Jump to content
Foxtrot

[RELEASE] WiFi Pineapple Firmware v2.5.x

Recommended Posts

Hi everyone,

We just released firmware version 2.5.x for the WiFi Pineapple, vastly improving the PineAP engine. Expect greater results on your next wireless engagement with this release.

Changelog 2.5.4:

  • Recon
    • Fixed an issue where scan times would be invalid in non-Chromium web browsers.

Changelog 2.5.3:

  • Clients
    • Fixed an issue where SSIDs would not populate.
  • Filters
    • Add detailed Filters information.
  • Setup
    • Choosing the Filter modes is now required upon Setup.
  • Recon
    • Fixed an issue where, in some cases, probes would not be shown in the Recon dialog.
    • Fixed an issue where some probes were not logged during a Recon scan.
    • Fixed an issue where, in some cases, handshakes would not be captured.
    • Fixed an issue where captured handshakes could not be downloaded if the capture had stopped.
    • Fixed an issue where, in some cases, captured handshakes would have invalid frame lengths.
    • Previous scan dates are now translated to the browsers local time.
    • Fixed a rare issue where Live Scan results would not populate in the Web UI.
  • PineAP
    • Fixed an issue where downloading captured handshakes would not work.

Changelog 2.5.2:

  • Recon
    • Fixed an issue where invalid results with BSSID 00:00:00:00:00:00 would be collected.
    • Fixed an issue where changing the band to scan would not update until PineAP was restarted.
    • Fixed a firewall issue preventing Live recon results to populate in the Web UI.

Changelog 2.5.1:

  • Misc
    • Fix an issue where "Unsupported Device" would incorrectly show.

Changelog 2.5.0:

  • Hak5 Cloud C2
    • Client Update
  • PineAP
    • Rewrite of PineAP, featuring a multitude of improvements and reliability fixes.
  • Recon
    • Improved reliability of scanning.
    • Add throbber for deauth button.
    • Automatically start scan after enabling PineAP.
    • Remove misleading information message when the user started their first scan.
    • Fixed a rare issue where multiple live Recon processes would start.
  • Misc
    • Reduce amount of Web UI HTTP requests.
    • Fix missing paths on the WiFi Pineapple NANO.

Download: Over the air via your WiFi Pineapples webinterface, or at https://downloads.hak5.org.

 - The Hak5 Development Team

  • Like 2
  • Upvote 1

Share this post


Link to post
Share on other sites
Posted (edited)

Why does it say "Unsupported Device" in the top left where it usually says Wifi Pineapple?

edit: also will not allow me to start pineap and do recons but red light is flashing and wlan1mon is up

@Foxtrot

Edited by b0N3z
  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, b0N3z said:

Why does it say "Unsupported Device" in the top left where it usually says Wifi Pineapple?

edit: also will not allow me to start pineap and do recons but red light is flashing and wlan1mon is up

@Foxtrot

That's odd - You should only see that message if you aren't running on a NANO or a TETRA - Could you attach your debug log (Help module -> Generate Debug File) to a reply here?

We just released 2.5.1 that should fix this issue. Sorry for the inconvenience! Let me know how it goes for you.

Thanks 

  • Like 1
  • Upvote 1

Share this post


Link to post
Share on other sites

Hi,

So, the Tetra arrived this morning and after the first time boot and upgrade it is now running 2.5.0.

A quick Recon on 2.4 GHz only (after starting PineAP) does not detect any APs. After Googling around, I found the tip to enable logging and reboot etc. but still no luck.

Is Recon still supported in 2.5.0?

Many thanks

BTW 

Share this post


Link to post
Share on other sites

My tetra has the same issue. After the upgrade to 2.5.0, there is no ability to pick up wireless signals. Also, since receiving my tetra only a couple of days ago, it has been randomly rebooting and, every so often, during a reboot, it boot loops.

Share this post


Link to post
Share on other sites

Hello again,

Whilst Recon doesn't return any results (perhaps this function doesn't do what I think it does), the Site Survey module runs and returns 34 APs after a quick scan, so at least we know that the TETRA is not dead on arrival :-)

Any advice on Recon under 2.5.0 gratefully received.

Thanks

BTW

Share this post


Link to post
Share on other sites

Here is the debug log

============CPUINFO========
system type        : Atheros AR9344 rev 3
machine            : WiFi Pineapple TETRA
processor        : 0
cpu model        : MIPS 74Kc V4.12
BogoMIPS        : 278.93
wait instruction    : yes
microsecond timers    : yes
tlb_entries        : 32
extra interrupt vector    : yes
hardware watchpoint    : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa            : mips1 mips2 mips32r1 mips32r2
ASEs implemented    : mips16 dsp dsp2
shadow register sets    : 1
kscratch registers    : 0
package            : 0
core            : 0
VCED exceptions        : not available
VCEI exceptions        : not available

