Jump to content

Nano Initial configuration


460s

Recommended Posts

So Noob here, with a new Wifi Pineapple Nano :wacko:

Trying to install Nano on Win 10:

New network is detectable, but I get error: 

Load Bulletins - "Error connecting to WiFiPineapple.com. Please check your connection."

tried hard reset and new install, no help.

Network settings screenshot below:

 

network-connections-settings.jpg

 

Link to comment
Share on other sites

I haven't used windows in years so im just gunna throw you a couple of ideas while you wait for someone else to suggest or you find something else in the forums.

1. use the default gateway IP of your router usually something like 192.168.1.1 check yours.

2. you can also use the routers ip for DNS server or manaully enter 8.8.8.8 (google's public dns server)

Link to comment
Share on other sites

1 minute ago, 460s said:

Changed IPv4 settings to:

added preferred DSN 8.8.8.8

and default gateway: 172.16.42.1

172.16.42.1 is the IP of the pineapple so will conflict.

Normally on a home router its the IP you would browse to when configuring your routers wifi or changing settings so something like 192.168.1.1 or 192.168.0.1

You can usually get a clue from looking at the IP given to your wifi adapter, as an example - say it gives your wifi adapter the ip address 192.168.1.145 then its a good chance your routers IP will be 192.168.1.1 or sometimes  192.168.1.254 depending on manufacturer.

  • Like 1
Link to comment
Share on other sites

What should I change to?

So I get this:

Ethernet adapter PineApple:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::854c:be4d:4497:9368%7
   IPv4 Address. . . . . . . . . . . : 172.16.42.42
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.245

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::b9a2:3f89:23cd:891a%15
   IPv4 Address. . . . . . . . . . . : 192.168.120.61
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.120.138

Link to comment
Share on other sites

5 minutes ago, 460s said:

So now i'm connected to a different network and still get error to load bulletins, looks like this:

1. Make sure your testing this in networks you own or have permission to use a pineapple on. Seriously.

2. Try default gateway 192.168.252.1 (its a poor quality screen shot but i think thats what it says)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...