4l4k4z4m Posted December 28, 2017 Share Posted December 28, 2017 Hi, I got a teensy 2++ and i use it as bad usb, by plugging it with the usb connector, the question is: Can i put the 5 usb wires on the teensy pins and make it work by connecting directly to them ? (I'm a little newbie in electronic ..) Quote Link to comment Share on other sites More sharing options...
kleo Posted December 28, 2017 Share Posted December 28, 2017 (edited) Since the Teensy 2.0++ uses a mini b port, you could use a male mini b - usb cable to usb male plug. I use these adapters for my Teensy 3.6 since they have a micro b port. Edit: @4l4k4z4m Technically you could do it but it would be too fiddly to solder wires to attach usb wires onto the board. I wouldn't recommend it unless you have a lot of Teensy boards lying around to mess with. This is how I ruined my older Teensy 2.0 board. You could follow this as a guide for replacing mini b to micro b https://www.youtube.com/watch?v=mOsBbEZ_1Lo Same goes if you want to solder wires directly. Edited December 28, 2017 by kbeflo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.