Firmware Version: 2.5.0
=============LSUSB=========
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
==============DF===========
Filesystem                Size      Used Available Use% Mounted on
rootfs                    1.8G      1.9M      1.8G   0% /
/dev/root                12.5M     12.5M         0 100% /rom
tmpfs                    61.4M    512.0K     60.9M   1% /tmp
/dev/ubi0_1               1.8G      1.9M      1.8G   0% /overlay
overlayfs:/overlay        1.8G      1.9M      1.8G   0% /
tmpfs                   512.0K         0    512.0K   0% /dev
==============IW===========
phy#1
    Interface wlan1mon
        ifindex 12
        wdev 0x100000005
        addr 00:13:37:a7:37:64
        type monitor
        channel 10 (2457 MHz), width: 20 MHz (no HT), center1: 2457 MHz
        txpower 30.00 dBm
phy#0
    Interface wlan0-1
        ifindex 9
        wdev 0x3
        addr 02:13:37:a7:37:63
        ssid FruitSalsa
        type AP
        channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
        txpower 30.00 dBm
    Interface wlan0
        ifindex 8
        wdev 0x2
        addr 00:13:37:a7:37:63
        ssid Pineapple_3763
        type AP
        channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
        txpower 30.00 dBm
===========IFCONFIG========
br-lan    Link encap:Ethernet  HWaddr (edit)  
          inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1155 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1294 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:296801 (289.8 KiB)  TX bytes:841192 (821.4 KiB)

eth0      Link encap:Ethernet  HWaddr (edit)  
          inet addr:(edit)  Bcast:(edit)  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1651 errors:0 dropped:51 overruns:0 frame:0
          TX packets:520 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:645966 (630.8 KiB)  TX bytes:48949 (47.8 KiB)
          Interrupt:5

eth1      Link encap:Ethernet  HWaddr (edit)  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1155 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1304 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:312971 (305.6 KiB)  TX bytes:841652 (821.9 KiB)
          Interrupt:4

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:38 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3373 (3.2 KiB)  TX bytes:3373 (3.2 KiB)

wlan0     Link encap:Ethernet  HWaddr (edit)  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:576 (576.0 B)

wlan0-1   Link encap:Ethernet  HWaddr (edit)  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:640 (640.0 B)

wlan1mon  Link encap:UNSPEC  HWaddr (edit)  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:50175 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4550950 (4.3 MiB)  TX bytes:0 (0.0 B)

===========IWCONFIG========
lo        no wireless extensions.

eth1      no wireless extensions.

eth0      no wireless extensions.

br-lan    no wireless extensions.

wlan0-1   IEEE 802.11abgn  Mode:Master  Tx-Power=30 dBm   
          RTS thr:off   Fragment thr:off
          Power Management:off
          
wlan0     IEEE 802.11abgn  Mode:Master  Tx-Power=30 dBm   
          RTS thr:off   Fragment thr:off
          Power Management:off
          
wlan1mon  IEEE 802.11abgn  Mode:Monitor  Frequency:2.457 GHz  Tx-Power=30 dBm   
          RTS thr:off   Fragment thr:off
          Power Management:off
          
