Strigoi Posted June 3, 2017 Share Posted June 3, 2017 Just purchased and recieved the Pineapple Tetra. Every time I run Pine Ap, the AP restarts. This normal? Quote Link to comment Share on other sites More sharing options...
esa Posted June 3, 2017 Share Posted June 3, 2017 5 hours ago, T-Bone said: Just purchased and recieved the Pineapple Tetra. Every time I run Pine Ap, the AP restarts. This normal? Likely that you are not supplying enough power to Tetra. 1 Quote Link to comment Share on other sites More sharing options...
Strigoi Posted June 3, 2017 Author Share Posted June 3, 2017 Ahh, I was powering the device just with the 2-1 usb cables. I will try the power adapter. Quote Link to comment Share on other sites More sharing options...
Strigoi Posted June 3, 2017 Author Share Posted June 3, 2017 Esa, I was kinda down last night with the constant reboots. I appreciate your post, It works like a charm now. Thank you kindly! Quote Link to comment Share on other sites More sharing options...
ADK Posted August 1, 2017 Share Posted August 1, 2017 Hello Hak5 Forum! I just wanted to ask if anyone had any recommendations for a good UK mains power supply for the Tetra, obvs the US one came with it and I can use a crappy adaptor but I'd rather just get a UK one.   Output : 12v===1.5 A   Many Thanks Ad  Quote Link to comment Share on other sites More sharing options...
b0N3z Posted August 2, 2017 Share Posted August 2, 2017 You need to find one that does 12v2a to fully power the tetra under full load or it will start acting funny Quote Link to comment Share on other sites More sharing options...
Perimiter Posted August 12, 2017 Share Posted August 12, 2017 Hi, how is the 12v power supply constructed? Does it require 12.0v or is it flexible voltage? (Can i run it of solar power 11-14v without a dc-dc converter) Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted August 12, 2017 Share Posted August 12, 2017 There is some variance, but I have seen instabilities. For stable operation, you probably want to clean it up to a consistent 12V. Quote Link to comment Share on other sites More sharing options...
pfsykes Posted August 15, 2017 Share Posted August 15, 2017 Hi, This is my first post... so be kind. I have had my Tetra less that 12hrs. i have reset it and update the firmware more times than i care to think about... The issue happens when enabling PineAP it seems ok then the gui goes unresponsive and reboots (following this guide https://www.youtube.com/watch?v=eHnQwTCKe2o).  I finally managed to get something form the  uart console the would indicate a Kernel panic. not sure where to go from here, so any help is appreciated. Before you ask this is powered with the wall wart and also the y usb cable too from laptop / USB powerbank / Anker charger. Full log including boot is here https://pastebin.com/i3DY01Kk Not sure where to go with this if its a hardware fault but that seems very unlikely.  Thanks in advance Peter   root@Pineapple:/tmp# tail -f pineap.log [  264.320000] device wlan1mon entered promiscuous mode [  339.300000] Unhandled kernel unaligned access[#1]: [  339.300000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.36 #16 [  339.300000] task: 803a46d0 ti: 8039e000 task.ti: 8039e000 [  339.300000] $ 0  : 00000000 00000000 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 ffff00fe [  339.300000] $ 8  : 1100fc00 1000001f 86fe5c80 65424301 [  339.300000] $12  : 7f980e30 778fc3a0 00000000 00000007 [  339.300000] $16  : 00000000 00000001 8034420c 00000001 [  339.300000] $20  : 87fcf9fc b8060090 00000000 00000000 [  339.300000] $24  : 00000000 80069d6c [  339.300000] $28  : 8039e000 8039fdb0 00001101 80082b80 [  339.300000] Hi   : 0000004e [  339.300000] Lo   : ffdb2100 