Jump to content

Cannot connect to Tetra via WiFi

DBc00p3r

By DBc00p3r
in WiFi Pineapple TETRA

Recommended Posts

DBc00p3r Newbie

DBc00p3r

Posted
Posted

Hello I just bought a Tetra a couple of days ago so I am in the initial stages of learning about this fantastic device. I have set it up and downloaded the newest firmware. I am tethering through USB to my android device for internet.

Now to my problem: After doing an initial scan in 'Recon" mode and selecting a SSID to add to the pool, I can see the signal being broadcast from other devices. When I try to connect to the SSID from a different non-related device it will not make a connection. I have tried connecting to the 'Open SSID' signal that is always being broadcast and it will not allow me to connect to that signal either. The only signal I can connect to is the 'Management' signal. I have tried messing with all of the settings I could think of and when non of that worked I restored factory default settings and wrote this post. I am going to include the System Log and the Dmesg:

System Log: 

Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 15.130000] UBI: ubiblock0_0 created from ubi0:0(rootfs) 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 15.130000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 15.150000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 15.160000] Freeing unused kernel memory: 184K 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 16.780000] init: Console is alive 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 16.790000] init: - watchdog - 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.760000] usbcore: registered new interface driver usbfs 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.770000] usbcore: registered new interface driver hub 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.770000] usbcore: registered new device driver usb 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 18.820000] SCSI subsystem initialized 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.830000] ehci-platform: EHCI generic platform driver 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.840000] ehci-platform ehci-platform: EHCI Host Controller 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.850000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.880000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.880000] hub 1-0:1.0: USB hub found 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.890000] hub 1-0:1.0: 1 port detected 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.890000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.900000] ohci-platform: OHCI generic platform driver 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.910000] uhci_hcd: USB Universal Host Controller Interface driver 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 18.920000] usbcore: registered new interface driver usb-storage 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 19.210000] usb 1-1: new high-speed USB device number 2 using ehci-platform 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 19.860000] init: - preinit - 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 21.370000] mount_root: loading kmods from internal overlay 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 21.780000] UBIFS: background thread "ubifs_bgt0_1" started, PID 337 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 22.240000] UBIFS: recovery needed 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.040000] UBIFS: recovery completed 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.040000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.050000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.060000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs) 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.070000] UBIFS: reserved for root: 4952683 bytes (4836 KiB) 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.070000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2586906-0A7A-4CAA-AD8E-14EB9E530743, small LPT model 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 23.090000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 23.120000] block: extroot: not configured 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.120000] UBIFS: un-mount UBI device 0, volume 1 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.130000] UBIFS: background thread "ubifs_bgt0_1" stops 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 23.140000] UBIFS: background thread "ubifs_bgt0_1" started, PID 340 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 24.140000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 24.150000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 24.160000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs) 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 24.170000] UBIFS: reserved for root: 4952683 bytes (4836 KiB) 
Wed Oct 31 14:04:37 2018 kern.notice kernel: [ 24.180000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2586906-0A7A-4CAA-AD8E-14EB9E530743, small LPT model 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 24.200000] mount_root: loading kmods from internal overlay 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 24.430000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 24.450000] block: extroot: not configured 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 24.460000] mount_root: switching to jffs2 overlay 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 24.540000] procd: - early - 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 24.540000] procd: - watchdog - 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 25.230000] usb 1-1: USB disconnect, device number 2 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 25.890000] procd: - ubus - 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 26.250000] usb 1-1: new high-speed USB device number 3 using ehci-platform 
