Jump to content

Diodamic - HoppEye port to PS


Recommended Posts

Hoi!

Now, before everyone goes raging on about me copying HoppEye, this is a port of HoppEye for the Packet Squirrel and all credit for the idea goes to @H8.to.

Also, I haven't given up on PopsWRT. This is a quick payload I thought I would write, as it is very small, easy to do and seemed to be very popular. I didn't see a port for PS as of yet so I made a quick one and am releasing it here for anyone who wants it.

I haven't set it to actually move the payload chosen to a switch position, it just runs the corresponding .sh file.
E.g. If I choose magenta (default: 1), then it runs payload.sh in the "1" directory.

Usage:

  1. Put the payload on either switch2 or switch3
  2. Once the payload has started (indicated by a magenta LED - or if you've changed it it will be the first LED) you can start choosing a payload
  3. Use the switch to choose a payload. The payload knows the original switch position and the current switch position
    • Decrease = LEFT of original switch position (e.g. starting switch = switch2, therefore switch1 is LEFT)
    • Increase = RIGHT of original switch position (e.g. starting switch = switch2, therefore switch3 is RIGHT)
    • Enter = BUTTON (press the button to start the selected payload - indicated by the LED flashing the colour chosen)
  4. You're done! It will run the payload chosen.

Default colour setup (can be seen in the payload.sh):

1. MAGENTA
2. RED
3. YELLOW/AMBER
4. GREEN
5. BLUE
6. CYAN
7. WHITE
8. OFF

 

Here's the link to the Github.

Feel free to add suggestions or report bugs here.
I know most of you would like the payload to go to a specific switch and that's easy done.

Edited by Dave-ee Jones
Link to post
Share on other sites

Quick update!

  • Added 8th payload support - default colour is OFF
  • Added full payload support, allowing the user to launch a full payload from the corresponding directory in Diodamic's switch folder
    • E.g.  If I chose the Magenta payload it would source the script from "<diodamic-switch-dir>/1/payload.sh"
  • Like 1
Link to post
Share on other sites
  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...