============DMESG==========
[    0.000000] Linux version 3.18.84 (@6f9b60cbecc9) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #21 Thu Mar 28 20:54:56 UTC 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9344 rev 3
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 803a7cf0, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=PINEAPPLE-TETRA console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),256k(caldata),-(mb0);ar934x-nfc:2048k(kernel),-(ubi) rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 125668K/131072K available (2748K kernel code, 126K rwdata, 580K rodata, 184K init, 187K bss, 5404K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is WiFi Pineapple TETRA
[    0.100000] ar71xx: using random MAC address for eth0
[    0.320000] ar71xx: using random MAC address for eth1
[    0.540000] registering PCI controller with io_map_base unset
[    0.550000] PCI host bridge to bus 0000:00
[    0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.560000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.560000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.570000] pci 0000:00:00.0: [168c:abcd] type 00 class 0x020000
[    0.570000] pci 0000:00:00.0: invalid calibration data
[    0.570000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[    0.570000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.570000] pci 0000:00:00.0: supports D1
[    0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.570000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[    0.580000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[    0.580000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.590000] Switched to clocksource MIPS
[    0.590000] NET: Registered protocol family 2
[    0.600000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.600000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.610000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.620000] TCP: reno registered
[    0.620000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.630000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.630000] NET: Registered protocol family 1
[    0.640000] PCI: CLS 0 bytes, default 32
[    0.640000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.670000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.670000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.680000] msgmni has been set to 245
[    0.690000] io scheduler noop registered
[    0.690000] io scheduler deadline registered (default)
[    0.700000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.710000] console [ttyS0] disabled
[    0.730000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.740000] console [ttyS0] enabled
[    0.750000] bootconsole [early0] disabled
[    0.760000] m25p80 spi0.0: found s25fl008k, expected m25p80
[    0.760000] m25p80 spi0.0: s25fl008k (1024 Kbytes)
[    0.770000] 4 cmdlinepart partitions found on MTD device spi0.0
[    0.780000] Creating 4 MTD partitions on "spi0.0":
[    0.780000] 0x000000000000-0x000000040000 : "u-boot"
[    0.790000] 0x000000040000-0x000000080000 : "u-boot-env"
[    0.790000] 0x000000080000-0x0000000c0000 : "caldata"
[    0.800000] 0x0000000c0000-0x000000100000 : "mb0"
[    0.800000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    0.810000] nand: Micron MT29F16G08ABABAWP 2GiB 3.3V 8-bit
[    0.820000] nand: 2048MiB, SLC, page size: 4096, OOB size: 224
[    0.820000] Scanning device for bad blocks
[    1.100000] random: nonblocking pool is initialized
[    1.100000] 2 cmdlinepart partitions found on MTD device ar934x-nfc
[    1.110000] Creating 2 MTD partitions on "ar934x-nfc":
[    1.110000] 0x000000000000-0x000000200000 : "kernel"
[    1.120000] 0x000000200000-0x000080000000 : "ubi"
[    1.140000] libphy: ag71xx_mdio: probed
[    1.730000] ag71xx-mdio.1: Found an AR934X built-in switch
[    1.770000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    2.370000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[    2.380000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.380000] TCP: cubic registered
[    2.390000] NET: Registered protocol family 17
[    2.390000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.410000] 8021q: 802.1Q VLAN Support v1.8
[    2.410000] UBI: auto-attach mtd5
[    2.420000] UBI: attaching mtd5 to ubi0
[   15.050000] UBI: scanning is finished
[   15.080000] UBI: attached mtd5 (name "ubi", size 2046 MiB) to ubi0
[   15.090000] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes
[   15.100000] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[   15.100000] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
[   15.110000] UBI: good PEBs: 4092, bad PEBs: 0, corrupted PEBs: 0
[   15.120000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[   15.120000] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2111571258
[   15.130000] UBI: available PEBs: 0, total reserved PEBs: 4092, PEBs reserved for bad PEB handling: 80
[   15.140000] UBI: background thread "ubi_bgt0d" started, PID 243
[   15.150000] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[   15.150000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[   15.170000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[   15.180000] Freeing unused kernel memory: 184K
[   16.800000] init: Console is alive
[   16.810000] init: - watchdog -
[   18.780000] usbcore: registered new interface driver usbfs
[   18.790000] usbcore: registered new interface driver hub
[   18.790000] usbcore: registered new device driver usb
[   18.840000] SCSI subsystem initialized
[   18.840000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.850000] ehci-platform: EHCI generic platform driver
[   18.860000] ehci-platform ehci-platform: EHCI Host Controller
[   18.870000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[   18.880000] ehci-platform ehci-platform: TX-TX IDP fix enabled
[   18.880000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[   18.910000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[   18.910000] hub 1-0:1.0: USB hub found
[   18.920000] hub 1-0:1.0: 1 port detected
[   18.920000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.930000] ohci-platform: OHCI generic platform driver
[   18.940000] uhci_hcd: USB Universal Host Controller Interface driver
[   18.950000] usbcore: registered new interface driver usb-storage
[   19.890000] init: - preinit -
[   21.390000] mount_root: loading kmods from internal overlay
[   21.800000] UBIFS: background thread "ubifs_bgt0_1" started, PID 335
[   22.300000] UBIFS: recovery needed
[   22.880000] eth0: link up (1000Mbps/Full duplex)
[   23.160000] UBIFS: recovery completed
[   23.160000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   23.170000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[   23.180000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
[   23.190000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[   23.190000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2274059E-4D45-48A5-BB50-854CEC8BEC57, small LPT model
[   23.210000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   23.230000] block: extroot: not configured
[   23.230000] UBIFS: un-mount UBI device 0, volume 1
[   23.240000] UBIFS: background thread "ubifs_bgt0_1" stops
[   23.250000] UBIFS: background thread "ubifs_bgt0_1" started, PID 338
[   24.290000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   24.300000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[   24.310000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
