Jump to content
Marzster

Wifi Pineapple Nano - Kali Linux won't connect

Recommended Posts

Hey

Got my new NaNo. download .wp6.sh and ran it. all settings seem fine, but won't connect, just get a screen of full stops.

Running on kali-linux-2018.1-vbox-amd64

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 08:00:27:59:1b:51  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.16.42.42  netmask 255.255.255.0  broadcast 172.16.42.255
        inet6 fe80::a00:27ff:feb8:d99f  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:b8:d9:9f  txqueuelen 1000  (Ethernet)
        RX packets 4  bytes 930 (930.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 22  bytes 1855 (1.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 20  bytes 1116 (1.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 20  bytes 1116 (1.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
 

then when try to connect, its full stops

Step 3 of 3: Select WiFi Pineapple Interface
    Please connect the WiFi Pineapple to this computer.
    ...................................................
    ...................................................
    ...................................................
    .....................

Cannot connect through web interface either

Unable to connect

Firefox can’t establish a connection to the server at 172.16.42.1:1471.

    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer’s network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Any one else encounter this, or any advice.

Share this post


Link to post
Share on other sites

If you reboot kali and restart the Nano, can you connect without running the wp6.sh script? 

Share this post


Link to post
Share on other sites

 that doesn't work, I can't even ping the nano. But when connected the light goes solid blue. I cannot ping from Kali or even the MAC terminal.

 

Contacted help desk, they just said install USB on Kali, which I already have, I told them it is installed, issue seems to be hardware as I can't even Ping the box.

I guess they get many people with issues and think NOOBS. But my friend has a nano and worked for him out of box and he had a looked and said all setup correctly should work.

Share this post


Link to post
Share on other sites
16 minutes ago, Marzster said:

 that doesn't work, I can't even ping the nano. But when connected the light goes solid blue. I cannot ping from Kali or even the MAC terminal.

Are you running this in a VM? have you tried from the hostOS directly? just to rule out VM/USB sharing issues.

Edited by Just_a_User

Share this post


Link to post
Share on other sites

If the wp6.sh program asks you to connect your Wifi Pineapple to your computer, disconnect your Wifi Pineapple with the USB menu in your VM and then after 2 seconds connect it back.

Share this post


Link to post
Share on other sites

Same problems here, tried all the so called, fixes, workarounds, ip table fixes debian 9 sharing blog fixes, kali linux fixes; attempted this on Parrot Security, Debian 9, fresh install of kali linux, wont waste any more time attempting on a windows box. I have a device I cant even use as a paperweight. Reset the device to factory tried again and no dice. Its apparently just dumb luck if you buy one and it actually works. I'll go back to using usb adapters and wifi pumpkin. this has been a complete waste of time and effort on a device which is quite short of the mark.. will no longer connect through android either. simply seems if its configured on one platform it won't operate with the other. this is not a plug and play or configurable device, its just a 50% shot in the dark. worst thing I've ever encountered

Share this post


Link to post
Share on other sites
1 hour ago, Domain0@engineer.com said:

this is not a plug and play or configurable device, its just a 50% shot in the dark

Not true, what have you tried? how can i help you?

On 5/25/2018 at 9:03 PM, Zech15 said:

I am having the same problem have you found a fix??

What issues are you having? what have you tried? How can i help?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...