Jump to content

PMKID Attack on WiFi Pineapples


Zylla
 Share

Recommended Posts

3 hours ago, Arch said:

Looks like its not finding the dump tool.

root@Pineapple:~# find / -name hcxdumptool
root@Pineapple:~#

 

I'm usually doing testing on my Tetra, as it's easier and faster to work on. But luckily i have a Nano as well.

So i tried testing the latest version of hcxdumptool on my Nano. No problems. Works flawlessly.
(Screenshot below)

Screenshot_1.png

Link to comment
Share on other sites

2 hours ago, Ph@nt0m said:

Zylla did you ever get the items needed to keep helping the community?  You had mentioned your motherboard was done. 

Hi ph@ntom! ?

No. Sadly I haven't gotten it yet. I've managed to keep the tool updated with the original source-code, whenever it changes. But some work (like coding for the Module) is not possible for me at the moment. I hope to get back on track as soon as possible. ?

Link to comment
Share on other sites

15 minutes ago, Arch said:

Hi Zylla,

I was able to get hcxdumptool working on my NANO.  I installed it onto my Tetra but whenever I run it, my TETRA immediately reboots itself.  What logs should I pull to send to you to help diagnose.

Thanks for the help!

That doesn't sound to good. What command exactly do you run that causes it to reboot? ?

Link to comment
Share on other sites

On 9/27/2018 at 6:27 AM, Zylla said:

Hi ph@ntom! ?

No. Sadly I haven't gotten it yet. I've managed to keep the tool updated with the original source-code, whenever it changes. But some work (like coding for the Module) is not possible for me at the moment. I hope to get back on track as soon as possible. ?

What would be a major help for you to be able to work?

Link to comment
Share on other sites

1 hour ago, Arch said:

hcxdumptool -i wlan1 -o test.pcapng --enable_status 3

 

Strange. Same command works perfectly for me.
I usually start by setting the interface into monitor-mode before running hcxdumptool. But it should also work without doing it (It will set it to monitor mode by itself)
I tested the same command on my Tetra, running the latest version of hcxdumptool, and no issues.

Are you having issues with your Tetra when doing other things as well?
I've seen some people having identical issues when doing other stuff, like running PineAP, etc.

Link to comment
Share on other sites

I've updated both tools, and fixed the links in the first post.
Also: @Bigbiz asked how to use this on his linux machine.
You need to download the original source-code for hcxdumptool and hcxtools, and then compile it. (Make sure you have the necessary dependencies installed)

Link to comment
Share on other sites

17 hours ago, Zylla said:

Strange. Same command works perfectly for me.
I usually start by setting the interface into monitor-mode before running hcxdumptool. But it should also work without doing it (It will set it to monitor mode by itself)
I tested the same command on my Tetra, running the latest version of hcxdumptool, and no issues.

Are you having issues with your Tetra when doing other things as well?
I've seen some people having identical issues when doing other stuff, like running PineAP, etc.

I turned everything off, rebooted the Tetra, put wlan1 in monitor mode then ran hcxdumptool.

It worked for about 1-2 seconds then crashed.  Given that it runs on my Nano I think this is an issue on the Tetra.

I plugged in my Alpha adapter and it worked when I used the alpha adapter.  Guess I need to contact support.

 

Thanks for the help.

 

 

Link to comment
Share on other sites

13 hours ago, Zylla said:

I've updated both tools, and fixed the links in the first post.
Also: @Bigbiz asked how to use this on his linux machine.
You need to download the original source-code for hcxdumptool and hcxtools, and then compile it. (Make sure you have the necessary dependencies installed)

This now supports GPSd, I wonder which gps dongle would work with the pineapple and who could update the PMKID module rto display the gps location of each pwned network :)

Link to comment
Share on other sites

Bus error is back.

I've used the latest compilation as of the version available today.