Wed Oct 31 14:04:37 2018 user.info kernel: [ 26.930000] procd: - init - 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.310000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.320000] Backport generated by backports.git backports-20151218-0-g2f58d9d 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.440000] ath: EEPROM regdomain: 0x0 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.440000] ath: EEPROM indicates default country code should be used 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.440000] ath: doing EEPROM country->regdmn map search 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.440000] ath: country maps to regdmn code: 0x3a 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.440000] ath: Country alpha2 being used: US 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.440000] ath: Regpair used: 0x3a 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.450000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.460000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47 
Wed Oct 31 14:04:37 2018 kern.warn kernel: [ 31.460000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.500000] ath: EEPROM regdomain: 0x0 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.500000] ath: EEPROM indicates default country code should be used 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.500000] ath: doing EEPROM country->regdmn map search 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.500000] ath: country maps to regdmn code: 0x3a 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.500000] ath: Country alpha2 being used: US 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.500000] ath: Regpair used: 0x3a 
Wed Oct 31 14:04:37 2018 kern.debug kernel: [ 31.510000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.510000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.530000] usbcore: registered new interface driver ath9k_htc 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.560000] RPC: Registered named UNIX socket transport module. 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.560000] RPC: Registered udp transport module. 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.570000] RPC: Registered tcp transport module. 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.570000] RPC: Registered tcp NFSv4.1 backchannel transport module. 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.790000] tun: Universal TUN/TAP device driver, 1.6 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.790000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.820000] usbcore: registered new interface driver rt2800usb 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.840000] usbcore: registered new interface driver rtl8187 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.870000] usbcore: registered new interface driver rtl8192cu 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.930000] usbcore: registered new interface driver cdc_acm 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.940000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.950000] usbcore: registered new interface driver cdc_wdm 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 31.960000] nf_conntrack version 0.5.0 (1966 buckets, 7864 max) 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.010000] usbcore: registered new interface driver ums-alauda 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.030000] usbcore: registered new interface driver ums-cypress 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.030000] usbcore: registered new interface driver ums-datafab 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.040000] usbcore: registered new interface driver ums-freecom 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.050000] usbcore: registered new interface driver ums-isd200 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.060000] usbcore: registered new interface driver ums-jumpshot 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.070000] usbcore: registered new interface driver ums-karma 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.080000] usbcore: registered new interface driver ums-sddr09 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.110000] usbcore: registered new interface driver ums-sddr55 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.120000] usbcore: registered new interface driver ums-usbat 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.140000] usbcore: registered new interface driver usbserial 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.140000] usbcore: registered new interface driver usbserial_generic 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.150000] usbserial: USB Serial support registered for generic 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.220000] xt_time: kernel timezone is -0000 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.230000] usbcore: registered new interface driver asix 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.240000] usbcore: registered new interface driver ax88179_178a
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.250000] usbcore: registered new interface driver cdc_ether 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.270000] ip_tables: (C) 2000-2006 Netfilter Core Team 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.290000] usbcore: registered new interface driver pl2303 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.300000] usbserial: USB Serial support registered for pl2303 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.310000] PPP generic driver version 2.4.2 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.310000] NET: Registered protocol family 24 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.320000] usbcore: registered new interface driver qmi_wwan 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.340000] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 02:51:65:30:66:62 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.350000] usbcore: registered new interface driver rndis_host 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.360000] usbcore: registered new interface driver sierra_net 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.370000] usbcore: registered new interface driver option 
Wed Oct 31 14:04:37 2018 kern.info kernel: [ 32.380000] usbserial: USB Serial support registered for GSM modem (1-port) 
Wed Oct 31 14:04:40 2018 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly 
Wed Oct 31 14:04:40 2018 daemon.err block: /dev/ubi0_1 is already mounted 
