Aupajo Posted March 20, 2006 Share Posted March 20, 2006 Scenario: ---------------------- - iBook G4, running a webserver - iBook is connected to an Airport - Airport is connected to a DLink router Goal: --------------------- - Run webserver to the outside world Gah! I've tried every trick, tutorial, etc. it just won't work! Anyone got any advice on how to do this? Quote Link to comment Share on other sites More sharing options...
VaKo Posted March 20, 2006 Share Posted March 20, 2006 Not to sure about airport (never used one) but that just means i shout louder. What gives you the IP address for the iBook? The D-Link or the Airport? First step is give your iBook a static IP address, then in the D-Link, forward "port 80" to "port 80" of the Airport modual, and then forward "port 80" again with the Airport to your iBooks static IP. This should work. But why have a web server running on a notebook via wireless? Much easyer to just get hold of an old PC, cable it in to the D-Link, bung *nix on it, and hide it somewhere out the way. Quote Link to comment Share on other sites More sharing options...
Aupajo Posted March 26, 2006 Author Share Posted March 26, 2006 IP of the iBook -> Airport I'll give it a shot and see if it works, thx. The webserver's so I can develop php. Not designed to be dedicated. Quote Link to comment Share on other sites More sharing options...
Aupajo Posted March 26, 2006 Author Share Posted March 26, 2006 Yeah, it didn't work. That's pretty much what I tried before. I'm pretty suire the problem's with the Airport. Quote Link to comment Share on other sites More sharing options...
mubix Posted March 26, 2006 Share Posted March 26, 2006 Is port forwading enabled on the Airport? Quote Link to comment Share on other sites More sharing options...
Faith +1 Posted March 26, 2006 Share Posted March 26, 2006 Is port forwading enabled on the Airport? To expand on this - What port do you want it to be? 80 or something else thats obscure? I am not patronizing you but does the Dlink have port forwarding to the Airport? If so then do you have the port mapping defined on the Airport (Just like Mubix asked)? If so then do it again from start to finish. You can check out this guide to help - http://www.gamesmith.biz/router.html#airport http://www.gamesmith.biz/router.html and check this site to see if your port that you define is actually "Open" which is RED for bad. https://www.grc.com/x/ne.dll?bh0bkyd2 Go down to the bottom and click proceed if you agree to their terms. Then use the "Custom port probe" put in your port and click custom port probe again. If you FAILED - that means you are now live on the internet on that port. If you "Succeeded" then your machine didnt respond to the "request." Hope this helps. Quote Link to comment Share on other sites More sharing options...
VaKo Posted March 26, 2006 Share Posted March 26, 2006 http://www.portforward.com/ slightly off topic, but this site has to be the daddy of port forwarding resources. Quote Link to comment Share on other sites More sharing options...
Faith +1 Posted March 26, 2006 Share Posted March 26, 2006 http://www.portforward.com/slightly off topic, but this site has to be the daddy of port forwarding resources. It is :-) Best resource out there and its always done well for tutorials.. if... they had them. If they didnt, then you were kinda screwed and had to go to the manufacturers website to figure it out for your friend over the net :-p Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.