moonlit Posted December 8, 2006 Share Posted December 8, 2006 Just had a conversation on IRC about really really cheap 'disco lights' and I thought I may as well post up here 'cos it's cool... Aim: To make some lights that sync to music for as cheap as possible and as simply as possible. Requirements: A reasonably powerful amplifier, some wire, a few spare xmas light bulbs or flashlight bulbs. Method: First of all attatch two wires to your light bulb(s), one on each of the two terminals/wires. Plug the other ends of the wires in to the speaker output of the amplifier, adding a compatible connector if required. Polarity (which way round they go, + and -) isn't important. Add a couple of lights to the left channel output and a couple on the right channel for an interesting effect. Connect your amp to a suitable sound source. I used the rear channel of my sound card because that way I can easily have my lights and my audio on at the same time without any messing about. Turn on your amplifier, turn down the volume and play some music. Slowly turn up the volume and you should now be watching your lights pulsating to the music. You'll probably get the best effect with the volume up quite loud, depending on the output of the amp you may have to turn it right up, play with the equaliser if the amp has one. More bass = brighter lights, especially when there's a bass kick in the music. Music with a heavy beat works best but experiment with different tracks, see what comes you come up with. So normally the set up would be: [Left Speaker] [PC]=====[AMP]=====| [Right Speaker] Here's what it looks like post-mod: [Left Bulb(s)] [PC]=====[AMP]=====| [Right Bulb(s)] You'll find that placing a CD spool lid over each bulb or set of bulbs gives a nice effect, it gives a sort of frosted effect to the light and stops your eyes hurting as much when you stare at them ;) Results: http://www.stickam.com/viewMovieGallery.do?uId=173815693 There's a few videos of when I just did that a few minutes ago. I'd done it before so I knew it'd work, that's how quick it is though... if you have wire and bulbs it takes less than 5 minutes to get it working :D Apologies for the crappy video/audio quality, it looks much better in RL. It seems stickam.com is having problems so it may or may not be available right now. If not, try again later. Add a couple of old speaker enclosures or maybe a DIY light box enclosure and maybe even coloured bulbs or filters and you have your very own ghetto-tastic 'disco'/club lights :D Disclaimer: Neither moonlit or Hak5 are responsible for any damage to equipment or personal injury, proceed with this mod at your own risk. Amplifiers aren't built to run light bulbs, maybe choose an amp you're not going to need. Quote Link to comment Share on other sites More sharing options...
sneaky_rupert Posted December 8, 2006 Share Posted December 8, 2006 This also came up as a result of the mod discussion: http://rybitski.googlepages.com/musicsyncr...christmaslights It does not depend on how big your amp is, as it uses a simple bridge rectifier, and Solid State Relay to do the driving with AC wall power. As always: BE CAREFUL when using wall AC outlets. Hook up something wrong, and you could burn your house down. Quote Link to comment Share on other sites More sharing options...
moonlit Posted December 8, 2006 Author Share Posted December 8, 2006 As always: BE CAREFUL when using wall AC outlets. Hook up something wrong, and you could burn your house down. ...or worse seriously injure or even kill yourself. If you're not comfortable/experienced with working around mains (or any) electricity then please get someone who is to help you. As always be careful but have fun. :) Quote Link to comment Share on other sites More sharing options...
Darren Kitchen Posted December 8, 2006 Share Posted December 8, 2006 Very cool. Mind if I show Wess? Quote Link to comment Share on other sites More sharing options...
moonlit Posted December 8, 2006 Author Share Posted December 8, 2006 Sure, show away :D Quote Link to comment Share on other sites More sharing options...
sneaky_rupert Posted December 8, 2006 Share Posted December 8, 2006 Very cool. Mind if I show Wess? Tell him you can do it with LED's too :-) That will win him over. Quote Link to comment Share on other sites More sharing options...
moonlit Posted December 17, 2006 Author Share Posted December 17, 2006 Oooh, it's on teh live show! </bump> ;) Quote Link to comment Share on other sites More sharing options...
W4RP3D Posted December 17, 2006 Share Posted December 17, 2006 Could you use a simple opamp to amplify the signal from the speakers themselves, therefore not needing to turn up the volume to extreme levels? Quote Link to comment Share on other sites More sharing options...
moonlit Posted December 17, 2006 Author Share Posted December 17, 2006 Yeah I guess you could, I don't see any reason why not. Quote Link to comment Share on other sites More sharing options...
barrytone Posted December 18, 2006 Share Posted December 18, 2006 That's pretty cool :) If you didn't want to mess with the mains: you could use an old mic or even an old speaker and amplify the output to drive some LEDs/lights. Shouldn't be too hard to do with batteries. It'd flash to any sound source too. Quote Link to comment Share on other sites More sharing options...
c0d3_z3r0 Posted December 19, 2006 Share Posted December 19, 2006 Do you need resistors if you're using leds on this? I have an old 100w car amp that i want to try this with. Quote Link to comment Share on other sites More sharing options...
W4RP3D Posted December 19, 2006 Share Posted December 19, 2006 Depends, but you should still use them ever time you use a LED, its not like they cost much a few pence each, some even cheaper. Heres a link to work out what resistance they should be http://led.linear1.org/led.wiz Quote Link to comment Share on other sites More sharing options...
moonlit Posted December 19, 2006 Author Share Posted December 19, 2006 I used replacement christmas light bulbs in mine 'cos I picked them up for like 30p (50 cents?)at a jumble sale, though as Wess mentioned I used a pretty hefty amp to power them. The advantage though is if you do have a big enough amp they're pretty bright. I think a car amp would do nicely, should kick out enough juice for real bulbs... if 12v lights aren't bright enough try a couple of 6v flashlight bulbs. Quote Link to comment Share on other sites More sharing options...
sneaky_rupert Posted December 20, 2006 Share Posted December 20, 2006 You know, I haven't seen the episode yet....but I bet my variation was not mentioned. :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.