Wed Oct 31 14:04:43 2018 kern.info kernel: [ 40.640000] device eth1 entered promiscuous mode 
Wed Oct 31 14:04:43 2018 kern.info kernel: [ 40.640000] br-lan: port 1(eth1) entered forwarding state 
Wed Oct 31 14:04:43 2018 kern.info kernel: [ 40.650000] br-lan: port 1(eth1) entered forwarding state 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'lan' is enabled 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'lan' is setting up now 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'lan' is now up 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'loopback' is enabled 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'loopback' is setting up now 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'loopback' is now up 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'usb' is enabled 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'wan' is enabled 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'wan6' is enabled 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Bridge 'br-lan' link is up 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'lan' has link connectivity 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Network device 'lo' link is up 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'loopback' has link connectivity 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Network device 'usb0' link is up 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'usb' has link connectivity 
Wed Oct 31 14:04:43 2018 daemon.notice netifd: Interface 'usb' is setting up now 
Wed Oct 31 14:04:44 2018 daemon.notice netifd: usb (1417): udhcpc (v1.23.2) started 
Wed Oct 31 14:04:44 2018 daemon.notice netifd: usb (1417): Sending discover... 
Wed Oct 31 14:04:44 2018 daemon.notice netifd: usb (1417): Sending select for 192.168.42.52... 
Wed Oct 31 14:04:44 2018 daemon.notice netifd: usb (1417): Lease of 192.168.42.52 obtained, lease time 3600 
Wed Oct 31 14:04:44 2018 daemon.notice netifd: Bridge 'br-lan' link is down 
Wed Oct 31 14:04:44 2018 daemon.notice netifd: Interface 'lan' has link connectivity loss 
Wed Oct 31 14:04:44 2018 kern.info kernel: [ 41.920000] br-lan: port 1(eth1) entered disabled state 
Wed Oct 31 14:04:44 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) 
Wed Oct 31 14:04:45 2018 daemon.notice netifd: Interface 'usb' is now up 
Wed Oct 31 14:04:46 2018 kern.info kernel: [ 43.360000] eth1: link up (100Mbps/Full duplex) 
Wed Oct 31 14:04:46 2018 kern.info kernel: [ 43.360000] br-lan: port 1(eth1) entered forwarding state 
Wed Oct 31 14:04:46 2018 kern.info kernel: [ 43.370000] br-lan: port 1(eth1) entered forwarding state 
Wed Oct 31 14:04:46 2018 daemon.notice netifd: Network device 'eth1' link is up 
Wed Oct 31 14:04:46 2018 daemon.notice netifd: Bridge 'br-lan' link is up 
Wed Oct 31 14:04:46 2018 daemon.notice netifd: Interface 'lan' has link connectivity 
Wed Oct 31 14:04:46 2018 daemon.notice netifd: radio1 (1393): Interface 0 setup failed: BRIDGE_NOT_ALLOWED 
Wed Oct 31 14:04:48 2018 kern.info kernel: [ 45.370000] br-lan: port 1(eth1) entered forwarding state 
Wed Oct 31 14:04:48 2018 daemon.notice netifd: radio0 (1392): Configuration file: /var/run/hostapd-phy0.conf 
Wed Oct 31 14:04:49 2018 kern.info kernel: [ 46.050000] device wlan0 entered promiscuous mode 
Wed Oct 31 14:04:49 2018 kern.info kernel: [ 46.050000] br-lan: port 2(wlan0) entered forwarding state 
Wed Oct 31 14:04:49 2018 kern.info kernel: [ 46.060000] br-lan: port 2(wlan0) entered forwarding state 
Wed Oct 31 14:04:49 2018 daemon.notice netifd: radio0 (1392): Using interface wlan0 with hwaddr 00:13:37:a5:88:db and ssid "Starbucks-Guest" 
Wed Oct 31 14:04:49 2018 daemon.notice netifd: radio0 (1392): wlan0: interface state UNINITIALIZED->ENABLED 
Wed Oct 31 14:04:49 2018 daemon.notice netifd: radio0 (1392): wlan0: AP-ENABLED 
Wed Oct 31 14:04:51 2018 kern.info kernel: [ 48.060000] br-lan: port 2(wlan0) entered forwarding state 
Wed Oct 31 14:04:51 2018 user.emerg syslog: setting up led ETH0 
Wed Oct 31 14:04:51 2018 user.emerg syslog: setting up led WLAN0 
Wed Oct 31 14:04:51 2018 user.emerg syslog: setting up led WLAN1MON 
Wed Oct 31 14:04:51 2018 daemon.notice netifd: radio0 (1392): OK 
Wed Oct 31 14:04:52 2018 daemon.notice netifd: radio0 (1392): OK 
Wed Oct 31 14:04:52 2018 daemon.notice netifd: radio0 (1392): OK 
Wed Oct 31 14:04:52 2018 daemon.notice netifd: radio0 (1392): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory 
Wed Oct 31 14:04:52 2018 daemon.notice netifd: radio0 (1392): OK
Wed Oct 31 14:04:52 2018 daemon.notice netifd: radio0 (1392): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory 
Wed Oct 31 14:04:52 2018 daemon.notice netifd: Network device 'wlan0' link is up Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: started, version 2.78 cachesize 150 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: DNS service limited to local subnets 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq-dhcp[1743]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: using local addresses only for domain lan 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: reading /tmp/resolv.conf.auto 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: using local addresses only for domain lan 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: using nameserver 8.8.4.4#53 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: using nameserver 8.8.4.4#53 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: using nameserver 192.168.42.129#53 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: read /etc/hosts - 1 addresses 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq[1743]: read /tmp/hosts/dhcp - 1 addresses 
Wed Oct 31 14:04:53 2018 daemon.info dnsmasq-dhcp[1743]: read /etc/ethers - 0 addresses 
Wed Oct 31 14:04:55 2018 user.notice firewall: Reloading firewall due to ifup of usb (usb0) 
Wed Oct 31 14:04:55 2018 auth.info sshd[1664]: Server listening on 0.0.0.0 port 22. 
Wed Oct 31 14:04:57 2018 daemon.info modinfo: Usage: modinfo module 
Wed Oct 31 14:04:57 2018 daemon.info modinfo: Usage: modinfo module 
Wed Oct 31 14:04:59 2018 user.notice root: =========== PineAP booted ============== 
Wed Oct 31 14:04:59 2018 user.emerg syslog: OK Wed Oct 31 14:04:59 2018 daemon.info procd: - init complete -

