Jump to content
cephasiii

BRICKED PINEAPPLE NANO???

Recommended Posts

Looking for a little help with setting up my wifi pineapple nano I just got today.

I am using a macbook pro (host) with Kali (VBox) and Kali (VMware).

I initially started the setup of my pineapple on my mac using firefox and make it all the way to making the AP and assigned passwords. However, somewhere along the way I did something that has seemed to brick my pineapple.

I have tried to reset the pineapple at least a dozen times, using the same method each time, from multiple websites, inside my mac os and Kali - VBox and VMware. When I plug in my pineapple, it blinks very rapidly.

1. unplugged pineapple

2. held down reset button --> plugged in pineapple using the usb eth to usb

3. released the reset button after 10 sec

4. used lsusb to ensure Kali was reading the pineapple as a usb

5. ifconfig and found pineapple on eth2, however mac address was different than what was on the bottom???

6. ifconfig eth2 192.168.1.2 netmask 255.255.255.0 up  --> ifconfig to verify the change

---here is where the problems begin---

#pineapple would drop its ip address of 192.168.1.2. It would only show the ipv6

7. entered 192.168.1.1 into firefox and would SOMETIMES get the firmware update page.

8. would load the firmware 'upgrade-2.0.1.bin', pineapple would flash rapidly

9. change the ip address back to 172.16.42.42, 'ifconfig eth2 172.16.42.42 netmask 255.255.255.0 up'

10. entered 172.16.42.1:1472 into firefox browser and would get a "firefox can't establish a connection at 172.16.42.42'

Any help would be much appreciated.

Here are the websites I have used to assist:

https://www.wifipineapple.com/pages/faq

 

 

Share this post


Link to post
Share on other sites
9 hours ago, cephasiii said:

When I plug in my pineapple, it blinks very rapidly.

Needs an SD card in it to boot, its a small bug thats been discovered. See this post: -

 

Share this post


Link to post
Share on other sites

@Foxtrot, thanks for update. I did end up getting the nano up and running; initially on my mac. I then was able to get it to work with my Kali VM

Now just having issues getting an internet connection to my nano via wp6 script on Kali VM.... I was able to utilize the wireless usb device and connect to the client so my computer was able to connect, but no such luck wired.    Any assistance would be appreciated. Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...