Rawpower Posted April 21, 2017 Posted April 21, 2017 Hi, I don't receive any results performing the 'recon'-scan? The scan even don't stops, stays on 100% ... without results in the frame below What's wrong? Thx Bart Quote
b0N3z Posted April 21, 2017 Posted April 21, 2017 how are you powering device and what firmware are you using Quote
Rawpower Posted April 21, 2017 Author Posted April 21, 2017 Thanks for quick reply ;-) power: USB via 220V adapter latest firmware: 1.1.2 Bart Note: module site survey give me some results Quote
b0N3z Posted April 22, 2017 Posted April 22, 2017 (edited) 220v usb? You need a 5v power supply for the usb power with the right amount of Amps to power the tetra. the tetra need 18-24 watts of power which equals 2x 5v2.4a power supply. some batteries have 2 5v2.4a plugs or you could use 2 different batteries with the 5v2.4a usb ports. under powering causes problems but overpowering with a 5v power supply is not a problem as the tetra will only draw what it needs. Edited April 22, 2017 by b0N3z Quote
esa Posted April 23, 2017 Posted April 23, 2017 On 22/04/2017 at 1:25 AM, Rawpower said: Hi, I don't receive any results performing the 'recon'-scan? The scan even don't stops, stays on 100% ... without results in the frame below What's wrong? Thx Bart Try a factory reset. Quote
Rawpower Posted April 24, 2017 Author Posted April 24, 2017 powering: okay (via wall 220V outlet and transfer, not over USB ... ;-( factory reset: done, but no improvement. But I could further pinpoint the problem ... Only when I select 2,4 GHz recon (or both) they recon process hangs with 100% without results AND It happens only at my HOME-location, I tested myTetra-pineapp @my parents the recon-functions works normal .... So question ... what @ my HOME can spoil the recon-function @2,4Ghz band? Any suggestions? Many Thanks for your input ! Bart Quote
esa Posted April 25, 2017 Posted April 25, 2017 (edited) 16 hours ago, Rawpower said: powering: okay (via wall 220V outlet and transfer, not over USB ... ;-( factory reset: done, but no improvement. But I could further pinpoint the problem ... Only when I select 2,4 GHz recon (or both) they recon process hangs with 100% without results AND It happens only at my HOME-location, I tested myTetra-pineapp @my parents the recon-functions works normal .... So question ... what @ my HOME can spoil the recon-function @2,4Ghz band? Any suggestions? Many Thanks for your input ! Bart this is strange, doesnt sound like a faulty hardware since you can get it to work occasionally. try this and report any errors faced: 1) restart your pineapple 2) ssh to it 3) Start wlan1 as monitor mode using airmon-ng airmon-ng wlan1 start 4) Perform airodump using your wlan1mon interface. you should expect to see some MAC addresses in your vicinity airodump-ng wlan1mon 5) This performs the same command as running recon on 2.4ghz for 1min. The results will be stored in /tmp/re pinesniffer wlan1mon 60 1 /tmp/re 6) Read /tmp/re, you should expect some results cat /tmp/re Edited April 25, 2017 by esa Quote
0phoi5 Posted April 26, 2017 Posted April 26, 2017 Do you parents have the same WiFi router? Sounds like the router is doing something to make the Tetra hang. Maybe a security feature, or simply the way in which it transmits it's data. Try your hub elsewhere? Quote
Rawpower Posted April 26, 2017 Author Posted April 26, 2017 ok, thanks for the help and suggestions. My colleague borrowed the Tetra. So, as soon I receive the Tetra back, I will perform the CLI script (of esa) and keep you posted, Cheers, Bart Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.