littlejob Posted November 23, 2016 Share Posted November 23, 2016 Hello, Long time follower, first time creating an account. I purchased the NANO Pineapple a while back, allong with a field kit or two, and have loved it for quite some time. Last week I updated to 1.1.3 and I have continued to have issues with the device freezing up, and even resetting all my filters at times. After performing a recon scan, adding just three hosts to a filter (on the same wireless network), switched client filtering to allow, and toggling allow associations, log probes, becon responses, capture SSID in pool, broadcast SSID's to pool and enabled PineAP Daemon. I then proceeded to de-auth just one device to no prevail (a few times) and then tried to de-auth all hosts on my test network, to no prevail. This is when the device appeared to lock up. After a few minutes the GUI reloads, and all of my settings and configs are wiped. Tried this a few times, with failure after about 10-15 minutes in. Per some suggestions on other forms, I have provided the dmesg logs below. http://pastebin.com/pHrKJGUr Any suggestions? Quote Link to comment Share on other sites More sharing options...
BritishPirate Posted November 23, 2016 Share Posted November 23, 2016 not had a pineapple be for have you tried downgrading it seeing if that helps so you can sort of work out if it software or hardware doing the most normal trouble shooting way is check for errors so these [ 12.050000] usb 1-1.1: device descriptor read/64, error -145 [ 749.930000] blk_update_request: I/O error, dev sda, sector 10202 [ 749.970000] blk_update_request: I/O error, dev sda, sector 10203 [ 749.990000] blk_update_request: I/O error, dev sda, sector 10202 issue with partition try downgrading and updating again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.