[   24.320000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[   24.320000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2274059E-4D45-48A5-BB50-854CEC8BEC57, small LPT model
[   24.350000] mount_root: loading kmods from internal overlay
[   24.580000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   24.600000] block: extroot: not configured
[   24.600000] mount_root: switching to jffs2 overlay
[   24.650000] eth0: link down
[   24.670000] procd: - early -
[   24.670000] procd: - watchdog -
[   25.520000] procd: - ubus -
[   26.540000] procd: - init -
[   28.830000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   28.840000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   28.960000] ath: EEPROM regdomain: 0x0
[   28.960000] ath: EEPROM indicates default country code should be used
[   28.960000] ath: doing EEPROM country->regdmn map search
[   28.960000] ath: country maps to regdmn code: 0x3a
[   28.960000] ath: Country alpha2 being used: US
[   28.960000] ath: Regpair used: 0x3a
[   28.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   28.970000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
[   28.980000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   29.010000] ath: EEPROM regdomain: 0x0
[   29.010000] ath: EEPROM indicates default country code should be used
[   29.010000] ath: doing EEPROM country->regdmn map search
[   29.010000] ath: country maps to regdmn code: 0x3a
[   29.010000] ath: Country alpha2 being used: US
[   29.010000] ath: Regpair used: 0x3a
[   29.020000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   29.030000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[   29.250000] usbcore: registered new interface driver ath9k_htc
[   29.280000] RPC: Registered named UNIX socket transport module.
[   29.280000] RPC: Registered udp transport module.
[   29.290000] RPC: Registered tcp transport module.
[   29.290000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   29.320000] tun: Universal TUN/TAP device driver, 1.6
[   29.320000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   29.370000] usbcore: registered new interface driver rt2800usb
[   29.380000] usbcore: registered new interface driver rtl8187
[   29.420000] usbcore: registered new interface driver rtl8192cu
[   29.500000] usbcore: registered new interface driver cdc_acm
[   29.510000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   29.520000] usbcore: registered new interface driver cdc_wdm
[   29.540000] nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
[   29.600000] usbcore: registered new interface driver ums-alauda
[   29.610000] usbcore: registered new interface driver ums-cypress
[   29.620000] usbcore: registered new interface driver ums-datafab
[   29.630000] usbcore: registered new interface driver ums-freecom
[   29.640000] usbcore: registered new interface driver ums-isd200
[   29.640000] usbcore: registered new interface driver ums-jumpshot
[   29.650000] usbcore: registered new interface driver ums-karma
[   29.660000] usbcore: registered new interface driver ums-sddr09
[   29.670000] usbcore: registered new interface driver ums-sddr55
[   29.680000] usbcore: registered new interface driver ums-usbat
[   29.700000] usbcore: registered new interface driver usbserial
[   29.700000] usbcore: registered new interface driver usbserial_generic
[   29.710000] usbserial: USB Serial support registered for generic
[   29.750000] xt_time: kernel timezone is -0000
[   29.750000] usbcore: registered new interface driver asix
[   29.760000] usbcore: registered new interface driver ax88179_178a
[   29.770000] usbcore: registered new interface driver cdc_ether
[   29.780000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.800000] usbcore: registered new interface driver pl2303
[   29.810000] usbserial: USB Serial support registered for pl2303
[   29.820000] PPP generic driver version 2.4.2
[   29.830000] NET: Registered protocol family 24
[   29.830000] usbcore: registered new interface driver qmi_wwan
[   29.840000] usbcore: registered new interface driver rndis_host
[   29.850000] usbcore: registered new interface driver sierra_net
[   29.870000] usbcore: registered new interface driver option
[   29.870000] usbserial: USB Serial support registered for GSM modem (1-port)
[   39.900000] device eth1 entered promiscuous mode
[   39.900000] br-lan: port 1(eth1) entered forwarding state
[   39.910000] br-lan: port 1(eth1) entered forwarding state
[   40.110000] br-lan: port 1(eth1) entered disabled state
[   42.910000] eth0: link up (1000Mbps/Full duplex)
[   42.910000] eth1: link up (100Mbps/Full duplex)
[   42.950000] br-lan: port 1(eth1) entered forwarding state
[   42.950000] br-lan: port 1(eth1) entered forwarding state
[   44.950000] br-lan: port 1(eth1) entered forwarding state
[   45.740000] device wlan0 entered promiscuous mode
[   45.750000] br-lan: port 2(wlan0) entered forwarding state
[   45.750000] br-lan: port 2(wlan0) entered forwarding state
[   46.080000] device wlan0-1 entered promiscuous mode
[   46.100000] br-lan: port 3(wlan0-1) entered forwarding state
[   46.100000] br-lan: port 3(wlan0-1) entered forwarding state
[   46.110000] br-lan: port 3(wlan0-1) entered disabled state
[   47.750000] br-lan: port 2(wlan0) entered forwarding state
[   47.850000] br-lan: port 3(wlan0-1) entered forwarding state
[   47.860000] br-lan: port 3(wlan0-1) entered forwarding state
[   49.860000] br-lan: port 3(wlan0-1) entered forwarding state
[  584.540000] device wlan1mon entered promiscuous mode
============LOGREAD========
Thu Mar 28 20:48:18 2019 user.info kernel: [   19.890000] init: - preinit -
Thu Mar 28 20:48:18 2019 user.info kernel: [   21.390000] mount_root: loading kmods from internal overlay
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   21.800000] UBIFS: background thread "ubifs_bgt0_1" started, PID 335
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   22.300000] UBIFS: recovery needed
Thu Mar 28 20:48:18 2019 kern.info kernel: [   22.880000] eth0: link up (1000Mbps/Full duplex)
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.160000] UBIFS: recovery completed
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.160000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.170000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.180000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.190000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.190000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2274059E-4D45-48A5-BB50-854CEC8BEC57, small LPT model
Thu Mar 28 20:48:18 2019 user.info kernel: [   23.210000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Thu Mar 28 20:48:18 2019 user.info kernel: [   23.230000] block: extroot: not configured
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.230000] UBIFS: un-mount UBI device 0, volume 1
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.240000] UBIFS: background thread "ubifs_bgt0_1" stops
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   23.250000] UBIFS: background thread "ubifs_bgt0_1" started, PID 338
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   24.290000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   24.300000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   24.310000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   24.320000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