Im using a Nano. Copy it to tmp and I get the same error.

root@Pineapple:/sd/hcx# hcxpcaptool -z test.16800 test.pcapng
Bus error
root@Pineapple:/sd/hcx#
root@Pineapple:/sd/hcx# dmesg
[    0.000000] Linux version 3.18.84 (@334b530f4154) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #216 Tue Aug 21 02:21:42 UTC 2018
[    0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=PINEAPPLE-NANO  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is WiFi Pineapple NANO
[    0.380000] Switched to clocksource MIPS
[    0.380000] NET: Registered protocol family 2
[    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.400000] TCP: reno registered
[    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.420000] NET: Registered protocol family 1
[    0.420000] PCI: CLS 0 bytes, default 32
[    0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.450000] msgmni has been set to 118
[    0.460000] io scheduler noop registered
[    0.460000] io scheduler deadline registered (default)
[    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.480000] console [ttyATH0] enabled
[    0.490000] bootconsole [early0] disabled
[    0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[    0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.520000] 5 tp-link partitions found on MTD device spi0.0
[    0.520000] Creating 5 MTD partitions on "spi0.0":
[    0.520000] 0x000000000000-0x000000020000 : "u-boot"
[    0.530000] 0x000000020000-0x00000013af78 : "kernel"
[    0.540000] 0x00000013af78-0x000000ff0000 : "rootfs"
[    0.540000] mtd: device 2 (rootfs) set to be root filesystem
[    0.540000] 1 squashfs-split partitions found on MTD device rootfs
[    0.550000] 0x000000d80000-0x000000ff0000 : "rootfs_data"
[    0.560000] 0x000000ff0000-0x000001000000 : "art"
[    0.560000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.200000] TCP: cubic registered
[    1.200000] NET: Registered protocol family 17
[    1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.220000] 8021q: 802.1Q VLAN Support v1.8
[    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.240000] Freeing unused kernel memory: 240K
[    2.780000] init: Console is alive
[    2.780000] init: - watchdog -
[    5.440000] usbcore: registered new interface driver usbfs
[    5.440000] usbcore: registered new interface driver hub
[    5.450000] usbcore: registered new device driver usb
[    5.510000] SCSI subsystem initialized
[    5.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.520000] ehci-platform: EHCI generic platform driver
[    5.530000] ehci-platform ehci-platform: EHCI Host Controller
[    5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.570000] hub 1-0:1.0: USB hub found
[    5.570000] hub 1-0:1.0: 1 port detected
[    5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.590000] ohci-platform: OHCI generic platform driver
[    5.590000] uhci_hcd: USB Universal Host Controller Interface driver
[    5.610000] usbcore: registered new interface driver usb-storage
[    5.850000] init: - preinit -
[    5.970000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.410000] hub 1-1:1.0: USB hub found
[    6.430000] hub 1-1:1.0: 4 ports detected
[    6.590000] random: procd urandom read with 11 bits of entropy available
[    6.840000] mount_root: loading kmods from internal overlay
[    6.880000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    7.150000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.160000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    7.180000] block: extroot: not configured
[    7.220000] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    7.360000] block: extroot: not configured
[    7.360000] mount_root: switching to jffs2 overlay
[    7.420000] procd: - early -
[    7.420000] procd: - watchdog -
[    8.340000] procd: - ubus -
[    9.350000] procd: - init -
[   11.960000] usb 1-1.1: device descriptor read/64, error -145
[   12.320000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[   12.460000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   12.480000] scsi host0: usb-storage 1-1.2:1.0
[   13.650000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
[   13.730000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   13.730000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   13.980000] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[   13.980000] sd 0:0:0:0: [sda] Write Protect is off
[   13.990000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
[   13.990000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   14.010000]  sda: sda1
[   14.020000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   14.260000] ath: EEPROM regdomain: 0x0
[   14.260000] ath: EEPROM indicates default country code should be used
[   14.260000] ath: doing EEPROM country->regdmn map search
[   14.260000] ath: country maps to regdmn code: 0x3a
[   14.260000] ath: Country alpha2 being used: US
[   14.260000] ath: Regpair used: 0x3a
[   14.270000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.270000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   14.410000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   14.420000] usbcore: registered new interface driver ath9k_htc
[   14.580000] RPC: Registered named UNIX socket transport module.
[   14.580000] RPC: Registered udp transport module.
[   14.580000] RPC: Registered tcp transport module.
[   14.590000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.620000] tun: Universal TUN/TAP device driver, 1.6
[   14.620000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   14.670000] usbcore: registered new interface driver rt2800usb