Dmesg : 

[ 0.000000] Linux version 3.18.84 (@cc1b3ee85bbf) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #204 Wed Oct 24 00:10:59 UTC 2018 
[ 0.000000] bootconsole [early0] enabled 
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc) 
[ 0.000000] SoC: Atheros AR9344 rev 2 
[ 0.000000] Determined physical RAM map: 
[ 0.000000] memory: 08000000 @ 00000000 (usable) 
[ 0.000000] Initrd not found or empty - disabling initrd 
[ 0.000000] Zone ranges: 
[ 0.000000] Normal [mem 0x00000000-0x07ffffff] 
[ 0.000000] Movable zone start for each node 
[ 0.000000] Early memory node ranges 
[ 0.000000] node 0: [mem 0x00000000-0x07ffffff] 
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff] 
[ 0.000000] On node 0 totalpages: 32768 
[ 0.000000] free_area_init_node: node 0, pgdat 803a7cf0, node_mem_map 81000000 
[ 0.000000] Normal zone: 256 pages used for memmap 
[ 0.000000] Normal zone: 0 pages reserved 
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7 
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. 
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes 
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
[ 0.000000] pcpu-alloc: [0] 0 
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 
[ 0.000000] Kernel command line: board=PINEAPPLE-TETRA console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),256k(caldata),-(mb0);ar934x-nfc:2048k(kernel),-(ubi) rootfstype=squashfs noinitrd 
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) 
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) 
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) 
[ 0.000000] Writing ErrCtl register=00000000 
[ 0.000000] Readback ErrCtl register=00000000 
[ 0.000000] Memory: 125668K/131072K available (2748K kernel code, 126K rwdata, 580K rodata, 184K init, 187K bss, 5404K reserved, 0K cma-reserved) 
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
[ 0.000000] NR_IRQS:51 
[ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz 
[ 0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688) 
[ 0.070000] pid_max: default: 32768 minimum: 301 
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
[ 0.090000] NET: Registered protocol family 16 
[ 0.090000] MIPS: machine is WiFi Pineapple TETRA 
[ 0.100000] ar71xx: using random MAC address for eth0 
[ 0.320000] ar71xx: using random MAC address for eth1 
[ 0.540000] registering PCI controller with io_map_base unset 
[ 0.550000] PCI host bridge to bus 0000:00 
[ 0.550000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff] 
[ 0.560000] pci_bus 0000:00: root bus resource [io 0x0000] 
[ 0.560000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
[ 0.570000] pci 0000:00:00.0: [168c:abcd] type 00 class 0x020000 
[ 0.570000] pci 0000:00:00.0: invalid calibration data 
[ 0.570000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] 
[ 0.570000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] 
[ 0.570000] pci 0000:00:00.0: supports D1 
[ 0.570000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
[ 0.570000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 
[ 0.570000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit] 
[ 0.580000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref] 
[ 0.580000] pci 0000:00:00.0: using irq 40 for pin 1 
[ 0.590000] Switched to clocksource MIPS 
[ 0.590000] NET: Registered protocol family 2 
[ 0.600000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
[ 0.600000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
[ 0.610000] TCP: Hash tables configured (established 1024 bind 1024) 
[ 0.620000] TCP: reno registered 
