Jump to content
Zylla

MANA Attack, for the Pineapple.

Recommended Posts

35 minutes ago, Zylla said:

I just explained it step by step over SSH above.

 

 

I did everything but I do not see the module after cloning the module that I do afterwards

 

 

Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
root@Pineapple:~# opkg install git git-http
cd /pineapple/modules/
git clone git@github.com:adde88/ManaToolkitInstalling git (2.3.5-1) to root...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/git_2.3.5-1_ar71xx.ipk.
Installing git-http (2.3.5-1) to root...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/git-http_2.3.5-1_ar71xx.ipk.
Configuring git.
Configuring git-http.
root@Pineapple:~# cd /pineapple/modules/
-ash: cd: can't cd to /pineapple/modules/
root@Pineapple:~# git clone git@github.com:adde88/ManaToolkit
Cloning into 'ManaToolkit'...
warning: templates not found /usr/share/git-core/templates
The authenticity of host 'github.com (192.30.253.11)' can't be established.
RSA key fingerprint is SHA256:nThbg6kXUpJWGl7E1IGOCspRomTxdCARLviKw6E5SY8.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'github.com,192.30.253.11' (RSA) to the list of known hosts.
Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

Share this post


Link to post
Share on other sites
18 minutes ago, Foxtrot said:

Use HTTPS instead of SSH.

 

git clone https://github.com/adde88/ManaToolkit.git

Ohh, i wrote the "git@github.com"-part as it was the one i last used on my Tetra, and remembered out of my head.?
But yeah, HTTPS should definetly work. ?

Share this post


Link to post
Share on other sites

You're getting some error messages while trying to change the directory to /pineapple/modules/
It looks like that directory doesn't exist... Which is VERY strange.

ssh root@pineapple
opkg update && opkg install git git-http
cd /pineapple/modules/
git clone https://www.github.com/adde88/ManaToolkit

It's that easy.
But i'll see if i can alter the INSTALL.sh script (originally intended to install the packages, to also install the module (perhaps by choice))

Share this post


Link to post
Share on other sites
Hace 40 minutos, Zylla dijo:

Obtendrá algunos mensajes de error al intentar cambiar el directorio a / pineapple / modules /
Parece que el directorio no existe ... Lo cual es MUY extraño.


Es fácil.
Pero veré si puedo alterar el guión INSTALL.sh (también disponible para instalar los paquetes, también para instalar el módulo)

 

It would be a success if you did it brother. I have not yet been able to install it correctly,

Share this post


Link to post
Share on other sites
4 minutes ago, ramirovargas007 said:

 

It would be a success if you did it brother. I have not yet been able to install it correctly,

Well, you could transfer the files using Filezilla as you previously did. But as i said, the files then looses their setting of being executable.

To make the files executable again you can do this:

ssh root@pineapple
cd /pineapple/modules/ManaToolkit/scripts/
chmod +x *

This should fix your problem with getting "Install Dependencies" done.

Just a friendly heads up: To get anything out of this toolkit and/or module it requires a bit of knowledge, especially when it comes to handling Linux systems.
It's still in development. But if you know what you're doing, you can easily do EAP attacks with these devices.
I'm hoping that i one day can make that easier for the users to do. But i'm not sure if that's really feasible, as many networks requires tinkering with configs and settings to customise the attack.
Though, Hak5 did great on their latest update, opening for Enterprise Network attacks in a easy way. :)

  • Like 1

Share this post


Link to post
Share on other sites

Hello,

i just installed the Mana-Toolkit but i noticed that my Android Tablet i used for testing stated, that the AP 'Mana' does not have internet connection.
If i ignore that message i am still not able to load a https-Site (used www.heise.de) because it states the connection is not trustworthy.

Do i have to take additional steps (maybe generating certificates?)

I suppose the connection sharing may be broken too, because i get errors with http-Sites.
Can someone give me a hint how to fix this?

How can i configure it to respond to all searching AP-Beacons from Clients like in PineAP?

 

Share this post


Link to post
Share on other sites

My steps with my nano and microsd card. Does not seem to be working and i looked at problems just like mine unable to find a solution. Please help.