[   14.700000] usbcore: registered new interface driver rtl8187
[   14.760000] usbcore: registered new interface driver rtl8192cu
[   14.810000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.840000] usbcore: registered new interface driver cdc_acm
[   14.840000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.850000] usbcore: registered new interface driver cdc_wdm
[   14.870000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[   14.930000] usbcore: registered new interface driver ums-alauda
[   14.950000] usbcore: registered new interface driver ums-cypress
[   14.960000] usbcore: registered new interface driver ums-datafab
[   14.970000] usbcore: registered new interface driver ums-freecom
[   14.970000] usbcore: registered new interface driver ums-isd200
[   14.980000] usbcore: registered new interface driver ums-jumpshot
[   14.990000] usbcore: registered new interface driver ums-karma
[   15.000000] usbcore: registered new interface driver ums-sddr09
[   15.010000] usbcore: registered new interface driver ums-sddr55
[   15.020000] usbcore: registered new interface driver ums-usbat
[   15.060000] usbcore: registered new interface driver usbserial
[   15.070000] usbcore: registered new interface driver usbserial_generic
[   15.070000] usbserial: USB Serial support registered for generic
[   15.130000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   15.190000] xt_time: kernel timezone is -0000
[   15.190000] usbcore: registered new interface driver asix
[   15.200000] usbcore: registered new interface driver ax88179_178a
[   15.210000] usbcore: registered new interface driver cdc_ether
[   15.230000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.270000] usbcore: registered new interface driver pl2303
[   15.280000] usbserial: USB Serial support registered for pl2303
[   15.290000] PPP generic driver version 2.4.2
[   15.300000] NET: Registered protocol family 24
[   15.300000] usbcore: registered new interface driver qmi_wwan
[   15.310000] usbcore: registered new interface driver rndis_host
[   15.320000] usbcore: registered new interface driver sierra_net
[   15.350000] usbcore: registered new interface driver option
[   15.350000] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.390000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[   15.660000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
[   15.660000] ath9k_htc 1-1.1:1.0: FW RMW support: On
[   15.660000] ath: EEPROM regdomain: 0x0
[   15.660000] ath: EEPROM indicates default country code should be used
[   15.660000] ath: doing EEPROM country->regdmn map search
[   15.660000] ath: country maps to regdmn code: 0x3a
[   15.660000] ath: Country alpha2 being used: US
[   15.660000] ath: Regpair used: 0x3a
[   15.680000] ieee80211 phy1: Atheros AR9271 Rev:1
[   17.830000] usb 1-1.2: USB disconnect, device number 4
[   17.830000] scsi 0:0:0:0: rejecting I/O to offline device
[   17.830000] scsi 0:0:0:0: [sda] killing request
[   17.840000] scsi 0:0:0:0: [sda]  
[   17.840000] Result: hostbyte=0x01 driverbyte=0x00
[   17.850000] scsi 0:0:0:0: [sda] CDB:
[   17.850000] cdb[0]=0x28: 28 00 00 00 97 20 00 00 20 00
[   17.860000] blk_update_request: I/O error, dev sda, sector 38688
[   17.860000] Buffer I/O error on dev sda1, logical block 3812, async page read
[   17.870000] Buffer I/O error on dev sda1, logical block 4, async page read
[   17.890000] Buffer I/O error on dev sda1, logical block 0, async page read
[   20.490000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
[   20.610000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   20.640000] scsi host1: usb-storage 1-1.2:1.0
[   21.640000] scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
[   21.640000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   21.940000] sd 1:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[   21.980000] sd 1:0:0:0: [sda] Write Protect is off
[   21.980000] sd 1:0:0:0: [sda] Mode Sense: 21 00 00 00
[   21.980000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   22.050000]  sda: sda1
[   22.060000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   24.370000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   27.000000] random: nonblocking pool is initialized
[   27.180000] device eth0 entered promiscuous mode
[   29.930000] eth0: link up (100Mbps/Full duplex)
[   29.950000] br-lan: port 1(eth0) entered forwarding state
[   29.950000] br-lan: port 1(eth0) entered forwarding state
[   31.950000] br-lan: port 1(eth0) entered forwarding state
[   33.100000] device wlan0 entered promiscuous mode
[   33.390000] br-lan: port 2(wlan0) entered forwarding state
[   33.390000] br-lan: port 2(wlan0) entered forwarding state
[   33.450000] device wlan0-1 entered promiscuous mode
[   33.460000] br-lan: port 3(wlan0-1) entered forwarding state
[   33.460000] br-lan: port 3(wlan0-1) entered forwarding state
[   34.210000] br-lan: port 3(wlan0-1) entered disabled state
[   34.220000] eth0: link down
[   35.210000] br-lan: port 1(eth0) entered disabled state
[   35.220000] eth0: link up (100Mbps/Full duplex)
[   35.220000] br-lan: port 1(eth0) entered forwarding state
[   35.230000] br-lan: port 1(eth0) entered forwarding state
[   35.390000] br-lan: port 2(wlan0) entered forwarding state
[   36.540000] br-lan: port 3(wlan0-1) entered forwarding state
[   36.550000] br-lan: port 3(wlan0-1) entered forwarding state
[   37.230000] br-lan: port 1(eth0) entered forwarding state
[   38.550000] br-lan: port 3(wlan0-1) entered forwarding state
root@Pineapple:/sd/hcx#

