Jump to content
awerqo

WiFi Pineapple Recon Bug

Recommended Posts

Hello! Sorry for my bad english.

Device: Wifi Pineapple nano, Firmware Version: 2.0.2

I found very interesting bug - when near you pineapple have Non-RFC WiFi network name (for examle my neighbor  called his WiFi:  "LENOVO-ПК_Network",  ПК - it's Russian symbols) and near this network recon can't find nothing. Also if you go to Networking -> WiFi Client Mode -> scan you will show all networks us "undefined". PineAP also work incorrectly near this place.

Do you now how i can fix it? In my country i often see native symbols in WiFi network name.

 

 

Share this post


Link to post
Share on other sites
1 hour ago, awerqo said:

Do you now how i can fix it? In my country i often see native symbols in WiFi network name.

Interesting, from ssh terminal - can you see output from airodump-ng?

  • Like 1

Share this post


Link to post
Share on other sites

After i typing "airodump-ng wlan0" i see this, and after finding Network with Russian symbols i got connection error. 

 

CH 13 ][ Elapsed: 0 s ][ 2018-03-04 17:06

 BSSID              PWR  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID

 C0:4A:00:97:92:06  -78        7        0    0  11  54e. WPA2 CCMP   PSK  LENOVO-▒▒_Network
 00:0E:8F:8D:1C:88  -59        8        1    0  11  54e  WPA2 CCMP   PSK  snypi
 B4:A5:EF:3B:16:B4  -81        8        0    0  11  54e  WPA2 CCMP   PSK  Beeline_2G_F3F233
 00:1E:E5:71:0A:96  -71        9        0    0  11  54   WPA2 CCMP   PSK  kasakoff
 00:0E:8F:8D:1C:8A  -59        9        0    0  11  54e  OPN              Smart_box-8D1C88_guest

 BSSID              STATION            PWR   Rate    Lost    Frames  Probe

 (not associated)   BE:D1:CA:4B:60:23  -86    0 - 1      0        1
 (not associated)   00:1C:26:8A:A4:09  -68    0 - 1      0        6  iPhone ion,PrivateNetwork2,MyWiFi,Sherman

7492120db6d6e8b0327fbae99e198fd2.png


 

Share this post


Link to post
Share on other sites

I do some experimets for get more information.

If i running airodump ng on pineapple connection always crashing after finding ""LENOVO-ПК_Network" network. I can reconnect only after 1 minute.

I try do airodump ng on Kali linux + AWUS036HNA in same place  - it works fine,  this network with Russian symbols looks some incorectly, but it doesn't hinders. 

 

a7f9e4d09160b4db02231dcf298388e8.png

Share this post


Link to post
Share on other sites

I've noticed a bug as well, Present in the 2.0.2 firmware. I notice that WLAN1 doesn't come up when you boot the device with the Y-cable and a power bank, connected to my smartphone for ics. I use the app, usb tether, connect to the pineapple, and Recon doesn't function, and i can't search for access points to connect to under networking. until i reboot without the y-cable / smartphone connected THEN >> wlan1 is avail. Can re-produce this 100% @Sebkinne

Edited by UnLo

Share this post


Link to post
Share on other sites
On 3/25/2018 at 2:36 PM, UnLo said:

I've noticed a bug as well, Present in the 2.0.2 firmware. I notice that WLAN1 doesn't come up when you boot the device with the Y-cable and a power bank, connected to my smartphone for ics. I use the app, usb tether, connect to the pineapple, and Recon doesn't function, and i can't search for access points to connect to under networking. until i reboot without the y-cable / smartphone connected THEN >> wlan1 is avail. Can re-produce this 100% @Sebkinne

Then you aren't providing enough power to the WiFi Pineapple to fully initialize all components. The Y-cable just allows you to easily provide more power. 

 

  • Upvote 1

Share this post


Link to post
Share on other sites
54 minutes ago, Sebkinne said:

Then you aren't providing enough power to the WiFi Pineapple to fully initialize all components. The Y-cable just allows you to easily provide more power. 

 

That's odd. I used the exact same power bank on 1.1.3 with the same y cable and did not have the same issue. I know this because I have only one power bank. I will investigate further. Thank you for the quick reply. I have not tried booting plugged into just the power bank only without the y cable attached. Perhaps with the phone attached it is drawing too much as you said to initiate everything. I hadn't considered that. 

Edited by UnLo

Share this post


Link to post
Share on other sites
2 hours ago, awerqo said:

Is there any progress with the development of a new firmware version?

Yeah, we are on RC1 right now, just ironing out a few kinks :) 

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...