[ 0.620000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
[ 0.630000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
[ 0.630000] NET: Registered protocol family 1 [ 0.640000] PCI: CLS 0 bytes, default 32 
[ 0.640000] futex hash table entries: 256 (order: -1, 3072 bytes) 
[ 0.670000] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
[ 0.670000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
[ 0.680000] msgmni has been set to 245 
[ 0.690000] io scheduler noop registered 
[ 0.690000] io scheduler deadline registered (default) 
[ 0.700000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
[ 0.710000] console [ttyS0] disabled 
[ 0.730000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A 
[ 0.740000] console [ttyS0] enabled 
[ 0.750000] bootconsole [early0] disabled 
[ 0.760000] m25p80 spi0.0: found s25fl008k, expected m25p80 
[ 0.760000] m25p80 spi0.0: s25fl008k (1024 Kbytes) 
[ 0.770000] 4 cmdlinepart partitions found on MTD device spi0.0 
[ 0.780000] Creating 4 MTD partitions on "spi0.0": 
[ 0.780000] 0x000000000000-0x000000040000 : "u-boot" 
[ 0.790000] 0x000000040000-0x000000080000 : "u-boot-env" 
[ 0.790000] 0x000000080000-0x0000000c0000 : "caldata" 
[ 0.800000] 0x0000000c0000-0x000000100000 : "mb0" 
[ 0.800000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48 
[ 0.810000] nand: Micron MT29F16G08ABABAWP 2GiB 3.3V 8-bit 
[ 0.820000] nand: 2048MiB, SLC, page size: 4096, OOB size: 224 
[ 0.820000] Scanning device for bad blocks 
[ 1.100000] random: nonblocking pool is initialized
[ 1.100000] 2 cmdlinepart partitions found on MTD device ar934x-nfc 
[ 1.110000] Creating 2 MTD partitions on "ar934x-nfc": 
[ 1.110000] 0x000000000000-0x000000200000 : "kernel" 
[ 1.120000] 0x000000200000-0x000080000000 : "ubi" 
[ 1.140000] libphy: ag71xx_mdio: probed 
[ 1.730000] ag71xx-mdio.1: Found an AR934X built-in switch 
[ 1.770000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII 
[ 2.370000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY] 
[ 2.380000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII 
[ 2.380000] TCP: cubic registered 
[ 2.390000] NET: Registered protocol family 17 
[ 2.390000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
[ 2.410000] 8021q: 802.1Q VLAN Support v1.8 
[ 2.410000] UBI: auto-attach mtd5 
[ 2.420000] UBI: attaching mtd5 to ubi0 
[ 12.560000] UBI: fixable bit-flip detected at PEB 3294 
[ 15.030000] UBI: scanning is finished 
[ 15.060000] UBI: attached mtd5 (name "ubi", size 2046 MiB) to ubi0 
[ 15.070000] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes 
[ 15.070000] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 
[ 15.080000] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192 
[ 15.090000] UBI: good PEBs: 4092, bad PEBs: 0, corrupted PEBs: 0 
[ 15.090000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128 
[ 15.100000] UBI: max/mean erase counter: 16/1, WL threshold: 4096, image sequence number: 858528783 
[ 15.110000] UBI: available PEBs: 0, total reserved PEBs: 4092, PEBs reserved for bad PEB handling: 80 
[ 15.120000] UBI: background thread "ubi_bgt0d" started, PID 243 
[ 15.130000] UBI: ubiblock0_0 created from ubi0:0(rootfs) 
[ 15.130000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem 
[ 15.150000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
[ 15.160000] Freeing unused kernel memory: 184K [ 16.780000] init: Console is alive 
[ 16.790000] init: - watchdog - 
[ 18.760000] usbcore: registered new interface driver usbfs 
[ 18.770000] usbcore: registered new interface driver hub 