 

 

root@Pineapple:~# opkg update
Downloading https://www.wifipineapple.com/nano/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_pineapple.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
root@Pineapple:~# wget -qO- https://raw.githubusercontent.com/adde88/hostapd-man
a/master/INSTALL.sh | bash -s -- -v -v
--2018-09-11 02:44:49-- https://github.com/adde88/hostapd-mana-openwrt/tree/mas                                     ter/bin/ar71xx/packages/base
Resolving github.com... 192.30.253.112, 192.30.253.113
Connecting to github.com|192.30.253.112|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: '/tmp/ManaToolkit/base'

base                    [ <=>                ]  41.42K  --.-KB/s    in 0.1s

2018-09-11 02:44:50 (359 KB/s) - '/tmp/ManaToolkit/base' saved [42414]

Installing: MANA-Toolkit.
Go grab a cup of coffee, this will take a while...

Downloading https://www.wifipineapple.com/nano/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_pineapple.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_base.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_packages.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_management.
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/chaos_calmer_routing.
--2018-09-11 02:45:03-- https://github.com/adde88/hostapd-mana-openwrt/raw/mast                                     er/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk
Resolving github.com... 192.30.253.112, 192.30.253.113
Connecting to github.com|192.30.253.112|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/adde88/hostapd-mana-openwrt/master/b                                     in/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk [following]
--2018-09-11 02:45:03-- https://raw.githubusercontent.com/adde88/hostapd-mana-o                                     penwrt/master/bin/ar71xx/packages/base/asleap_2.2-1_ar71xx.ipk
Resolving raw.githubusercontent.com... 151.101.4.133
Connecting to raw.githubusercontent.com|151.101.4.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 12093 (12K) [application/octet-stream]
Saving to: 'asleap_2.2-1_ar71xx.ipk'

asleap_2.2-1_ar71xx 100%[===================>]  11.81K  --.-KB/s    in 0.005s

2018-09-11 02:45:03 (2.34 MB/s) - 'asleap_2.2-1_ar71xx.ipk' saved [12093/12093]

--2018-09-11 02:45:03-- https://github.com/adde88/hostapd-mana-openwrt/raw/mast                                     er/bin/ar71xx/packages/base/hostapd-mana_2.6-15_ar71xx.ipk
Resolving github.com... 192.30.253.113, 192.30.253.112
Connecting to github.com|192.30.253.113|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/adde88/hostapd-mana-openwrt/master/b                                     in/ar71xx/packages/base/hostapd-mana_2.6-15_ar71xx.ipk [following]
--2018-09-11 02:45:04-- https://raw.githubusercontent.com/adde88/hostapd-mana-o                                     penwrt/master/bin/ar71xx/packages/base/hostapd-mana_2.6-15_ar71xx.ipk
Resolving raw.githubusercontent.com... 151.101.4.133
Connecting to raw.githubusercontent.com|151.101.4.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 522883 (511K) [application/octet-stream]
Saving to: 'hostapd-mana_2.6-15_ar71xx.ipk'

hostapd-mana_2.6-15 100%[===================>] 510.63K   415KB/s    in 1.2s

2018-09-11 02:45:05 (415 KB/s) - 'hostapd-mana_2.6-15_ar71xx.ipk' saved [522883/                                     522883]