Thu Mar 28 20:48:18 2019 kern.notice kernel: [   24.320000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2274059E-4D45-48A5-BB50-854CEC8BEC57, small LPT model
Thu Mar 28 20:48:18 2019 user.info kernel: [   24.350000] mount_root: loading kmods from internal overlay
Thu Mar 28 20:48:18 2019 user.info kernel: [   24.580000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Thu Mar 28 20:48:18 2019 user.info kernel: [   24.600000] block: extroot: not configured
Thu Mar 28 20:48:18 2019 user.info kernel: [   24.600000] mount_root: switching to jffs2 overlay
Thu Mar 28 20:48:18 2019 kern.info kernel: [   24.650000] eth0: link down
Thu Mar 28 20:48:18 2019 user.info kernel: [   24.670000] procd: - early -
Thu Mar 28 20:48:18 2019 user.info kernel: [   24.670000] procd: - watchdog -
Thu Mar 28 20:48:18 2019 user.info kernel: [   25.520000] procd: - ubus -
Thu Mar 28 20:48:18 2019 user.info kernel: [   26.540000] procd: - init -
Thu Mar 28 20:48:18 2019 kern.info kernel: [   28.830000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Thu Mar 28 20:48:18 2019 kern.info kernel: [   28.840000] Backport generated by backports.git backports-20151218-0-g2f58d9d
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.960000] ath: EEPROM regdomain: 0x0
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.960000] ath: EEPROM indicates default country code should be used
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.960000] ath: doing EEPROM country->regdmn map search
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.960000] ath: country maps to regdmn code: 0x3a
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.960000] ath: Country alpha2 being used: US
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.960000] ath: Regpair used: 0x3a
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   28.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar 28 20:48:18 2019 kern.info kernel: [   28.970000] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
Thu Mar 28 20:48:18 2019 kern.warn kernel: [   28.980000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.010000] ath: EEPROM regdomain: 0x0
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.010000] ath: EEPROM indicates default country code should be used
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.010000] ath: doing EEPROM country->regdmn map search
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.010000] ath: country maps to regdmn code: 0x3a
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.010000] ath: Country alpha2 being used: US
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.010000] ath: Regpair used: 0x3a
Thu Mar 28 20:48:18 2019 kern.debug kernel: [   29.020000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.030000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.250000] usbcore: registered new interface driver ath9k_htc
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.280000] RPC: Registered named UNIX socket transport module.
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.280000] RPC: Registered udp transport module.
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.290000] RPC: Registered tcp transport module.
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.290000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.320000] tun: Universal TUN/TAP device driver, 1.6
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.320000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.370000] usbcore: registered new interface driver rt2800usb
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.380000] usbcore: registered new interface driver rtl8187
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.420000] usbcore: registered new interface driver rtl8192cu
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.500000] usbcore: registered new interface driver cdc_acm
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.510000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.520000] usbcore: registered new interface driver cdc_wdm
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.540000] nf_conntrack version 0.5.0 (1966 buckets, 7864 max)
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.600000] usbcore: registered new interface driver ums-alauda
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.610000] usbcore: registered new interface driver ums-cypress
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.620000] usbcore: registered new interface driver ums-datafab
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.630000] usbcore: registered new interface driver ums-freecom
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.640000] usbcore: registered new interface driver ums-isd200
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.640000] usbcore: registered new interface driver ums-jumpshot
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.650000] usbcore: registered new interface driver ums-karma
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.660000] usbcore: registered new interface driver ums-sddr09
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.670000] usbcore: registered new interface driver ums-sddr55
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.680000] usbcore: registered new interface driver ums-usbat
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.700000] usbcore: registered new interface driver usbserial
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.700000] usbcore: registered new interface driver usbserial_generic
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.710000] usbserial: USB Serial support registered for generic
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.750000] xt_time: kernel timezone is -0000
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.750000] usbcore: registered new interface driver asix
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.760000] usbcore: registered new interface driver ax88179_178a
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.770000] usbcore: registered new interface driver cdc_ether
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.780000] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.800000] usbcore: registered new interface driver pl2303
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.810000] usbserial: USB Serial support registered for pl2303
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.820000] PPP generic driver version 2.4.2
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.830000] NET: Registered protocol family 24
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.830000] usbcore: registered new interface driver qmi_wwan
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.840000] usbcore: registered new interface driver rndis_host
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.850000] usbcore: registered new interface driver sierra_net
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.870000] usbcore: registered new interface driver option
Thu Mar 28 20:48:18 2019 kern.info kernel: [   29.870000] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Mar 28 20:48:21 2019 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Thu Mar 28 20:48:22 2019 daemon.err block: /dev/ubi0_1 is already mounted
Thu Mar 28 20:48:26 2019 kern.info kernel: [   39.900000] device eth1 entered promiscuous mode
Thu Mar 28 20:48:26 2019 kern.info kernel: [   39.900000] br-lan: port 1(eth1) entered forwarding state