 

Link to comment
Share on other sites

2 minutes ago, skylark said:

Bus error is back.

I've used the latest compilation as of the version available today.

Im using a Nano. Copy it to tmp and I get the same error.

root@Pineapple:/sd/hcx# hcxpcaptool -z test.16800 test.pcapng
Bus error
root@Pineapple:/sd/hcx#
root@Pineapple:/sd/hcx# dmesg
[    0.000000] Linux version 3.18.84 (@334b530f4154) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #216 Tue Aug 21 02:21:42 UTC 2018
[    0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=PINEAPPLE-NANO  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is WiFi Pineapple NANO
[    0.380000] Switched to clocksource MIPS
[    0.380000] NET: Registered protocol family 2
[    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.400000] TCP: reno registered
[    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.420000] NET: Registered protocol family 1
[    0.420000] PCI: CLS 0 bytes, default 32
[    0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.450000] msgmni has been set to 118
[    0.460000] io scheduler noop registered
[    0.460000] io scheduler deadline registered (default)
[    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.480000] console [ttyATH0] enabled
[    0.490000] bootconsole [early0] disabled
[    0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80
[    0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
[    0.520000] 5 tp-link partitions found on MTD device spi0.0
[    0.520000] Creating 5 MTD partitions on "spi0.0":
[    0.520000] 0x000000000000-0x000000020000 : "u-boot"
[    0.530000] 0x000000020000-0x00000013af78 : "kernel"
[    0.540000] 0x00000013af78-0x000000ff0000 : "rootfs"
[    0.540000] mtd: device 2 (rootfs) set to be root filesystem
[    0.540000] 1 squashfs-split partitions found on MTD device rootfs
[    0.550000] 0x000000d80000-0x000000ff0000 : "rootfs_data"
[    0.560000] 0x000000ff0000-0x000001000000 : "art"
[    0.560000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.590000] libphy: ag71xx_mdio: probed
[    1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.200000] TCP: cubic registered
[    1.200000] NET: Registered protocol family 17
[    1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.220000] 8021q: 802.1Q VLAN Support v1.8
[    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.240000] Freeing unused kernel memory: 240K
[    2.780000] init: Console is alive
[    2.780000] init: - watchdog -
[    5.440000] usbcore: registered new interface driver usbfs
[    5.440000] usbcore: registered new interface driver hub
[    5.450000] usbcore: registered new device driver usb
[    5.510000] SCSI subsystem initialized
[    5.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.520000] ehci-platform: EHCI generic platform driver
[    5.530000] ehci-platform ehci-platform: EHCI Host Controller
[    5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.570000] hub 1-0:1.0: USB hub found
[    5.570000] hub 1-0:1.0: 1 port detected
[    5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.590000] ohci-platform: OHCI generic platform driver
[    5.590000] uhci_hcd: USB Universal Host Controller Interface driver
[    5.610000] usbcore: registered new interface driver usb-storage
[    5.850000] init: - preinit -
[    5.970000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.410000] hub 1-1:1.0: USB hub found
[    6.430000] hub 1-1:1.0: 4 ports detected
[    6.590000] random: procd urandom read with 11 bits of entropy available
[    6.840000] mount_root: loading kmods from internal overlay
[    6.880000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    7.150000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.160000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    7.180000] block: extroot: not configured
[    7.220000] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[    7.360000] block: extroot: not configured
[    7.360000] mount_root: switching to jffs2 overlay
[    7.420000] procd: - early -
[    7.420000] procd: - watchdog -
[    8.340000] procd: - ubus -
[    9.350000] procd: - init -
[   11.960000] usb 1-1.1: device descriptor read/64, error -145
