 2019 daemon.info dnsmasq[1674]: using nameserver $$$$$$$$#53
Tue May 14 14:55:51 2019 user.notice firewall: Reloading firewall due to ifup of wwan (wlan2)
===== WIRELESS CONFIG======

config wifi-device 'radio0'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'platform/ar933x_wmac'
    option htmode 'HT20'
    option country 'US'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option maxassoc '100'
    option encryption 'none'
    option ssid 'PennyGetYourOwnWiFi'
    option hidden '1'
    option macaddr '0'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option encryption 'psk2+ccmp'
    option ssid '$$$$$$$$'
    option key '$$$$$$$$$$$'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'PineAP_Enterprise'
    option macaddr '00:11:22:33:44:55'
    option encryption 'wpa2+ccmp'
    option key '12345678'
    option server '127.0.0.1'
    option disabled '1'

config wifi-device 'radio1'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'platform/ehci-platform/usb1/1-1/1-1.1/1-1.1:1.0'
    option htmode 'HT20'
    option country 'US'

config wifi-iface
    option device 'radio1'
    option ifname 'wlan1'
    option network 'lan'
    option mode 'sta'
    option ssid 'Pineapple_C714'
    option encryption 'none'
    option macaddr '0'

config wifi-device 'radio2'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'platform/ehci-platform/usb1/1-1/1-1.3/1-1.3:1.0'
    option htmode 'HT20'

config wifi-iface
    option device 'radio2'
    option ifname 'wlan2'
    option mode 'sta'
    option network 'wwan'
    option ssid 'Rebel_Alliance'
    option encryption 'psk-mixed+ccmp'
    option key '$$$$$$$$$$'

============SURVEY=========
ifconfig: wlan0: error fetching interface information: Device not found
Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Failed to connect to socket at path: /var/run/pineapd.sock: No such file or directory
Usage: /pineapple/modules/Help/files/dumpscan.php [scan id]

 

 

Share this post


Link to post
Share on other sites
1 hour ago, fl0wb33 said:

Latest firmware pineap no longer works for my nano no more blue led on the nano only flashes during boot as normal. I cleaned up the debug obfuscated the private stuff ....

No SD card inserted?

Share this post


Link to post
Share on other sites
1 hour ago, Just_a_User said:

No SD card inserted?

I have tried both with SD card and without..

Share this post


Link to post
Share on other sites
6 hours ago, fl0wb33 said:

I have tried both with SD card and without..

OK i just noticed there wasn't one present. It's best to not run the nano without an SD setup as swap and formatted correctly. You can use the web UI to do that for you.

Share this post


Link to post
Share on other sites

I have finally got it back working reformatted the SD card no change , Factory reset the nano 3 times in a row now it is working again... glad to have my nano working again.

Share this post


Link to post
Share on other sites
On 5/15/2019 at 3:49 PM, fl0wb33 said:

I have finally got it back working reformatted the SD card no change , Factory reset the nano 3 times in a row now it is working again... glad to have my nano working again.

I’ve noticed over the years that dropping the cache pages before & after an SD card format, as well as before & after the factory reset has helped me avoid quirky bugs.

Share this post


Link to post
Share on other sites

Well did update my nano this morning 2.5.4

i am using this  with Raspberry pi 3 b+ for a while now,since update

Kali ios freeze,raspberry ios won`t recognize the nano:(

i got to go back to 2.5.2 🙂

Share this post


Link to post
Share on other sites
On 4/2/2019 at 5:50 PM, Jason_Meredith said:

Just did this update, now RECON no workie... anyone else have this issue?

yeah had the same after the update, rolled back to a previous version then updated again and it worked. 

Share this post


Link to post
Share on other sites
15 hours ago, Katerinmar said:

Hello .. I just finished updating my nano and do not want to turn on now, the blue LED turns on and off

I'm sorry you're having issues with the NANO, can you include more information? Does the device enumerate on your computer? Can you access the UI at http://172.16.42.1:1471?

 

Share this post


Link to post
Share on other sites
16 hours ago, jess4140 said:

Well did update my nano this morning 2.5.4

i am using this  with Raspberry pi 3 b+ for a while now,since update

Kali ios freeze,raspberry ios won`t recognize the nano:(

i got to go back to 2.5.2 🙂

This honestly doesn't sound related to the firmware update as we didn't change anything that would stop the host from recognising the Pineapple. Are your Networking settings correct? Does the device show up as USB Ethernet device?

Share this post


Link to post
Share on other sites
1 hour ago, Foxtrot said:

This honestly doesn't sound related to the firmware update as we didn't change anything that would stop the host from recognising the Pineapple. Are your Networking settings correct? Does the device show up as USB Ethernet device?

yes it does show and connect,but it will last like 30 second and the network change between eth0 and wifi on and off non stop..

Other then that on the laptop it work just find ,not a problem there.

But since it took the update,it will not function correctly on the pi3 i have  anymore,was perfect prior that.That is why i tested with  different ios ,but still same.

Will have to test with a different board i guess,will let you know 

 

Share this post


Link to post
Share on other sites

It sounds like the issue you're experiencing is related to your OS's network manager, which can cause this issue (it's something that trips me up from time to time myself).

Either set an interface priority in your network manager, or disable the network manager and configure the interface directly using ip or ifconfig to see if the issue disappears.

Share this post


Link to post
Share on other sites

If I'm understanding (quite possibly not) and with it being a cyclic thing, it sounds like the sort of thing you get with an IP conflict, where the interface bounces.   If not related to this specific issue, may help somebody else coming down this route looking for solutions. 

Share this post


Link to post
Share on other sites

Well i am back to tell you what really happen and why it act the way it did..

It is always human factor,i never realized then i have a different power source on the PI3. (NOT ENOUGH POWER)

I am still having problem with the wp6.sh to make the connection and be on the net when you are on dashboard to see bulletin.

But it fix it self when you go on  page network on the gui to connect at wlan0 🙂

  • Like 1

Share this post


Link to post
Share on other sites

Ha.   Many thanks.  I've had problems with PIs and PSUs - even the official ones.  I think I've had some problems with power and the nano too.  Good luck!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...