Thu Mar 28 20:48:26 2019 kern.info kernel: [   39.910000] br-lan: port 1(eth1) entered forwarding state
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'lan' is now up
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'wan' is enabled
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'wan6' is enabled
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Network device 'lo' link is up
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Bridge 'br-lan' link is down
Thu Mar 28 20:48:26 2019 daemon.notice netifd: Interface 'lan' has link connectivity loss
Thu Mar 28 20:48:26 2019 kern.info kernel: [   40.110000] br-lan: port 1(eth1) entered disabled state
Thu Mar 28 20:48:27 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar 28 20:48:29 2019 daemon.notice netifd: radio1 (1233): Interface 0 setup failed: BRIDGE_NOT_ALLOWED
Thu Mar 28 20:48:29 2019 kern.info kernel: [   42.910000] eth0: link up (1000Mbps/Full duplex)
Thu Mar 28 20:48:29 2019 kern.info kernel: [   42.910000] eth1: link up (100Mbps/Full duplex)
Thu Mar 28 20:48:29 2019 kern.info kernel: [   42.950000] br-lan: port 1(eth1) entered forwarding state
Thu Mar 28 20:48:29 2019 kern.info kernel: [   42.950000] br-lan: port 1(eth1) entered forwarding state
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Interface 'wan' is setting up now
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Interface 'wan6' is now up
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Network device 'eth1' link is up
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Bridge 'br-lan' link is up
Thu Mar 28 20:48:29 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Mar 28 20:48:29 2019 daemon.notice netifd: wan (1411): udhcpc (v1.23.2) started
Thu Mar 28 20:48:30 2019 daemon.notice netifd: wan (1411): Sending discover...
Thu Mar 28 20:48:31 2019 kern.info kernel: [   44.950000] br-lan: port 1(eth1) entered forwarding state
Thu Mar 28 20:48:31 2019 daemon.notice netifd: wan (1411): Sending select for (edit)...
Thu Mar 28 20:48:31 2019 daemon.notice netifd: wan (1411): Lease of (edit) obtained, lease time 86400
Thu Mar 28 20:48:31 2019 daemon.notice netifd: radio0 (1232): Configuration file: /var/run/hostapd-phy0.conf
Thu Mar 28 20:48:32 2019 daemon.notice netifd: Interface 'wan' is now up
Thu Mar 28 20:48:32 2019 kern.info kernel: [   45.740000] device wlan0 entered promiscuous mode
Thu Mar 28 20:48:32 2019 kern.info kernel: [   45.750000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 28 20:48:32 2019 kern.info kernel: [   45.750000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 28 20:48:32 2019 daemon.notice netifd: radio0 (1232): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar 28 20:48:32 2019 daemon.notice netifd: radio0 (1232): Using interface wlan0 with hwaddr (edit) and ssid "Pineapple_edit"
Thu Mar 28 20:48:32 2019 kern.info kernel: [   46.080000] device wlan0-1 entered promiscuous mode
Thu Mar 28 20:48:32 2019 kern.info kernel: [   46.100000] br-lan: port 3(wlan0-1) entered forwarding state
Thu Mar 28 20:48:32 2019 kern.info kernel: [   46.100000] br-lan: port 3(wlan0-1) entered forwarding state
Thu Mar 28 20:48:32 2019 kern.info kernel: [   46.110000] br-lan: port 3(wlan0-1) entered disabled state
Thu Mar 28 20:48:32 2019 daemon.notice netifd: radio0 (1232): Using interface wlan0-1 with hwaddr edit and ssid "edit"
Thu Mar 28 20:48:34 2019 kern.info kernel: [   47.750000] br-lan: port 2(wlan0) entered forwarding state
Thu Mar 28 20:48:34 2019 auth.info sshd[1528]: Server listening on 0.0.0.0 port 22.
Thu Mar 28 20:48:34 2019 kern.info kernel: [   47.850000] br-lan: port 3(wlan0-1) entered forwarding state
Thu Mar 28 20:48:34 2019 kern.info kernel: [   47.860000] br-lan: port 3(wlan0-1) entered forwarding state
Thu Mar 28 20:48:34 2019 daemon.notice netifd: radio0 (1232): wlan0: interface state COUNTRY_UPDATE->ENABLED
Thu Mar 28 20:48:34 2019 daemon.notice netifd: radio0 (1232): wlan0: AP-ENABLED
Thu Mar 28 20:48:34 2019 user.emerg syslog: setting up led ETH0
Thu Mar 28 20:48:34 2019 user.emerg syslog: setting up led WLAN0
Thu Mar 28 20:48:34 2019 user.emerg syslog: setting up led WLAN1MON
Thu Mar 28 20:48:36 2019 kern.info kernel: [   49.860000] br-lan: port 3(wlan0-1) entered forwarding state
Thu Mar 28 20:48:36 2019 daemon.notice netifd: radio0 (1232): OK
Thu Mar 28 20:48:36 2019 daemon.notice netifd: radio0 (1232): OK
Thu Mar 28 20:48:36 2019 daemon.notice netifd: radio0 (1232): OK
Thu Mar 28 20:48:36 2019 daemon.notice netifd: radio0 (1232): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Thu Mar 28 20:48:36 2019 daemon.notice netifd: radio0 (1232): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory
Thu Mar 28 20:48:37 2019 daemon.notice netifd: Network device 'wlan0' link is up
Thu Mar 28 20:48:37 2019 daemon.notice netifd: Network device 'wlan0-1' link is up
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: started, version 2.78 cachesize 150
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: DNS service limited to local subnets
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: using local addresses only for domain lan
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: reading /tmp/resolv.conf.auto
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: using local addresses only for domain lan
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: using nameserver 8.8.4.4#53
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: using nameserver 8.8.4.4#53
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: using nameserver edit#53
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: read /etc/hosts - 1 addresses
Thu Mar 28 20:48:38 2019 daemon.info dnsmasq[1693]: read /tmp/hosts/dhcp - 0 addresses
Thu Mar 28 20:48:38 2019 user.emerg syslog: [!! 28-03-2019 20:48:38] [INTERFACE] Failed to create capture handle for wlan1mon: wlan1mon: No such device exists (SIOCGIFHWADDR: No such device)
Thu Mar 28 20:48:38 2019 user.notice root: =========== PineAP booted ==============
Thu Mar 28 20:48:38 2019 daemon.info procd: - init complete -
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1693]: exiting on receipt of SIGTERM
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: started, version 2.78 cachesize 150
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: DNS service limited to local subnets
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq-dhcp[1815]: DHCP, IP range edit, lease time 12h
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: using local addresses only for domain lan
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: reading /tmp/resolv.conf.auto
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: using local addresses only for domain lan
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: using nameserver 8.8.4.4#53
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: using nameserver 8.8.4.4#53
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: using nameserver edit#53
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: read /etc/hosts - 1 addresses
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq[1815]: read /tmp/hosts/dhcp - 1 addresses
Thu Mar 28 20:48:39 2019 daemon.info dnsmasq-dhcp[1815]: read /etc/ethers - 0 addresses
Thu Mar 28 20:48:39 2019 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0)
Thu Mar 28 20:48:40 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth0)
Thu Mar 28 21:13:15 2019 kern.info kernel: [  584.540000] device wlan1mon entered promiscuous mode
===== WIRELESS CONFIG======