Installing asleap (2.2-1) to sd...
Installing hostapd-mana (2.6-15) to sd...
Installing tinyproxy (1.8.3-2) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/tinyproxy_1.8.3-2_ar71xx.ipk.
Installing stunnel (5.14-1) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/stunnel_5.14-1_ar71xx.ipk.
Installing ip (4.0.0-1) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/base/ip_4.0.0-1_ar71xx.ipk.
Installing python (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python_2.7.9-5_ar71xx.ipk.
Installing python-compiler (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-compiler_2.7.9-5_ar71xx.ipk.
Installing python-ctypes (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-ctypes_2.7.9-5_ar71xx.ipk.
Installing python-db (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-db_2.7.9-5_ar71xx.ipk.
Installing python-decimal (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-decimal_2.7.9-5_ar71xx.ipk.
Installing python-distutils (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-distutils_2.7.9-5_ar71xx.ipk.
Installing python-email (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-email_2.7.9-5_ar71xx.ipk.
Installing python-gdbm (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-gdbm_2.7.9-5_ar71xx.ipk.
Installing python-logging (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-logging_2.7.9-5_ar71xx.ipk.
Installing python-multiprocessing (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-multiprocessing_2.7.9-5_ar71xx.ipk.
Installing python-ncurses (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-ncurses_2.7.9-5_ar71xx.ipk.
Installing python-pydoc (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-pydoc_2.7.9-5_ar71xx.ipk.
Installing python-unittest (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-unittest_2.7.9-5_ar71xx.ipk.
Installing python-xml (2.7.9-5) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/packages/python-xml_2.7.9-5_ar71xx.ipk.
Installing sslsplit (0.4.11-1) to sd...
Downloading https://www.wifipineapple.com/nano/packages/sslsplit_0.4.11-1_ar71xx                                     .ipk.
Installing libevent2 (2.0.22-1) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/base/libevent2_2.0.22-1_ar71xx.ipk.
Installing libevent2-openssl (2.0.22-1) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/base/libevent2-openssl_2.0.22-1_ar71xx.ipk.
Installing libevent2-pthreads (2.0.22-1) to sd...
Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/pack                                     ages/base/libevent2-pthreads_2.0.22-1_ar71xx.ipk.
Package sslsplit (0.4.11-1) installed in sd is up to date.
Configuring ip.
grep: /usr/lib/opkg/info/ip.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/ip.list': No such file or directory
Configuring libevent2-openssl.
grep: /usr/lib/opkg/info/libevent2-openssl.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/libevent2-openssl.list': No such file or dir                                     ectory
Configuring python-db.
grep: /usr/lib/opkg/info/python-db.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-db.list': No such file or directory
Configuring python-decimal.
grep: /usr/lib/opkg/info/python-decimal.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-decimal.list': No such file or direct                                     ory
Configuring python-distutils.
grep: /usr/lib/opkg/info/python-distutils.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-distutils.list': No such file or dire                                     ctory
Configuring tinyproxy.
grep: /usr/lib/opkg/info/tinyproxy.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/tinyproxy.list': No such file or directory
Configuring stunnel.
grep: /usr/lib/opkg/info/stunnel.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/stunnel.list': No such file or directory
Configuring python-compiler.
grep: /usr/lib/opkg/info/python-compiler.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-compiler.list': No such file or direc                                     tory
Configuring python-ctypes.
grep: /usr/lib/opkg/info/python-ctypes.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-ctypes.list': No such file or directo                                     ry
Configuring python-email.
grep: /usr/lib/opkg/info/python-email.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-email.list': No such file or director                                     y
Configuring python-gdbm.
grep: /usr/lib/opkg/info/python-gdbm.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-gdbm.list': No such file or directory
Configuring python-logging.
grep: /usr/lib/opkg/info/python-logging.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-logging.list': No such file or direct                                     ory
Configuring python-multiprocessing.
grep: /usr/lib/opkg/info/python-multiprocessing.control: No such file or directo                                     ry
cat: can't open '/usr/lib/opkg/info/python-multiprocessing.list': No such file o                                     r directory
Configuring python-ncurses.
grep: /usr/lib/opkg/info/python-ncurses.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-ncurses.list': No such file or direct                                     ory
Configuring python-pydoc.
grep: /usr/lib/opkg/info/python-pydoc.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-pydoc.list': No such file or director                                     y
Configuring python-unittest.
grep: /usr/lib/opkg/info/python-unittest.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-unittest.list': No such file or direc                                     tory
Configuring python-xml.
grep: /usr/lib/opkg/info/python-xml.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python-xml.list': No such file or directory
Configuring python.
grep: /usr/lib/opkg/info/python.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/python.list': No such file or directory
Configuring libevent2.
grep: /usr/lib/opkg/info/libevent2.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/libevent2.list': No such file or directory
Configuring libevent2-pthreads.
grep: /usr/lib/opkg/info/libevent2-pthreads.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/libevent2-pthreads.list': No such file or di                                     rectory
Configuring sslsplit.
grep: /usr/lib/opkg/info/sslsplit.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/sslsplit.list': No such file or directory
Configuring hostapd-mana.
grep: /usr/lib/opkg/info/hostapd-mana.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/hostapd-mana.list': No such file or director                                     y
Configuring asleap.
grep: /usr/lib/opkg/info/asleap.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/asleap.list': No such file or directory
bash: line 39: /etc/init.d/stunnel: No such file or directory
Installation completed!
Type: 'install-mana-depends' to install python-related dependencies.
Launch MANA by typing: 'launch-mana' in the terminal.
uci: Entry not found
uci: Entry not found
root@Pineapple:~# launch-mana
-ash: launch-mana: not found
root@Pineapple:~#  /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh
-ash: /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh: not found
root@Pineapple:~# /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh
-ash: /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh: not found
root@Pineapple:~# bash /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh
bash: /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh: No such file or direct                                     ory
root@Pineapple:~# bash /sd/usr/share/mana-toolkit/run-mana/
/sd/usr/share/mana-toolkit/run-mana/: /sd/usr/share/mana-toolkit/run-mana/: is a                                      directory
root@Pineapple:~# cd /sd/usr/share/mana-toolkit/run-mana/
root@Pineapple:/sd/usr/share/mana-toolkit/run-mana# chmod +x launch-mana.sh
chmod: launch-mana.sh: No such file or directory
root@Pineapple:/sd/usr/share/mana-toolkit/run-mana# chmod +x launch-mana.sh
chmod: launch-mana.sh: No such file or directory
root@Pineapple:/sd/usr/share/mana-toolkit/run-mana# chmod +x/sd/usr/share/mana-t
oolkit/run-mana/launch-mana.sh
BusyBox v1.23.2 (2018-03-20 00:46:10 UTC) multi-call binary.