[ 18.770000] usbcore: registered new device driver usb 
[ 18.820000] SCSI subsystem initialized 
[ 18.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
[ 18.830000] ehci-platform: EHCI generic platform driver 
[ 18.840000] ehci-platform ehci-platform: EHCI Host Controller 
[ 18.850000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 
[ 18.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 
[ 18.880000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 
[ 18.880000] hub 1-0:1.0: USB hub found [ 18.890000] hub 1-0:1.0: 1 port detected 
[ 18.890000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
[ 18.900000] ohci-platform: OHCI generic platform driver 
[ 18.910000] uhci_hcd: USB Universal Host Controller Interface driver 
[ 18.920000] usbcore: registered new interface driver usb-storage 
[ 19.210000] usb 1-1: new high-speed USB device number 2 using ehci-platform 
[ 19.860000] init: - preinit - 
[ 21.370000] mount_root: loading kmods from internal overlay 
[ 21.780000] UBIFS: background thread "ubifs_bgt0_1" started, PID 337 
[ 22.240000] UBIFS: recovery needed [ 23.040000] UBIFS: recovery completed 
[ 23.040000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
[ 23.050000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 23.060000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs) 
[ 23.070000] UBIFS: reserved for root: 4952683 bytes (4836 KiB) 
[ 23.070000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2586906-0A7A-4CAA-AD8E-14EB9E530743, small LPT model 
[ 23.090000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
[ 23.120000] block: extroot: not configured 
[ 23.120000] UBIFS: un-mount UBI device 0, volume 1 
[ 23.130000] UBIFS: background thread "ubifs_bgt0_1" stops 
[ 23.140000] UBIFS: background thread "ubifs_bgt0_1" started, PID 340 
[ 24.140000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
[ 24.150000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes 
[ 24.160000] UBIFS: FS size: 2049933312 bytes (1954 MiB, 3972 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs) 
[ 24.170000] UBIFS: reserved for root: 4952683 bytes (4836 KiB) 
[ 24.180000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2586906-0A7A-4CAA-AD8E-14EB9E530743, small LPT model 
[ 24.200000] mount_root: loading kmods from internal overlay 
[ 24.430000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab 
[ 24.450000] block: extroot: not configured [ 24.460000] mount_root: switching to jffs2 overlay [ 24.540000] procd: - early - [ 24.540000] procd: - watchdog - [ 25.230000] usb 1-1: USB disconnect, device number 2 [ 25.890000] procd: - ubus - [ 26.250000] usb 1-1: new high-speed USB device number 3 using ehci-platform [ 26.930000] procd: - init - [ 31.310000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 31.320000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 31.440000] ath: EEPROM regdomain: 0x0 [ 31.440000] ath: EEPROM indicates default country code should be used [ 31.440000] ath: doing EEPROM country->regdmn map search [ 31.440000] ath: country maps to regdmn code: 0x3a [ 31.440000] ath: Country alpha2 being used: US [ 31.440000] ath: Regpair used: 0x3a [ 31.450000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 31.460000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47 [ 31.460000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) [ 31.500000] ath: EEPROM regdomain: 0x0 
[ 31.500000] ath: EEPROM indicates default country code should be used 
[ 31.500000] ath: doing EEPROM country->regdmn map search 
[ 31.500000] ath: country maps to regdmn code: 0x3a 
[ 31.500000] ath: Country alpha2 being used: US 