config wifi-device 'radio0'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'platform/ar934x_wmac'
    option htmode 'HT20'
    option country 'US'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'Pineapple_edit'
    option maxassoc '100'
    option encryption 'none'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option encryption 'psk2+ccmp'
    option ssid 'edit'
    option key 'edit'

config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'PineAP_Enterprise'
    option macaddr '00:11:22:33:44:55'
    option encryption 'wpa2+ccmp'
    option key '12345678'
    option server '127.0.0.1'
    option disabled '1'

config wifi-device 'radio1'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option path 'pci0000:00/0000:00:00.0'
    option htmode 'HT20'
    option country 'US'

config wifi-iface
    option device 'radio1'
    option ifname 'wlan1'
    option network 'lan'
    option mode 'sta'
    option ssid 'Pineapple_edit'
    option encryption 'none'

============SURVEY=========
OK
Usage: /pineapple/modules/Help/files/dumpscan.php [scan id]

 

Share this post


Link to post
Share on other sites
5 hours ago, ZombieTech said:

Also, the configuration options do not hold after saving them in the PineAP module.

I had that but after a reboot it seems fine.

Share this post


Link to post
Share on other sites

Hi everyone,

We've confirmed an issue affecting the TETRA, with Recon not showing results on the selected band after already scanning on another. We've fixed the problem, and are just going through extra tests to make sure the issue is resolved.

Firmware version 2.5.2 is now available via OTA or https://downloads.hak5.org. Thanks to everyone for their continued feedback :).

 

  • Like 1

Share this post


Link to post
Share on other sites
16 hours ago, Foxtrot said:

That's odd - You should only see that message if you aren't running on a NANO or a TETRA - Could you attach your debug log (Help module -> Generate Debug File) to a reply here?

We just released 2.5.1 that should fix this issue. Sorry for the inconvenience! Let me know how it goes for you.

Thanks 

Hi @Foxtrot I seem to have a similar issue to the below problem and I'm already on 2.5.2, after i disable the Pineap daemon, the wlan1 red led is still left flashing, and wlan1mon does not change back to wlan1, is it supposed to do that? 

17 hours ago, b0N3z said:

Why does it say "Unsupported Device" in the top left where it usually says Wifi Pineapple?

edit: also will not allow me to start pineap and do recons but red light is flashing and wlan1mon is up

@Foxtrot

P.S. Sorry Pineapple newbie here

Share this post


Link to post
Share on other sites

Awesome, 2.5.2 is working great.  Thank you

Share this post


Link to post
Share on other sites

Thanks for 2.5.2 - Recon is now working (and reporting) on both bands.