Usage: chmod [-R] MODE[,MODE]... FILE...

Each MODE is one or more of the letters ugoa, one of the
symbols +-= and one or more of the letters rwxst

        -R      Recurse

root@Pineapple:/sd/usr/share/mana-toolkit/run-mana# chmod +x /sd/usr/share/mana-
toolkit/run-mana/launch-mana.sh
chmod: /sd/usr/share/mana-toolkit/run-mana/launch-mana.sh: No such file or direc                                     tory
root@Pineapple:/sd/usr/share/mana-toolkit/run-mana# cd
root@Pineapple:~#
root@Pineapple:~#
root@Pineapple:~#  bash /pineapple/modules/ManaToolkit/scripts/dependencies.sh i
nstall sdapple:~#  bash /pineapple/modules/ManaToolkit/scripts/dependencies.sh a                                     root@Pineapple:~#  bash /pineapall1sd
bash: /pineapall: No such file or directory
root@Pineapple:~#
root@Pineapple:~#
rooh /pineapple/modules/ManaToolkit/scripts/dependencies.sh install sd sd
-ash: h: not found
root@Pineapple:~# bash /pineapple/modules/ManaToolkit
bash: /pineapple/modules/ManaToolkit: No such file or directory
root@Pineapple:~# bash /pineapple/modules/ManaToolkit/scripts/dependencies.sh install sd
bash: /pineapple/modules/ManaToolkit/scripts/dependencies.sh: No such file or directory
root@Pineapple:~# cd /sd/modules/
-ash: cd: can't cd to /sd/modules/
root@Pineapple:~# cd /sd
root@Pineapple:/sd# cd modules
-ash: cd: can't cd to modules
root@Pineapple:/sd# cd modules
-ash: cd: can't cd to modules
root@Pineapple:/sd#
 

Share this post


Link to post
Share on other sites

@Colincolin343

Are you sure your /sd directory is mounted properly? 

What output do you get when using "mount"? 

And please paste the output of /etc/fstab

It could be that your PATH variable is bugged. The launch-mana script gets installed to either /usr/sbin or /sd/usr/sbin

If PATH doesn't check /sd/usr/sbin it won't find the script. But it's working flawlessly on both my Tetra and Nano. 

Edited by Zylla

Share this post


Link to post
Share on other sites

Wow your fast thanks. Currently at school once I'm done I will tell you that right away. However i winscp into the pineapple and check the path where the script was supposed to be because everytime I launch mana it says can't be found. 

But if it is mounted correctly are my steps correct?

