Jump to content

Wifi Pineapple NANO Windows 10 Creator update


Recommended Posts

Hi 

Followed the internet connection sharing tutorials from youtube and hak5 site. Having issues to get Windows 10 to do ICS.  

I have included the details below to show the network configuration.

br-lan    Link encap:Ethernet  HWaddr 00:C0:CA:91:A4:52
          inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2859 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2502 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:669115 (653.4 KiB)  TX bytes:994251 (970.9 KiB)

eth0      Link encap:Ethernet  HWaddr 00:C0:CA:91:A4:52
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3158 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2519 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:759729 (741.9 KiB)  TX bytes:994961 (971.6 KiB)
          Interrupt:4

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:605 errors:0 dropped:0 overruns:0 frame:0
          TX packets:605 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:41328 (40.3 KiB)  TX bytes:41328 (40.3 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:C0:CA:91:75:3C
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:652 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:77485 (75.6 KiB)

wlan0-1   Link encap:Ethernet  HWaddr 02:C0:CA:91:75:3C
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:651 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:77421 (75.6 KiB)

wlan1     Link encap:Ethernet  HWaddr 00:C0:CA:91:8C:D7
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

 

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         172.16.42.42    0.0.0.0         UG    0      0        0 br-lan
172.16.42.0     *               255.255.255.0   U     0      0        0 br-lan

 

Ive tried everything and can't get the Pineapple on the internet. Any troubleshooting tips or does anyone else have issues with  Creator update.

4 hours of troubleshooting no result. Tried also via Ubuntu 17.04 and Kali Linux 2 in VMWare and Virtualbox same result even following the wp6.sh scripts.

Firmware is 1.1.3

 

Any ideas??

 

 

Link to comment
Share on other sites

I don't have any issues with Win10 Creator Update, and i'm using ICS just fine.
Same when using wp6.sh on Ubuntu and Kali. Also works under VMware.

When having the Nano connected, do you have any drivers that are not installed?
Do the computer recognize the network-device when you connect the Nano over USB?
It should appear in "Network and Sharing Center" under "Change adapter settings."
That adapter should  have the IP: "172.16.42.42" specified manually.
And then your "WAN" network-adapter should be shared towards your Nano-connection.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...