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000]   Not tainted [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 00800414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process swapper (pid: 0, threadinfo=8039e000, task=803a46d0, tls=00000000) [  339.300000] Stack : 00000002 80069fd8 00200000 00000f5b 00000001 00000002 00000001 80082b80      00000000 80000000 00b10018 00b00014 00000007 8006de4c 00000000 00000001      8034420c 00000001 00000000 80060830 86900ed0 00002912 00000000 00000000      00000004 00000000 803b0000 00000000 00000000 00000000 00000000 00000000      00000000 01000000 1100fc00 ffff00fe 8039ffe0 0000fc00 86fe5c80 65424301      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<8006dd70>] r4k_wait_irqoff+0x18/0x20 [  339.300000] [<8009f3f4>] cpu_startup_entry+0xec/0x138 [  339.300000] [<803beb58>] start_kernel+0x428/0x440 [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#2]: [  339.300000] CPU: 0 PID: 0 Comm: swapper Tainted: G    D     3.18.36 #16 [  339.300000] task: 803a46d0 ti: 8039e000 task.ti: 8039e000 [  339.300000] $ 0  : 00000000 00000001 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 61202039 [  339.300000] $16  : 00000000 80341914 0000000b 8039fd24 [  339.300000] $20  : 00000000 80082b80 00000000 00000000 [  339.300000] $24  : 00000000 8020c248 [  339.300000] $28  : 8039e000 8039fb98 00001101 80082b80 [  339.300000] Hi   : 00000000 [  339.300000] Lo   : 7848e000 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000]   Tainted: G    D [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 40808414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process swapper (pid: 0, threadinfo=8039e000, task=803a46d0, tls=00000000) [  339.300000] Stack : 00000000 00000000 00000000 00000000 00000003 00000007 80341914 80082b80      00000000 000001d2 00000000 00000004 803f4210 8006de4c 00000000 00000000      00000000 00000000 8039fe00 80060830 0000000a 800a9a18 00000000 00000005      00000008 80340fdc 00000000 00000000 00000000 00000001 803f3888 00000001      00000001 00000001 00000000 8020cd74 00000000 803ffd28 00000001 20336331      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<8006dd70>] r4k_wait_irqoff+0x18/0x20 [  339.300000] [<8009f3f4>] cpu_startup_entry+0xec/0x138 [  339.300000] [<803beb58>] start_kernel+0x428/0x440 [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#3]: [  339.300000] CPU: 0 PID: 0 Comm: swapper Tainted: G    D     3.18.36 #16 [  339.300000] task: 803a46d0 ti: 8039e000 task.ti: 8039e000 [  339.300000] $ 0  : 00000000 00000001 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 61202039 [  339.300000] $16  : 00000000 80341914 0000000b 8039fb0c [  339.300000] $20  : 00000000 80082b80 00000000 00000000 [  339.300000] $24  : 00000000 8020c248 [  339.300000] $28  : 8039e000 8039f980 00001101 80082b80 [  339.300000] Hi   : 00000000 [  339.300000] Lo   : 7848e000 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000]   Tainted: G    D [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 40809414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process swapper (pid: 0, threadinfo=8039e000, task=803a46d0, tls=00000000) [  339.300000] Stack : 00000000 00000000 00000000 00000000 00000003 00000007 80341914 80082b80      00000000 000001fb 00000000 00000004 803f4210 8006de4c 00000000 00000000      00000000 00000000 8039fbe8 80060830 0000000a 800a9a18 00000000 00000005      00000008 80340fdc 00000000 00000000 00000000 00000001 803f3888 00000001      00000001 00000001 00000000 8020cd74 00000000 80400be8 00000001 20336331      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<8006dd70>] r4k_wait_irqoff+0x18/0x20 [  339.300000] [<8009f3f4>] cpu_startup_entry+0xec/0x138 [  339.300000] [<803beb58>] start_kernel+0x428/0x440 [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#4]: [  339.300000] CPU: 0 PID: 0 Comm: swapper Tainted: G    D     3.18.36 #16 [  339.300000] task: 803a46d0 ti: 8039e000 task.ti: 8039e000 [  339.300000] $ 0  : 00000000 00000001 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 61202039 [  339.300000] $16  : 00000000 80341914 0000000b 8039f8f4 [  339.300000] $20  : 00000000 80082b80 00000000 00000000 [  339.300000] $24  : 00000000 8020c248 [  339.300000] $28  : 8039e000 8039f768 00001101 80082b80 [  339.300000] Hi   : 00000000 [  339.300000] Lo   : 7848e000 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000]   Tainted: G    D [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 40809414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process swapper (pid: 0, threadinfo=8039e000, task=803a46d0, tls=00000000) [  339.300000] Stack : 00000000 00000000 00000000 00000000 00000003 00000007 80341914 80082b80      00000000 0000022b 00000000 00000004 803f4210 8006de4c 00000000 00000000      00000000 00000000 8039f9d0 80060830 0000000a 800a9a18 00000000 00000005      00000008 80340fdc 00000000 00000000 00000000 00000001 803f3888 00000001      00000001 00000001 00000000 8020cd74 00000000 80401c10 00000001 20336331      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<8006dd70>] r4k_wait_irqoff+0x18/0x20 [  339.300000] [<8009f3f4>] cpu_startup_entry+0xec/0x138 [  339.300000] [<803beb58>] start_kernel+0x428/0x440 [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#5]: [  339.300000] CPU: 0 PID: 0 Comm: swapper Tainted: G    D     3.18.36 #16 [  339.300000] task: 803a46d0 ti: 8039e000 task.ti: 8039e000 [  339.300000] $ 0  : 00000000 00000001 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 61202039 [  339.300000] $16  : 00000000 80341914 0000000b 8039f6dc [  339.300000] $20  : 00000000 80082b80 00000000 00000000 [  339.300000] $24  : 00000000 8020c248 [  339.300000] $28  : 8039e000 8039f550 00001101 80082b80 [  339.300000] Hi   : 00000000 [  339.300000] Lo   : 7848e000 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000]   Tainted: G    D [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 40809414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process swapper (pid: 0, threadinfo=8039e000, task=803a46d0, tls=00000000) [  339.300000] Stack : 00000000 00000000 00000000 00000000 00000003 00000007 80341914 80082b80      00000000 00000262 00000000 00000004 803f4210 8006de4c 00000000 00000000      00000000 00000000 8039f7b8 80060830 0000000a 800a9a18 00000000 00000005      00000008 80340fdc 00000000 00000000 00000000 00000001 803f3888 00000001      00000001 00000001 00000000 8020cd74 00000000 80402da0 00000001 20336331      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<8006dd70>] r4k_wait_irqoff+0x18/0x20 [  339.300000] [<8009f3f4>] cpu_startup_entry+0xec/0x138 [  339.300000] [<803beb58>] start_kernel+0x428/0x440 [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#6]: [  339.300000] CPU: 0 PID: 0 Comm: swapper Tainted: G    D     3.18.36 #16 [  339.300000] task: 803a46d0 ti: 8039e000 task.ti: 8039e000 [  339.300000] $ 0  : 00000000 00000001 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 61202039 [  339.300000] $16  : 00000000 80341914 0000000b 8039f4c4 [  339.300000] $20  : 00000000 80082b80 00000000 00000000 [  339.300000] $24  : 00000000 8020c248 [  339.300000] $28  : 8039e000 8039f338 00001101 80082b80 [  339.300000] Hi   : 00000000 [  339.300000] Lo   : 7848e000 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000]   Tainted: G    D [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 40809414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process swapper (pid: 0, threadinfo=8039e000, task=803a46d0, tls=00000000) [  