1. Go to pineapple web interface set up wlan2 for wifi then format USB and choose the sd card. (Directly in the pineapple)

2. Ssh into it with putty or terminal 

3. Opkg update right away 

4. The wget command that's at the homepage 

5. Install depends command right below the wget command

6. Launch-mana

7. Done

mount data

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

 cd /etc/mount

 can't cd to /etc/fstab

 

I also cant reformat the sd now this is the output now. it says its reformatting but its been like 20 mins...Its unrespoive to my sd card reader and my phone. USB adapter coming in on thursday but i dont think it will make a difference if my phone cant even read it

Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.4M    268.0K      2.2M  11% /
/dev/root                12.5M     12.5M         0 100% /rom
tmpfs                    29.8M    120.0K     29.7M   0% /tmp
/dev/mtdblock3            2.4M    268.0K      2.2M  11% /overlay
overlayfs:/overlay        2.4M    268.0K      2.2M  11% /
tmpfs                   512.0K         0    512.0K   0% /dev
Edited by Colincolin343

Share this post


Link to post
Share on other sites
17 hours ago, Colincolin343 said:

Wow your fast thanks. Currently at school once I'm done I will tell you that right away. However i winscp into the pineapple and check the path where the script was supposed to be because everytime I launch mana it says can't be found. 

But if it is mounted correctly are my steps correct?

1. Go to pineapple web interface set up wlan2 for wifi then format USB and choose the sd card. (Directly in the pineapple)

2. Ssh into it with putty or terminal 

3. Opkg update right away 

4. The wget command that's at the homepage 

5. Install depends command right below the wget command

6. Launch-mana

7. Done

mount data

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

 cd /etc/mount

 can't cd to /etc/fstab

 

I also cant reformat the sd now this is the output now. it says its reformatting but its been like 20 mins...Its unrespoive to my sd card reader and my phone. USB adapter coming in on thursday but i dont think it will make a difference if my phone cant even read it


Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.4M    268.0K      2.2M  11% /
/dev/root                12.5M     12.5M         0 100% /rom
tmpfs                    29.8M    120.0K     29.7M   0% /tmp
/dev/mtdblock3            2.4M    268.0K      2.2M  11% /overlay
overlayfs:/overlay        2.4M    268.0K      2.2M  11% /
tmpfs                   512.0K         0    512.0K   0% /dev

Well, you're main-problem is that /sd is not mounted properly.
Also /etc/fstab is a file, not a directory. (Use "cat /etc/fstab" to read it)
When you get /sd mounted properly, all you have to do is to launch the INSTALL.sh script.
And then "install-mana-depends".

You don't have to "opkg update" before launching my installer, it takes care of doing that.
It's simply two steps. INSTALL.sh -> install-mana-depends 

But you need to get /sd sorted out first.

Share this post


Link to post
Share on other sites
1 hour ago, Zylla said:

Well, you're main-problem is that /sd is not mounted properly.
Also /etc/fstab is a file, not a directory. (Use "cat /etc/fstab" to read it)
When you get /sd mounted properly, all you have to do is to launch the INSTALL.sh script.
And then "install-mana-depends".

You don't have to "opkg update" before launching my installer, it takes care of doing that.
It's simply two steps. INSTALL.sh -> install-mana-depends 

But you need to get /sd sorted out first.

Ok, my sd card can't be read my windows or linux and no of my readers can read any of my sd cards I have 3 but they all are unresponsive. I tried a sd adapter in my laptop but it won't read and no letters get assigned at all. Is this a hardware problem or the sd? I just bought it too I have no idea how it could break just like that. Or do you think the adapters are just broken and usb adapter will work and show my sd card. I got no clue where to start and I looked up a bunch of useless stuff. Hopefully the USB works and it's just because lsusb can't show sd cards

Thoughts?

Edited by Colincolin343
Extra

Share this post


Link to post
Share on other sites
2 hours ago, Colincolin343 said:

Ok, my sd card can't be read my windows or linux and no of my readers can read any of my sd cards I have 3 but they all are unresponsive. I tried a sd adapter in my laptop but it won't read and no letters get assigned at all. Is this a hardware problem or the sd? I just bought it too I have no idea how it could break just like that. Or do you think the adapters are just broken and usb adapter will work and show my sd card. I got no clue where to start and I looked up a bunch of useless stuff. Hopefully the USB works and it's just because lsusb can't show sd cards

Thoughts?

