Perimiter Posted August 18, 2017 Share Posted August 18, 2017 I'we had my Pineapple Tetra for two weeks and I'we spent most of the time just trying to get it running, and It's just getting worse every time. I get squashfs errors, unhandled kernel unalinged access errors. After a few reinstallations of tetra_factory.bin it boots up, and if I leave it after basic config it runs about two hours before rebooting and i need to reflash. It has been running mostly on the wall adapter, but I'we tried running it on my labratory powersupply at work on 12.0v connected to the 5.5mm connector, to 2.1amp usb power packs, 5.0v from lab supply to the micro usb ports (and even 5.10v as most usb power packs deliver that). No change in the situation. Quote [ 15.260000] SQUASHFS error: xz decompression failed, data probably corrupt [ 15.270000] SQUASHFS error: squashfs_read_data failed to read block 0xa5eb2 [ 15.270000] SQUASHFS error: Unable to read fragment cache entry [a5eb2] [ 15.280000] SQUASHFS error: Unable to read page, block a5eb2, size 30b28 [ 15.290000] SQUASHFS error: Unable to read fragment cache entry [a5eb2] [ 15.290000] SQUASHFS error: Unable to read page, block a5eb2, size 30b28 [ 15.300000] Starting init: /etc/preinit exists but couldn't execute it (error -5) [ 15.480000] SQUASHFS error: xz decompression failed, data probably corrupt [ 15.490000] SQUASHFS error: squashfs_read_data failed to read block 0x3eecf6 [ 15.500000] SQUASHFS error: Unable to read fragment cache entry [3eecf6] [ 15.500000] SQUASHFS error: Unable to read page, block 3eecf6, size 2bed0 [ 15.510000] SQUASHFS error: Unable to read fragment cache entry [3eecf6] [ 15.520000] SQUASHFS error: Unable to read page, block 3eecf6, size 2bed0 [ 15.530000] SQUASHFS error: Unable to read fragment cache entry [3eecf6] [ 15.530000] SQUASHFS error: Unable to read page, block 3eecf6, size 2bed0 [ 15.540000] SQUASHFS error: Unable to read fragment cache entry [3eecf6] [ 15.580000] Workqueue: ubiblock0_0 ubiblock_do_work [ 15.550000] SQUASHFS error: Unable to read page, block 3eecf6, size 2bed0 [ 15.550000] Starting init: /sbin/init exists but couldn't execute it (error -5) [ 15.580000] $ 0 : 00000000 00000000 00000001 00000000 [ 15.580000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 8009ebe4 Quote [ 47.770000] Unhandled kernel unaligned access[#1]: [ 47.770000] CPU: 0 PID: 1266 Comm: kworker/u2:2 Not tainted 3.18.36 #10 [ 47.770000] task: 85c71d10 ti: 85c74000 task.ti: 85c74000 [ 47.770000] $ 0 : 00000000 00000001 00000001 00000200 [ 47.770000] $ 4 : 87802600 000080d0 81102230 0000f172 [ 47.770000] $ 8 : 00000001 803f1000 803f1000 803f1000 [ 47.770000] $12 : 803f1000 8782dfa4 00000000 803f1000 [ 47.770000] $16 : 00000001 87802600 000080d0 87af4780 [ 47.770000] $20 : 8687b000 803a0000 00000001 85c16c80 [ 47.770000] $24 : 00000000 80196ac8 [ 47.770000] $28 : 85c74000 85c75e90 803ab7cc 80101d64 [ 47.770000] Hi : 0000000b [ 47.770000] Lo : 1f505a80 [ 47.770000] epc : 800f84ec kmem_cache_alloc+0x4c/0xec [ 47.770000] Not tainted [ 47.770000] ra : 80101d64 do_execve+0x1c4/0x4c0 [ 47.770000] Status: 1100fc03 KERNEL EXL IE [ 47.770000] Cause : 00800010 [ 47.770000] BadVA : 00000001 [ 47.770000] PrId : 0001974c (MIPS 74Kc) [ 47.770000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common mii aead crypto_hash [ 47.770000] Process kworker/u2:2 (pid: 1266, threadinfo=85c74000, task=85c71d10, tls=00000000) [ 47.770000] Stack : 803a3190 8007e118 00000000 00000000 86b22a00 86bffbe0 803a3190 80101d64 85c75eb0 85c75eb0 85c75eb8 85c75eb8 85c71ed0 00000000 803ab85c 803a3190 86a3ad80 85c16d80 803a3190 00000002 00000000 803a0000 803a3190 85c20480 00000088 8008ee58 774c9e50 7fb60478 8008ed54 85c16d80 803a3190 800997dc 7fb60478 8008ed54 85c16d80 803a3190 80340000 80060878 00000000 00000000 ... [ 47.770000] Call Trace: [ 47.770000] [<800f84ec>] kmem_cache_alloc+0x4c/0xec [ 47.770000] [<80101d64>] do_execve+0x1c4/0x4c0 [ 47.770000] [<8008ee58>] ____call_usermodehelper+0x104/0x150 [ 47.770000] [<80060878>] ret_from_kernel_thread+0x14/0x1c [ 47.770000] [ 47.770000] Code: 00408021 8e220014 02021021 <8c430000> 41666000 30c60001 000000c0 8e220000 8c450000 [ 48.060000] ---[ end trace 101ef3064070ee6e ]--- More logs available at https://www.dropbox.com/s/vo9f30y3h2jkd6u/Pineapple_squashfs_kernelpanic_17.08.2017.zip?dl=1 Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted August 24, 2017 Share Posted August 24, 2017 Hi Perimiter, Have you followed the "Firmware Recovery" instructions from our FAQ (https://wifipineapple.com/faq)? This should fix any squashfs errors. Quote Link to comment Share on other sites More sharing options...
Perimiter Posted August 24, 2017 Author Share Posted August 24, 2017 Hi. The first logfile in the zip file contains several attempts to load tetra_factory.bin and boot after loading. It finally succeeds, but if i try to do anything active after some time I get squashfs errors. The same errors occur after a few hours of idling also. When they have appeared I usually need to run firmware recovery to get it to boot again (tried this > 15 times). Quote Link to comment Share on other sites More sharing options...
Rkiver Posted September 6, 2017 Share Posted September 6, 2017 Hey @Sebkinne just wondering, if a device was acting like this, and trying to reload factory.bin failed, would you say a replacement would be in order? Quote Link to comment Share on other sites More sharing options...
Sebkinne Posted September 6, 2017 Share Posted September 6, 2017 7 hours ago, Rkiver said: Hey @Sebkinne just wondering, if a device was acting like this, and trying to reload factory.bin failed, would you say a replacement would be in order? Most likely, yeah. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.