339.300000] Stack : 00000000 00000000 00000000 00000000 00000003 00000007 80341914 80082b80      00000000 000002a0 00000000 00000004 803f4210 8006de4c 00000000 00000000      00000000 00000000 8039f5a0 80060830 0000000a 800a9a18 00000000 00000005      00000008 80340fdc 00000000 00000000 00000000 00000001 803f3888 00000001      00000001 00000001 00000000 8020cd74 00000000 80404098 00000001 20336331      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<80071068>] die+0xac/0x10c [  339.300000] [<80072b88>] do_ade+0x470/0x890 [  339.300000] [<80060820>] ret_from_exception+0x0/0x10 [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [<80082b80>] irq_enter+0x10/0x64 [  339.300000] [<8006de4c>] do_IRQ+0x14/0x2c [  339.300000] [<80060830>] ret_from_irq+0x0/0x4 [  339.300000] [<8006dd70>] r4k_wait_irqoff+0x18/0x20 [  339.300000] [<8009f3f4>] cpu_startup_entry+0xec/0x138 [  339.300000] [<803beb58>] start_kernel+0x428/0x440 [  339.300000] [  339.300000] <out put shortened>  [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#91]: [  339.300000] CPU: 0 PID: 34849 Comm: @ Tainted: G    D     3.18.36 #16 [  339.300000] task: 8025565c ti: 8037a000 task.ti: 28a20007 [  339.300000] $ 0  : 00000000 00000015 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 61202039 [  339.300000] $16  : 00000000 80341914 0000000b 8037bc14 [  339.300000] $20  : 0130014e 80082b80 2ca20005 00000000 [  339.300000] $24  : 00000000 8020c248 [  339.300000] $28  : 8037a000 8037ba88 00030000 80082b80 [  339.300000] Hi   : 00000000 [  339.300000] Lo   : 7848e000 [  339.300000] epc  : 800a9a04 rcu_irq_enter+0x34/0x8c [  339.300000] ra   : 80082b80 irq_enter+0x10/0x64 [  339.300000] Status: 1100fc02 KERNEL EXL [  339.300000] Cause : 40809414 [  339.300000] BadVA : 0000000b [  339.300000] PrId  : 0001974c (MIPS 74Kc) [  339.300000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [  339.300000] Process @ (pid: 34849, threadinfo=8037a000, task=8025565c, tls=00780097) [  339.300000] Stack : 00000000 00000000 00000000 00000000 00000003 00000007 80341914 80082b80      00000000 00000d8e 00000000 00000004 803f4210 8006de4c 00000000 00000000      00000000 00000000 8037bcf0 80060830 0000000a 800a9a18 00000000 00000005      00000008 80340fdc 2ca20005 00000000 00000000 00000015 803f3888 00000001      00000001 00000001 00000928 8020cd74 00000000 80409898 00000001 20336331      ... [  339.300000] Call Trace: [  339.300000] [<800a9a04>] rcu_irq_enter+0x34/0x8c [  339.300000] [  339.300000] Code: 24a30001  0065202b  00862021 <ac43dbec> 00831825  1460000a  ac44dbe8  3c11803a  9222435b [  339.300000] Unhandled kernel unaligned access[#92]: [  339.300000] CPU: 0 PID: 34849 Comm: @ Tainted: G    D     3.18.36 #16 [  339.300000] task: 8025565c ti: 8037a000 task.ti: 28a20007 [  339.300000] $ 0  : 00000000 00000015 803b0000 00000001 [  339.300000] $ 4  : 00000000 00000000 00000000 8020cd74 [  339.300000] $ 8  : 1100fc00 1000001f 00000001 20336331 [  339.300000] $12  : 31383033 03bf0000 00000000 6120203¦ U-Boot 1.1.4 (Dec 22 2015 - 12:54:58) DB120 DRAM: sri Wasp 1.3 wasp_ddr_initial_config(249): (32bit) ddr2 init wasp_ddr_initial_config(426): Wasp ddr init done Tap value selected = 0xf [0x0 - 0x1f] 128 MB     Quote Link to comment Share on other sites More sharing options...
pfsykes Posted August 18, 2017 Share Posted August 18, 2017 hi all.... found the issue. with no aerials connected it works. so connected back right back left front left and its stable. when i connect the front right it reboots when bcast ssid from pool. i also did this with all 4 aerials with the same result. I think the issue might be with one of the skybridge amps...  Any way its in for replacement. Peter. 1 Quote Link to comment Share on other sites More sharing options...
