Jump to content

Bash Bunny Switch issue


Pinni3
 Share

Recommended Posts

So i received my bash bunny today.

It looks ok.
but i have an issue with the switch.
the manual switch only does armed and switch2 .

So switch1 cannot be done???

i changed the payloads out to check if this was the issue.

alway script in switch 2 is done never switch 1 ? 
is this something that have happend before?

or is this a failed switch ?

Current  Firmware on the bunny is 1.3_264

Link to comment
Share on other sites

So what you are saying is that when you select switch 1 on the Bash Bunny it runs the Switch2 payload?

Or are you saying that the manual switch seems to only have two modes, being the 2 ends of the switch? Because that isn't true. Closest to the USB end (on the switch) is Arming mode, then the next one down (in the middle of the switch, so push the knob to the middle of the switch) is Switch2, then the furthest away to the USB end is Switch1 (push it all the way to the end).

Link to comment
Share on other sites

Well, 

If i put the switch in position arming mode (Position 1 closest to the USB connection) it does ARMING Mode.
If i put the switch in Payload1 mode (Position in the middle ) it does the scripts from Payload 2
If i put the switch in Payload2 mode (Position most outer  location from the USB connection ) it does the scripts from Payload 2

Last night i was jumping the switch over and over. Just to be sure it was not a glitch

Now it does the following:
If i put the switch in position arming mode (Position 1 closest to the USB connection) it does ARMING Mode.
If i put the switch in Payload1 mode (Position in the middle ) it does the scripts from Payload 2
If i put the switch in Payload2 mode (Position most outer  location from the USB connection ) it does ARMING Mode

is it wrong to think that there is something wrong with my Hardware switch ?

Link to comment
Share on other sites

Ok so i did the test.

with this script
 

LED R 100
ATTACKMODE HID
source bunny_helpers.sh
QUACK GUI r
QUACK DELAY 100
QUACK STRING Testing Switch Position, Switch Position is $SWITCH_POSITION
QUACK DELAY 100
LED G


the switch in position arming mode (Position 1 closest to the USB connection) it does ARMING Mode.
the switch in Payload1 mode (Position in the middle ) it does  Testing Switch Position, Switch Position is switch2
the switch in Payload2 mode (Position most outer  location from the USB connection ) it does Testing Switch Position, Switch Position is switch1

So i rocked the swich over and over and now it seems stable. 
:huh:
ty for helping.

Link to comment
Share on other sites

21 minutes ago, Pinni3 said:

the switch in Payload1 mode (Position in the middle ) it does  Testing Switch Position, Switch Position is switch2
the switch in Payload2 mode (Position most outer  location from the USB connection ) it does Testing Switch Position, Switch Position is switch1

The switch1 position is not in the middle, here is the scheme

     +-----------------+
 +----                 |   The Bash Bunny by Hak5 is a simple and powerful
 | : |    Boot Modes   |   multi-function USB attack and automation platform
 +----               * |   for penetration testers and systems administrators.
     +--|||------------+
        |||
        ||+-- (sw1) Switch Position 1: Customizeable Payload.
        |+-- (sw2) Switch Position 2: Customizeable Payload.
        +-- (sw3) Switch Position 3: Arming Mode - Serial + Mass Storage.

 

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...