[   12.320000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
[   12.460000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   12.480000] scsi host0: usb-storage 1-1.2:1.0
[   13.650000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
[   13.730000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   13.730000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   13.980000] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[   13.980000] sd 0:0:0:0: [sda] Write Protect is off
[   13.990000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
[   13.990000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   14.010000]  sda: sda1
[   14.020000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   14.260000] ath: EEPROM regdomain: 0x0
[   14.260000] ath: EEPROM indicates default country code should be used
[   14.260000] ath: doing EEPROM country->regdmn map search
[   14.260000] ath: country maps to regdmn code: 0x3a
[   14.260000] ath: Country alpha2 being used: US
[   14.260000] ath: Regpair used: 0x3a
[   14.270000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.270000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   14.410000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   14.420000] usbcore: registered new interface driver ath9k_htc
[   14.580000] RPC: Registered named UNIX socket transport module.
[   14.580000] RPC: Registered udp transport module.
[   14.580000] RPC: Registered tcp transport module.
[   14.590000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.620000] tun: Universal TUN/TAP device driver, 1.6
[   14.620000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   14.670000] usbcore: registered new interface driver rt2800usb
[   14.700000] usbcore: registered new interface driver rtl8187
[   14.760000] usbcore: registered new interface driver rtl8192cu
[   14.810000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.840000] usbcore: registered new interface driver cdc_acm
[   14.840000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.850000] usbcore: registered new interface driver cdc_wdm
[   14.870000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[   14.930000] usbcore: registered new interface driver ums-alauda
[   14.950000] usbcore: registered new interface driver ums-cypress
[   14.960000] usbcore: registered new interface driver ums-datafab
[   14.970000] usbcore: registered new interface driver ums-freecom
[   14.970000] usbcore: registered new interface driver ums-isd200
[   14.980000] usbcore: registered new interface driver ums-jumpshot
[   14.990000] usbcore: registered new interface driver ums-karma
[   15.000000] usbcore: registered new interface driver ums-sddr09
[   15.010000] usbcore: registered new interface driver ums-sddr55
[   15.020000] usbcore: registered new interface driver ums-usbat
[   15.060000] usbcore: registered new interface driver usbserial
[   15.070000] usbcore: registered new interface driver usbserial_generic
[   15.070000] usbserial: USB Serial support registered for generic
[   15.130000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   15.190000] xt_time: kernel timezone is -0000
[   15.190000] usbcore: registered new interface driver asix
[   15.200000] usbcore: registered new interface driver ax88179_178a
[   15.210000] usbcore: registered new interface driver cdc_ether
[   15.230000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.270000] usbcore: registered new interface driver pl2303
[   15.280000] usbserial: USB Serial support registered for pl2303
[   15.290000] PPP generic driver version 2.4.2
[   15.300000] NET: Registered protocol family 24
[   15.300000] usbcore: registered new interface driver qmi_wwan
[   15.310000] usbcore: registered new interface driver rndis_host
[   15.320000] usbcore: registered new interface driver sierra_net
[   15.350000] usbcore: registered new interface driver option
[   15.350000] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.390000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[   15.660000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
[   15.660000] ath9k_htc 1-1.1:1.0: FW RMW support: On