Thomas S. Posted September 4, 2017 Share Posted September 4, 2017 Hello there, I played around wiht the Pineapple Tetra for a vew days and suddenly I have a strange behavior. The pineapple reboots over and over and it seems, that it doesnt boot finaly. How can I do a factory reset? FAQ says, "reset from a fully booted WiFi Pineapple" or "from the web interface". But what can I do if it doesnt boot? The Pineapple is connected via the Y-USB cable to my computer. regards, Tom Quote Link to comment Share on other sites More sharing options...
Thomas S. Posted September 4, 2017 Share Posted September 4, 2017 could it be, that I do not get enough power over the USB?? Because when I connect the Pineapple to the wall plug, its working. reg. Tom Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted September 4, 2017 Share Posted September 4, 2017 38 minutes ago, Thomas S. said: could it be, that I do not get enough power over the USB?? Because when I connect the Pineapple to the wall plug, its working. reg. Tom Spot on. The WiFi Pineapple TETRA requires 18-24W of power to operate. Via USB you need to provide at a minimum 5V@3.6A. During peak power consumption, this may jump up to a maximum of 5V@4.8A. You can use both micro USB ports together to power the unit. Quote Link to comment Share on other sites More sharing options...
Thomas S. Posted September 4, 2017 Share Posted September 4, 2017 13 minutes ago, Sebkinne said: Spot on. The WiFi Pineapple TETRA requires 18-24W of power to operate. Via USB you need to provide at a minimum 5V@3.6A. During peak power consumption, this may jump up to a maximum of 5V@4.8A. You can use both micro USB ports together to power the unit. OK - thanks! Quote Link to comment Share on other sites More sharing options...
N1ghtCap Posted September 12, 2017 Share Posted September 12, 2017 So I've had the Wi-Fi pineapple for a little while now, and I've been having a problem consistently that within five minutes the pineapple crashes and reboots. I thought it might have been due to specific activity, but just turning the pineapple on and letting it sit it still crashes within about five minutes. I've tried doing a factory reset multiple times, and after doing a little bit of research I thought it might be a power supply problem, but after trying the battery and the wall charger to no avail it would seem as though that's not the problem. I'm starting to think I may have got a lemon, and this is a hardware problem. Anyone had the same problems? If so have you found a way to fix this? Quote Link to comment Share on other sites More sharing options...
Just_a_User Posted September 12, 2017 Share Posted September 12, 2017 (edited) if you connect using the uart serial you might get some dmesg clues as to why this is occuring. The symptom does sound like power tho, I have experienced similar in my early days when starting out with the tetra. One thing you may wish to try would be a firmware recovery (different to a factory reset) and see if that solves your issue - make sure you use the 12V 2A supply for that as you don't want to bork the flash and end up with a brick. I would even be inclined to enter boot loader flash mode and wait for a while (10mins or so) without flashing to make sure its stable enough to flash a factory firmware. https://wifipineapple.github.io/wifipineapple-wiki//#!troubleshooting.md Edited September 12, 2017 by Just_a_User Quote Link to comment Share on other sites More sharing options...
