BitSlynger Posted September 9, 2018 Share Posted September 9, 2018 Just like everyone else my phone with not tether with the nano. I am tethered to pineapple with the Samsung Cord (Samsung S7 Active) USB tethering slider is to the right (blue shows on slider) Pineapple is linked to router via wifi ( pineapple broadcasting its own wifi channel) Computer and phone can link to pineapple only thru web browser Tried to stay tethered with Phone while ssh in with computer to do ifconfig dmesg route BusyBox v1.23.2 (2018-03-20 00:46:10 UTC) built-in shell (ash) .NN, .cxxdl' xMMO 'cdxxl' .c0WMNk;,NMMW:,xXMMKo. ...:KMMMWMMMMWMMMXc... . , .l0NMMMNXMMMMMMMMMMMMXNMMMWKl' xWd ,0Wd .':xNMMMMMMMMMMMMMMMMNkc'. ;KM0' lWMo .;dNMMMMMMMMMMMMMMWx:. .l. dMWc :WWo oNd .;xKWMMMMMMMMMMMMMMMMMMMMWXx:. dWX: dMW; ,NWo oMW: .. ..,lOXWMMMMMMMMMMWN0o;.. .. cWMl dMN' .XMx oWN; lc .loooolcooclooool. cXl oMWc kMK. oMW' ,WMl cMW: lWMW0d:;cdd:;:o0WMWl lMW: OMW' ,WMl 0M0 xMX. .XMd .lo:.,dXMMMMMMXd,.:ol. kMK. 'NMd KMO NMd KMk lMN. .;:xOxollccddcclloxOx:;. 'WM: OM0 xMX WMo .XMx dMK oNMMMMWOc;;ol;;cOWMMMMNo .XMl kMK dMN NMx 0MO :Kd. .lllcl;.:0WMMMMW0:.;lclll. .xK; 0MO kMX __ ___ ______ _ _____ _.:W0;,oxl:::oOOo:::lxo,;0W: _ .ONo KMk \ \ / (_| ____(_) | __ (_);cKMMMMWk:.;,.;kWMMMMKc;. | | .OX: \ \ /\ / / _| |__ _ | |__) _ _ __ ___ __ _ _ __ _ __ | | ___ NANO \ \/ \/ / | | __| | | | ___| | '_ \ / _ \/ _` | '_ \| '_ \| |/ _ \ 2.3.2 \ /\ / | | | | | | | | | | | | __| (_| | |_) | |_) | | __/ \/ \/ |_|_| |_| |_| |_|_| |_|\___|\__,_| .__/| .__/|_|\___|.com With OpenWrt CHAOS CALMER | | | | |_| |_| root@Pineapple:~# ifconfig br-lan Link encap:Ethernet HWaddr 00:C0:CA:A4:C6:6A inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19580 errors:0 dropped:2375 overruns:0 frame:0 TX packets:9492 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3611881 (3.4 MiB) TX bytes:2521736 (2.4 MiB) eth0 Link encap:Ethernet HWaddr 00:C0:CA:A4:C6:6A UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2385 (2.3 KiB) TX bytes:2385 (2.3 KiB) wlan0 Link encap:Ethernet HWaddr 00:C0:CA:A4:BE:95 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:11565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:2659185 (2.5 MiB) wlan0-1 Link encap:Ethernet HWaddr 02:C0:CA:A4:BE:95 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21259 errors:0 dropped:0 overruns:0 frame:0 TX packets:20763 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4781263 (4.5 MiB) TX bytes:5439712 (5.1 MiB) wlan1 Link encap:Ethernet HWaddr 00:C0:CA:A4:C2:8F inet addr:10.55.181.104 Bcast:10.55.181.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:74401 errors:0 dropped:4384 overruns:0 frame:0 TX packets:4374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8491268 (8.0 MiB) TX bytes:482563 (471.2 KiB) root@Pineapple:~# dmesg [ 0.000000] Linux version 3.18.84 (@334b530f4154) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #216 Tue Aug 21 02:21:42 UTC 2018 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.380000] Switched to clocksource MIPS [ 0.380000] NET: Registered protocol family 2 [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.400000] TCP: reno registered [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] NET: Registered protocol family 1 [ 0.420000] PCI: CLS 0 bytes, default 32 [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.450000] msgmni has been set to 118 [ 0.460000] io scheduler noop registered [ 0.460000] io scheduler deadline registered (default) [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.480000] console [ttyATH0] enabled [ 0.490000] bootconsole [early0] disabled [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 [ 0.520000] Creating 5 MTD partitions on "spi0.0": [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" [ 0.530000] 0x000000020000-0x00000013af78 : "kernel" [ 0.540000] 0x00000013af78-0x000000ff0000 : "rootfs" [ 0.540000] mtd: device 2 (rootfs) set to be root filesystem [ 0.540000] 1 squashfs-split partitions found on MTD device rootfs [ 0.550000] 0x000000d80000-0x000000ff0000 : "rootfs_data" [ 0.560000] 0x000000ff0000-0x000001000000 : "art" [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.590000] libphy: ag71xx_mdio: probed [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.200000] TCP: cubic registered [ 1.200000] NET: Registered protocol family 17 [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.240000] Freeing unused kernel memory: 240K [ 2.780000] init: Console is alive [ 2.780000] init: - watchdog - [ 5.440000] usbcore: registered new interface driver usbfs [ 5.440000] usbcore: registered new interface driver hub [ 5.450000] usbcore: registered new device driver usb [ 5.510000] SCSI subsystem initialized [ 5.