[ 31.500000] ath: Regpair used: 0x3a 
[ 31.510000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' 
[ 31.510000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40 
[ 31.530000] usbcore: registered new interface driver ath9k_htc 
[ 31.560000] RPC: Registered named UNIX socket transport module. 
[ 31.560000] RPC: Registered udp transport module. 
[ 31.570000] RPC: Registered tcp transport module. 
[ 31.570000] RPC: Registered tcp NFSv4.1 backchannel transport module. 
[ 31.790000] tun: Universal TUN/TAP device driver, 1.6 
[ 31.790000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
[ 31.820000] usbcore: registered new interface driver rt2800usb 
[ 31.840000] usbcore: registered new interface driver rtl8187 
[ 31.870000] usbcore: registered new interface driver rtl8192cu 
[ 31.930000] usbcore: registered new interface driver cdc_acm 
[ 31.940000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
[ 31.950000] usbcore: registered new interface driver cdc_wdm 
[ 31.960000] nf_conntrack version 0.5.0 (1966 buckets, 7864 max) 
[ 32.010000] usbcore: registered new interface driver ums-alauda 
[ 32.030000] usbcore: registered new interface driver ums-cypress 
[ 32.030000] usbcore: registered new interface driver ums-datafab 
[ 32.040000] usbcore: registered new interface driver ums-freecom 
[ 32.050000] usbcore: registered new interface driver ums-isd200 
[ 32.060000] usbcore: registered new interface driver ums-jumpshot 
[ 32.070000] usbcore: registered new interface driver ums-karma 
[ 32.080000] usbcore: registered new interface driver ums-sddr09 
[ 32.110000] usbcore: registered new interface driver ums-sddr55 
[ 32.120000] usbcore: registered new interface driver ums-usbat 
[ 32.140000] usbcore: registered new interface driver usbserial 
[ 32.140000] usbcore: registered new interface driver usbserial_generic 
[ 32.150000] usbserial: USB Serial support registered for generic 
[ 32.220000] xt_time: kernel timezone is -0000 
[ 32.230000] usbcore: registered new interface driver asix 
[ 32.240000] usbcore: registered new interface driver ax88179_178a 
[ 32.250000] usbcore: registered new interface driver cdc_ether 
[ 32.270000] ip_tables: (C) 2000-2006 Netfilter Core Team 
[ 32.290000] usbcore: registered new interface driver pl2303 
[ 32.300000] usbserial: USB Serial support registered for pl2303 
[ 32.310000] PPP generic driver version 2.4.2 
[ 32.310000] NET: Registered protocol family 24 
[ 32.320000] usbcore: registered new interface driver qmi_wwan 
[ 32.340000] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 02:51:65:30:66:62 
[ 32.350000] usbcore: registered new interface driver rndis_host 
[ 32.360000] usbcore: registered new interface driver sierra_net 
[ 32.370000] usbcore: registered new interface driver option 
[ 32.380000] usbserial: USB Serial support registered for GSM modem (1-port) 
[ 40.640000] device eth1 entered promiscuous mode 
[ 40.640000] br-lan: port 1(eth1) entered forwarding state 
[ 40.650000] br-lan: port 1(eth1) entered forwarding state 
[ 41.920000] br-lan: port 1(eth1) entered disabled state 
[ 43.360000] eth1: link up (100Mbps/Full duplex)
[ 43.360000] br-lan: port 1(eth1) entered forwarding state 
[ 43.370000] br-lan: port 1(eth1) entered forwarding state 
[ 45.370000] br-lan: port 1(eth1) entered forwarding state 
[ 46.050000] device wlan0 entered promiscuous mode 
[ 46.050000] br-lan: port 2(wlan0) entered forwarding state 
[ 46.060000] br-lan: port 2(wlan0) entered forwarding state 
[ 48.060000] br-lan: port 2(wlan0) entered forwarding state