BTW

Share this post


Link to post
Share on other sites
Posted (edited)
On 3/29/2019 at 6:18 PM, dharshanduck said:

after i disable the Pineap daemon, the wlan1 red led is still left flashing, and wlan1mon does not change back to wlan1, is it supposed to do that?

Yes its normal, the red flashing LED is indicating wlan1 is in monitor mode. So will stop flashing when you take wlan1mon out of monitor mode.

Edited by Just_a_User
  • Upvote 2

Share this post


Link to post
Share on other sites
23 hours ago, Just_a_User said:

Yes its normal, the red flashing LED is indicating wlan1 is in monitor mode. So will stop flashing when you take wlan1mon out of monitor mode.

Thanks, but any reason why it stays on?? and is not coded to turn off airmon-ng?

Share this post


Link to post
Share on other sites
Posted (edited)
6 minutes ago, dharshanduck said:

Thanks, but any reason why it stays on?? and is not coded to turn off airmon-ng?

Not sure, it never has. Maybe to be faster for next scan or other tools, such as the handshake grabber built into recon.

You can drop it out of monitor mode using the GUI by clicking the Update Access Points button on networking page, but will also reset management network so if you are connected using that it will drop out briefly.

Edited by Just_a_User

Share this post


Link to post
Share on other sites
1 minute ago, Just_a_User said:

Not sure, it never has. Maybe to be faster for next scan or other tools, such as the handshake grabber built into recon.

You can drop it out of monitor mode using the GUI by clicking the Update Access Points button on networking page, but will also reset management network so if you are connected using that it will drop out briefly.

Ahh alright, I just go into ssh and do 

airmon-ng stop wlan1mon

Was just curious about it. 

Share this post


Link to post
Share on other sites
Posted (edited)
3 minutes ago, dharshanduck said:

Ahh alright, I just go into ssh and do 


airmon-ng stop wlan1mon

Was just curious about it. 

Sure I do to, but it can be handy to know how from the GUI if out and about or on a mobile without a terminal app installed. I tend to write my responses not only for the OP but also for others reading at later dates.

Edited by Just_a_User

Share this post


Link to post
Share on other sites
2 minutes ago, Just_a_User said:

Sure I do to, but it can be handy to know how from the GUI if out and about or on a mobile without a terminal app installed. I tend to write my responses not only for the OP but also for others reading at later dates.

Thats awesome man.

Something for me to test later, the "Update Access Points" button.

Share this post


Link to post
Share on other sites
On 3/29/2019 at 12:18 PM, dharshanduck said:

Hi @Foxtrot I seem to have a similar issue to the below problem and I'm already on 2.5.2, after i disable the Pineap daemon, the wlan1 red led is still left flashing, and wlan1mon does not change back to wlan1, is it supposed to do that? 

P.S. Sorry Pineapple newbie here

I’m seeing a similar issue on my Tetra, after updating to 2.5.2, my continuous recon scans do not show any results.   Doing timed (30s, 1min, etc) recon scans do show results. 

Share this post


Link to post
Share on other sites
Posted (edited)

After some time using the 2.5.2 firmware i noticed that the clients connecting are showing their "hostname" but the SSID name they connect to is missing - I did a factory reset, waited some minutes until some SSID's were cloned and then connected to one of them with my phone, but I do still not see the SSID i connected to in the Dashboard view. 

Does anyone else have the same problem ? 

Screenshot from 2019-04-12 08-04-33.png

Edited by Thermostaten

Share this post


Link to post
Share on other sites
7 hours ago, Thermostaten said:

After some time using the 2.5.2 firmware i noticed that the clients connecting are showing their "hostname" but the SSID name they connect to is missing - I did a factory reset, waited some minutes until some SSID's were cloned and then connected to one of them with my phone, but I do still not see the SSID i connected to in the Dashboard view. 

Does anyone else have the same problem ? 

Screenshot from 2019-04-12 08-04-33.png

Hi,

We noticed this issue while testing a forthcoming update, it has already been fixed and is pending release, likely within the next few days.

Thank you!

  • Like 1

Share this post


Link to post
Share on other sites

Psst: Bulletins on the Dashboard has not been updated since 2016-08-23.

It is a nice button to press to check the internet connection - is it still relevant to be there ?

Share this post


Link to post
Share on other sites

I received my Tetra yesterday, updated to latest firmware (2.5.2) during setup. 

 

Recon works fine, went to PineAP and checked the boxes to add SSIDs to the pool, allow associations and to broadcast the pool (all boxes checked and daemon is enabled). The pool list never refreshes with new SSIDs. I can add from the scan or manually and they broadcast, however, when I connect using another device I get a message "Unable to Join the network XXXXXX" I get this even on the OpenSSID. The AP Management SSID connects just fine. 

This is right out of the box, following all the instructions. I have rebooted and restored to factory defaults twice. 

Any suggestions?

Share this post


Link to post
Share on other sites

Hi!

We just released 2.5.4, which on top of 2.5.3, addresses a few issues that have been reported since the launch of 2.5.2 (thank you!). Catch the change log in the first post and upgrade via the WiFi Pineapple OTA or via the Download Center.

  • Upvote 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...