brut3impact Posted February 19, 2019 Share Posted February 19, 2019 Hello All. Question, i have a Wifi Pineapple nano, and I want to connect it to kali linux, but I have had problems with the configuration. my scenario is the following 1. I have a MacbookPro, in the I have a virtual kali machine with Virtual Box 2. I have configured Virtual Box with Bridge Network and USB enabled. 3. Download the file the last update and the save in the machine 4. Download wp6.sh 5. Configure my Wifi Pineapple with wp6.sh but it is not enough to finish the configuration and it stays stuck! Step 1 of 3: Select Default Gateway Default gateway reported as 10.0.2.2 Use the above reported default gateway? [Y/n]? y Step 2 of 3: Select Internet Interface Internet interface reported as eth0 Use the above reported Internet interface? [Y/n]? y Step 3 of 3: Select WiFi Pineapple Interface Please connect the WiFi Pineapple to this computer. [Checking] Detected WiFi Pineapple on interface eth1 Use the above detected WiFi Pineapple interface? [Y/n]? y Settings saved. Saved Settings: Share Internet connection from eth0 to WiFi Pineapple at eth1 through default gateway 10.0.2.2 [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit Any Help??? Thanks Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.