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.520000] ehci-platform: EHCI generic platform driver [ 5.530000] ehci-platform ehci-platform: EHCI Host Controller [ 5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.570000] hub 1-0:1.0: USB hub found [ 5.570000] hub 1-0:1.0: 1 port detected [ 5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.590000] ohci-platform: OHCI generic platform driver [ 5.600000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.610000] usbcore: registered new interface driver usb-storage [ 5.900000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 5.990000] init: - preinit - [ 6.340000] hub 1-1:1.0: USB hub found [ 6.340000] hub 1-1:1.0: 4 ports detected [ 6.790000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 6.870000] random: procd urandom read with 12 bits of entropy available [ 7.010000] mount_root: loading kmods from internal overlay [ 7.160000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 7.300000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.320000] scsi host0: usb-storage 1-1.2:1.0 [ 7.330000] jffs2: notice: (329) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. [ 7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.360000] block: extroot: not configured [ 7.400000] jffs2: notice: (324) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. [ 7.520000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.540000] block: extroot: not configured [ 7.540000] mount_root: switching to jffs2 overlay [ 7.600000] procd: - early - [ 7.600000] procd: - watchdog - [ 8.320000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 8.520000] procd: - ubus - [ 8.870000] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 8.880000] sd 0:0:0:0: [sda] Write Protect is off [ 8.880000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 8.880000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.910000] sda: sda1 [ 8.920000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.540000] procd: - init - [ 13.440000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 13.450000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 13.600000] ath: EEPROM regdomain: 0x0 [ 13.600000] ath: EEPROM indicates default country code should be used [ 13.600000] ath: doing EEPROM country->regdmn map search [ 13.600000] ath: country maps to regdmn code: 0x3a [ 13.600000] ath: Country alpha2 being used: US [ 13.600000] ath: Regpair used: 0x3a [ 13.610000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.610000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 13.630000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 13.640000] usbcore: registered new interface driver ath9k_htc [ 13.770000] RPC: Registered named UNIX socket transport module. [ 13.770000] RPC: Registered udp transport module. [ 13.770000] RPC: Registered tcp transport module. [ 13.780000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.810000] tun: Universal TUN/TAP device driver, 1.6 [ 13.810000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 13.860000] usbcore: registered new interface driver rt2800usb [ 13.870000] usbcore: registered new interface driver rtl8187 [ 13.910000] usbcore: registered new interface driver rtl8192cu [ 13.970000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.990000] usbcore: registered new interface driver cdc_acm [ 13.990000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.020000] usbcore: registered new interface driver cdc_wdm [ 14.040000] nf_conntrack version 0.5.0 (955 buckets, 3820 max) [ 14.100000] usbcore: registered new interface driver ums-alauda [ 14.110000] usbcore: registered new interface driver ums-cypress [ 14.120000] usbcore: registered new interface driver ums-datafab [ 14.130000] usbcore: registered new interface driver ums-freecom [ 14.130000] usbcore: registered new interface driver ums-isd200 [ 14.140000] usbcore: registered new interface driver ums-jumpshot [ 14.150000] usbcore: registered new interface driver ums-karma [ 14.160000] usbcore: registered new interface driver ums-sddr09 [ 14.160000] usbcore: registered new interface driver ums-sddr55 [ 14.170000] usbcore: registered new interface driver ums-usbat [ 14.200000] usbcore: registered new interface driver usbserial [ 14.200000] usbcore: registered new interface driver usbserial_generic [ 14.210000] usbserial: USB Serial support registered for generic [ 14.260000] xt_time: kernel timezone is -0000 [ 14.270000] usbcore: registered new interface driver asix [ 14.280000] usbcore: registered new interface driver ax88179_178a [ 14.290000] usbcore: registered new interface driver cdc_ether [ 14.300000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.320000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 14.330000] usbcore: registered new interface driver pl2303 [ 14.340000] usbserial: USB Serial support registered for pl2303 [ 14.350000] PPP generic driver version 2.4.2 [ 14.360000] NET: Registered protocol family 24 [ 14.360000] usbcore: registered new interface driver qmi_wwan [ 14.370000] usbcore: registered new interface driver rndis_host [ 14.380000] usbcore: registered new interface driver sierra_net [ 14.400000] usbcore: registered new interface driver option [ 14.400000] usbserial: USB Serial support registered for GSM modem (1-port) [ 14.570000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 14.810000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 14.810000] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 14.820000] ath: EEPROM regdomain: 0x0 [ 14.820000] ath: EEPROM indicates default country code should be used [ 14.820000] ath: doing EEPROM country->regdmn map search [ 14.820000] ath: country maps to regdmn code: 0x3a [ 14.820000] ath: Country alpha2 being used: US [ 14.820000] ath: Regpair used: 0x3a [ 14.830000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 24.620000] device eth0 entered promiscuous mode [ 27.710000] random: nonblocking pool is initialized [ 30.330000] device wlan0 entered promiscuous mode [ 30.340000] br-lan: port 2(wlan0) entered forwarding state [ 30.340000] br-lan: port 2(wlan0) entered forwarding state [ 30.590000] br-lan: port 2(wlan0) entered disabled state [ 30.660000] br-lan: port 2(wlan0) entered forwarding state [ 30.660000] br-lan: port 2(wlan0) entered forwarding state [ 30.780000] device wlan0-1 entered promiscuous mode [ 30.780000] br-lan: port 3(wlan0-1) entered forwarding state [ 30.790000] br-lan: port 3(wlan0-1) entered forwarding state [ 31.620000] br-lan: port 3(wlan0-1) entered disabled state [ 32.660000] br-lan: port 2(wlan0) entered forwarding state [ 33.960000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.960000] br-lan: port 3(wlan0-1) entered forwarding state [ 35.300000] wlan1: authenticate with 60:38:e0:b4:0d:a1 [ 35.650000] wlan1: send auth to 60:38:e0:b4:0d:a1 (try 1/3) [ 35.680000] wlan1: authenticated [ 35.690000] wlan1: associate with 60:38:e0:b4:0d:a1 (try 1/3) [ 35.700000] wlan1: RX AssocResp from 60:38:e0:b4:0d:a1 (capab=0x411 status=0 aid=2) [ 35.720000] wlan1: associated [ 35.960000] br-lan: port 3(wlan0-1) entered forwarding state [ 36.300000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform [ 2160.460000] usb 1-1.3: USB disconnect, device number 5 [ 2163.280000] usb 1-1.3: new high-speed USB device number 6 using ehci-platform [ 2469.990000] wlan1: AP 60:38:e0:b4:0d:a1 changed bandwidth, new config is 2437 MHz, width 2 (2427/0 MHz) [ 3148.650000] usb 1-1.3: USB disconnect, device number 6 [ 3148.900000] usb 1-1.3: new high-speed USB device number 7 using ehci-platform [ 3149.040000] rndis_host 1-1.3:1.0 eth1: register 'rndis_host' at usb-ehci-platform-1.3, RNDIS device, 00:00:00:00:00:00 [ 3883.930000] usb 1-1.3: USB disconnect, device number 7 [ 3883.930000] rndis_host 1-1.3:1.0 eth1: unregister 'rndis_host' usb-ehci-platform-1.3, RNDIS device [ 3884.180000] usb 1-1.3: new high-speed USB device number 8 using ehci-platform [ 3885.210000] usb 1-1.3: USB disconnect, device number 8 [ 3885.490000] usb 1-1.3: new high-speed USB device number 9 using ehci-platform [ 3885.620000] rndis_host 1-1.3:1.0 eth1: register 'rndis_host' at usb-ehci-platform-1.3, RNDIS device, 00:00:00:00:00:00 [ 6325.820000] usb 1-1.3: USB disconnect, device number 9 [ 6325.820000] rndis_host 1-1.3:1.0 eth1: unregister 'rndis_host' usb-ehci-platform-1.3, RNDIS device [ 6326.130000] usb 1-1.3: new high-speed USB device number 10 using ehci-platform [ 6326.260000] rndis_host 1-1.3:1.0 eth1: register 'rndis_host' at usb-ehci-platform-1.3, RNDIS device, 00:00:00:00:00:00 [ 6341.690000] wlan1: AP 60:38:e0:b4:0d:a1 changed bandwidth, new config is 2437 MHz, width 1 (2437/0 MHz) [ 6383.680000] usb 1-1.3: USB disconnect, device number 10 [ 6383.680000] rndis_host 1-1.3:1.0 eth1: unregister 'rndis_host' usb-ehci-platform-1.3, RNDIS device [ 6383.990000] usb 1-1.3: new high-speed USB device number 11 using ehci-platform [ 6384.120000] rndis_host 1-1.3:1.0 eth1: register 'rndis_host' at usb-ehci-platform-1.3, RNDIS device, 00:00:00:00:00:00 root@Pineapple:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.55.181.207 0.0.0.0 UG 0 0 0 wlan1 10.55.181.0 * 255.255.255.0 U 0 0 0 wlan1 10.55.181.207 * 255.255.255.255 UH 0 0 0 wlan1 172.16.42.0 * 255.255.255.0 U 0 0 0 br-lan root@Pineapple:~# Link to comment Share on other sites More sharing options...
Rkiver Posted September 10, 2018 Share Posted September 10, 2018 https://forums.hak5.org/topic/28600-do-not-post-wifi-pineapple-related-questions-here/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.