 Any help would greatly be appreciated thank you. 

Link to comment
Share on other sites
  • 2 weeks later...
CuChulaind Newbie

CuChulaind

Posted
Posted

I recently purchased a Tetra, and am experiencing the same. I was able to connect to the device at 1st, however no longer. I reverted back to 2.4.1, same issue. FWIW for a while I was able to connect to the device with android and iPhone's, not computers (Win 10 and *nix O/S's). Now however I can't connect with anything. This is also after several resets. Quite frustrating.

 

I am at a loss.

Link to comment
Share on other sites
ABM Newbie

ABM

Posted
Posted

Hi there, 

I tried today the same for my Tetra device. 

I set it up and download one module and finished from the setup to Start my attack, the wifi connection always refuse to work 

I am trying to connect through my iPhone as I am starting to setup my attack, but it doesn't work !!

Please could you give us the correct setup to make the wifi work?

Thanks 

Link to comment
Share on other sites
CuChulaind Newbie

CuChulaind

Posted
Posted

Hi all, 

 

Received some AMAZING support from hak5 after 2 weeks of multiple requests for help:

 

"I'm sorry you're having trouble with your TETRA. Please may I know how you are powering the device? Do you receive any IP address on your Linux machine when the light on the TETRA turns solid blue?"

 

Seriously hak5?

Link to comment
Share on other sites
Foxtrot Grand Master

Foxtrot

Posted
Posted
1 minute ago, CuChulaind said:

Hi all, 

Received some AMAZING support from hak5 after 2 weeks of multiple requests for help:

"I'm sorry you're having trouble with your TETRA. Please may I know how you are powering the device? Do you receive any IP address on your Linux machine when the light on the TETRA turns solid blue?"

Seriously hak5?

These issues are sometimes related to how much power you're providing the Pineapple. Most people provide power only via the USB cable but some computers (like laptops) don't provide enough power over USB. May I know the ticket ID for your request?

Link to comment
Share on other sites
CuChulaind Newbie

CuChulaind

Posted
Posted

For the record I am using the power supply that came with the device, and yes I get an IP when connected via the USB to eth1 (which works intermittently) of 172.16.42.206. This is using Linux per the support email, but the same work in Windows. I'll go steps further and report that I am running 2.4.1 after upgrading to 2.4.2 via PineAP and no improvement. On the web GUI I am able to connect through wlan1 to surrounding WiFi's, and pass this connection to my tethered Linux laptop. I still however can NOT connect to the device via wifi either by Linux, Windows 10, android or iPhone.

 

#56732

Link to comment
Share on other sites
rizzah Newbie

rizzah

Posted
Posted

I am having the same problem . I was working with an older firmware for a long time, eventho it had bugs, it did work when powered on dual USB. Now i upgraded last week to the latest firmware and no device can connect to the guest SSID, also, it does not catch any another SSIDs anymore.

Link to comment
Share on other sites
Just_a_User Newbie

Just_a_User

Posted
Posted
3 minutes ago, rizzah said:

I am having the same problem . I was working with an older firmware for a long time, eventho it had bugs, it did work when powered on dual USB. Now i upgraded last week to the latest firmware and no device can connect to the guest SSID, also, it does not catch any another SSIDs anymore.

open the pineapples filters page, set both filter modes to deny. then try again

Link to comment
Share on other sites
  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...