flyingspider Posted August 18, 2018 Share Posted August 18, 2018 I am newbie to Tetra and just got it yesterday. Everything was okay till I uploaded the new upgrade version "2.2.0.bin". I waited for 30 mins and looks like it did not upgraded. Now the yellow light is solid and I cannot access the webpage http://172.16.42.1:1471. Nor I can ssh. My router ip is 192.168x and setup eth1 manually. I can ping but nothing happens beyond that. I looked at the forum people are asking to do firmware recovery but not sure how to do it. I tried to reset to factory settings nothing happens either. Any help would be appreciated. Thanks in advance! Link to comment Share on other sites More sharing options...
Just_a_User Posted August 18, 2018 Share Posted August 18, 2018 7 hours ago, flyingspider said: I tried to reset to factory settings nothing happens either. Any help would be appreciated. I would try and do a firmware recovery - https://www.wifipineapple.com/pages/faq Hopefully you can still get into the uboot recovery to reflash the FACTORY version of firmware then upgrade it to the latest. Link to comment Share on other sites More sharing options...
L07TB0Y Posted August 18, 2018 Share Posted August 18, 2018 Make sure to use Recovery firmware from the link above. make sure to press and hold the reset and plug the usb to eth0 make sure you are using two usb ports and than use the recovery firmware from the above link any other firmware will not work. you will also have to manually change your computers ip to 192.168.1.2 and connect to 192.168.1.1 to do the recovery Link to comment Share on other sites More sharing options...
flyingspider Posted August 23, 2018 Author Share Posted August 23, 2018 Hi, I did exactly what you said. I was able to reach to the ip and upload the tetra_factory.bin. But still no luck, tried couple of times. even after 24 hours wait, its still in process and never reboot and have solid light. Any help appreciated! Link to comment Share on other sites More sharing options...
L07TB0Y Posted August 24, 2018 Share Posted August 24, 2018 just making sure if you are doing this final step Reset the the WiFi Pineapple facing USB Ethernet interface back to DHCP or 172.16.42.42 with netmask 255.255.255.0 Link to comment Share on other sites More sharing options...
flyingspider Posted August 27, 2018 Author Share Posted August 27, 2018 Yes, I did. But the yellow light is still solid. I recycled the power too. Not able to get to http://172.16.42.1:1471 Am I missing something or the device is broken? Thanks for your help! Link to comment Share on other sites More sharing options...
CyberDrifter Posted December 21, 2018 Share Posted December 21, 2018 I have exactly the same... did you found an answer Flyingspider? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.