basos12345 Posted September 16, 2017 Share Posted September 16, 2017 I am in a similar situation. I have done factory reset many times, and firmware reset a few times. I get about 15min before reboot. After reboot I can reconnect (wp6.sh) and sign in at the GUI, but anything involving wlan1 will not work until the unit has been without power for some time (cool down? although it does not feel hot). Since it seemed like a power issue initially, I have been giving it as much as I can (Y-cable to the ETH port, from the hosting laptop(kali), Y-cable to a powered USB hub (with no computer hooked up to it) to the UART port, and the AC wall adapter. The system log in the GUI seems to only show results for the current session so its hard to see what may have caused the reboot (if there is a to log SSH to on the system that may show more that would be helpful) So, I too am at my wits end. Ive tried a different computer, again with Kali installed, and everything seems to be pointing me towards the hardware. In my most recent attempts I have just been starting it up, starting PineAP and just let it sit until it goes into a reboot (which I just watched it do) If there is anything I am doing wrong, anything I should try, or if this looks like a problem with the hardware I would appreciate hearing about it. Quote Link to comment Share on other sites More sharing options...
cmw Posted September 19, 2017 Share Posted September 19, 2017 I have several Tetras.  Unfortunately, they crash/reboot very often.  It fills me with nostalgia for my days as a Windows user. I have a Nano, too, but don't use it often enough to say if it crashes with the same frequency. 1 Quote Link to comment Share on other sites More sharing options...
andrew0187 Posted September 30, 2017 Share Posted September 30, 2017 I just got a Tetra used off someone for $160 CAD (128 USD). I am loving it so far and it's a very cool tool. I would like to get a portable battery for it. The one that comes with the Tetra Tactical is not offered on Amazon Prime in Canada. I was looking at this one instead:  http://amzn.to/2fEgOOX Will this work with the Tetra? Does anyone have any other battery recommendations for a Canadian? Quote Link to comment Share on other sites More sharing options...
Forkish Posted October 1, 2017 Share Posted October 1, 2017 I use an Anker PowerCore 26800 which has three usb ports. Can run a moderate load tetra for 10+ hours. Quote Link to comment Share on other sites More sharing options...
Darksider666 Posted October 14, 2017 Share Posted October 14, 2017 My Tetra reboots while I'm injecting.... Is it really a power problem? I connect it with the Y-Cable to the same USB-Ports as always and it worked fine until today :( Quote Link to comment Share on other sites More sharing options...
b0N3z Posted October 16, 2017 Share Posted October 16, 2017 The Tetra needs 18-24w of power to keep it running without reboot or crash. 2 usb ports on your pc will not provide that much power. It comes with a wall plugin (12v2a = 24w) so you dont have these kind of problems. if your going to use just the micro usb on the back of the device you will want to use a battery that has at least 2 usb ports at 5v2.4a and use the y-cable provided. Both micro usb will provide power to the tetra and dont worry about using to much power with a 5v power supply because the tetra will only draw what it needs to run without overpowering itself. Quote Link to comment Share on other sites More sharing options...
PixL Posted October 23, 2017 Share Posted October 23, 2017 Hi, I'm using the tetra with an extra wlan2 wifi adapter connected by USB as below: Bus 001 Device 003: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It is a Racksoy 802.11n I got from Amazon. I can set it up, connect to my own router wpa2 wifi connection with the PSK etc. and all is well for a while but the stability it patchy even when i'm 10 feet away from the router. It will sometimes lose connection and when I try client mode again it finds no SSIDs to connect to but instead says "fail". Also sometimes when I start up the tetra wlan2 is not initialised and the lights on the usb adapter are not lit. Â Any thoughts? Â Quote Link to comment Share on other sites More sharing options...
b0N3z Posted October 23, 2017 Share Posted October 23, 2017 how are you powering the Tetra and do you have problems with anything else besides just wlan2. It sounds like the PIneapple just isnt getting enough power to power it and the usb wifi. Quote Link to comment Share on other sites More sharing options...
PixL Posted October 23, 2017 Share Posted October 23, 2017 I'm powering the tetra from a 12v barrel charger, 12v 2A... the one that came with my Seagate external hard drive :) Actually it's just done the same when I use my TL-TN722N. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.