[   15.660000] ath: EEPROM regdomain: 0x0
[   15.660000] ath: EEPROM indicates default country code should be used
[   15.660000] ath: doing EEPROM country->regdmn map search
[   15.660000] ath: country maps to regdmn code: 0x3a
[   15.660000] ath: Country alpha2 being used: US
[   15.660000] ath: Regpair used: 0x3a
[   15.680000] ieee80211 phy1: Atheros AR9271 Rev:1
[   17.830000] usb 1-1.2: USB disconnect, device number 4
[   17.830000] scsi 0:0:0:0: rejecting I/O to offline device
[   17.830000] scsi 0:0:0:0: [sda] killing request
[   17.840000] scsi 0:0:0:0: [sda]  
[   17.840000] Result: hostbyte=0x01 driverbyte=0x00
[   17.850000] scsi 0:0:0:0: [sda] CDB:
[   17.850000] cdb[0]=0x28: 28 00 00 00 97 20 00 00 20 00
[   17.860000] blk_update_request: I/O error, dev sda, sector 38688
[   17.860000] Buffer I/O error on dev sda1, logical block 3812, async page read
[   17.870000] Buffer I/O error on dev sda1, logical block 4, async page read
[   17.890000] Buffer I/O error on dev sda1, logical block 0, async page read
[   20.490000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
[   20.610000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   20.640000] scsi host1: usb-storage 1-1.2:1.0
[   21.640000] scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
[   21.640000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   21.940000] sd 1:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[   21.980000] sd 1:0:0:0: [sda] Write Protect is off
[   21.980000] sd 1:0:0:0: [sda] Mode Sense: 21 00 00 00
[   21.980000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   22.050000]  sda: sda1
[   22.060000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   24.370000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   27.000000] random: nonblocking pool is initialized
[   27.180000] device eth0 entered promiscuous mode
[   29.930000] eth0: link up (100Mbps/Full duplex)
[   29.950000] br-lan: port 1(eth0) entered forwarding state
[   29.950000] br-lan: port 1(eth0) entered forwarding state
[   31.950000] br-lan: port 1(eth0) entered forwarding state
[   33.100000] device wlan0 entered promiscuous mode
[   33.390000] br-lan: port 2(wlan0) entered forwarding state
[   33.390000] br-lan: port 2(wlan0) entered forwarding state
[   33.450000] device wlan0-1 entered promiscuous mode
[   33.460000] br-lan: port 3(wlan0-1) entered forwarding state
[   33.460000] br-lan: port 3(wlan0-1) entered forwarding state
[   34.210000] br-lan: port 3(wlan0-1) entered disabled state
[   34.220000] eth0: link down
[   35.210000] br-lan: port 1(eth0) entered disabled state
[   35.220000] eth0: link up (100Mbps/Full duplex)
[   35.220000] br-lan: port 1(eth0) entered forwarding state
[   35.230000] br-lan: port 1(eth0) entered forwarding state
[   35.390000] br-lan: port 2(wlan0) entered forwarding state
[   36.540000] br-lan: port 3(wlan0-1) entered forwarding state
[   36.550000] br-lan: port 3(wlan0-1) entered forwarding state
[   37.230000] br-lan: port 1(eth0) entered forwarding state
[   38.550000] br-lan: port 3(wlan0-1) entered forwarding state
root@Pineapple:/sd/hcx#

 

Correction - when I try to copy it to /tmp I get the same error

Link to comment
Share on other sites

Idont know but all 3 downloads are stopped at "waiting for network" for the last 5min . My connection is good. Ill try again later.

Disregard it was the path i had set my downloads. Folder was full.

Edited by Bigbiz
Link to comment
Share on other sites

16 hours ago, skylark said:

OK,

Just now, I updated Nano firmware to 2.4 and re-downloaded and reinstalled both hcxdumptool and hcxtools.

I've used the dumptool to capture PMKIDs without a problem, but when using hcxpcaptool it is still throwing a bus error.

I'll look into it asap. 

Link to comment
Share on other sites

Both tools have been updated to follow changes from upstream. We're now at version "16".
I've also fixed the "Bus error" message on hcxpcaptool. (Thank @skylark for reporting it)
Everything should now work perfectly. ?

Please let me know about any issues, and i'll look into them asap. ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...