I'm not sure. Windows should detect any hardware being connected, like the "sound you get when you connect something to it. 

What device are you trying to use? 

You could try pasting me the output of "dmesg" a couple of seconds after inserting the device. 

For the Nano I recommend using a normal USB flash drive mounted as /sd, instead of the SD-card. As it seems to have alot of issues with SD-cards. 

Guides for doing so can be found in this thread, as alot of users are doing it. 

PS. Use pastebin.org for your dmesg output, it's alot of stuff being outputted. 

Edited by Zylla

Share this post


Link to post
Share on other sites

I am now going to be using USBs and i got thid usb hub as well which looked like a steal

https://www.amazon.com/UGREEN-Splitter-Windows-Linux-systems/dp/B00LN67RU6/ref=sr_1_10_sspa?ie=UTF8&amp;qid=1536806762&amp;sr=8-10-spons&amp;keywords=round+usb+hub&amp;psc=1#customerReviews

Will this work for on my pineapple if i plug it into the back of it? I just dont want to damage the pineapple if too much power is being taken from it and it dies. Is this model safe or will it require me to cut wires?

I got a new microsd and this is my config file or fstab

config global
    option anon_swap '0'
    option anon_mount '0'
    option auto_swap '1'
    option auto_mount '1'
    option delay_root '5'
    option check_fs '0'

config mount
    option target '/sd1'
    option device '/dev/sdcard/sd1'
    option fstype 'auto'
    option options 'rw,sync'
    option enabled '1'

 

I sshed through putty and did the wget command it loaded and gave me those errors you told us to ignore 

(at: can't open '/usr/lib/opkg/info/sslsplit.list': No such file or directory
Configuring hostapd-mana.
grep: /usr/lib/opkg/info/hostapd-mana.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/hostapd-mana.list': No such file or director                                     y
Configuring asleap.
grep: /usr/lib/opkg/info/asleap.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/asleap.list': No such file or directory
bash: line 39: /etc/init.d/stunnel: No such file or directory).

I then did the install-mana-depends and it says that the command is unknown or cant be performed like its non-existent. I then tried the command launch-mana and it says the exact thing like its not existent. There are no files in the launch-mana btw its empty. But this is file is not empty (picture). I just have confused on how it will just 'work' if those commands wont launch for me.

SD card btw and it WORKS this time. yay

 

Capture.PNG

Edited by Colincolin343
Helpz

Share this post


Link to post
Share on other sites
On 9/13/2018 at 12:17 AM, Colincolin343 said:

I am now going to be using USBs and i got thid usb hub as well which looked like a steal

https://www.amazon.com/UGREEN-Splitter-Windows-Linux-systems/dp/B00LN67RU6/ref=sr_1_10_sspa?ie=UTF8&amp;qid=1536806762&amp;sr=8-10-spons&amp;keywords=round+usb+hub&amp;psc=1#customerReviews

Will this work for on my pineapple if i plug it into the back of it? I just dont want to damage the pineapple if too much power is being taken from it and it dies. Is this model safe or will it require me to cut wires?

I got a new microsd and this is my config file or fstab

config global
    option anon_swap '0'
    option anon_mount '0'
    option auto_swap '1'
    option auto_mount '1'
    option delay_root '5'
    option check_fs '0'

config mount
    option target '/sd1'
    option device '/dev/sdcard/sd1'
    option fstype 'auto'
    option options 'rw,sync'
    option enabled '1'

 

I sshed through putty and did the wget command it loaded and gave me those errors you told us to ignore 

(at: can't open '/usr/lib/opkg/info/sslsplit.list': No such file or directory
Configuring hostapd-mana.
grep: /usr/lib/opkg/info/hostapd-mana.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/hostapd-mana.list': No such file or director                                     y
Configuring asleap.
grep: /usr/lib/opkg/info/asleap.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/asleap.list': No such file or directory
bash: line 39: /etc/init.d/stunnel: No such file or directory).

I then did the install-mana-depends and it says that the command is unknown or cant be performed like its non-existent. I then tried the command launch-mana and it says the exact thing like its not existent. There are no files in the launch-mana btw its empty. But this is file is not empty (picture). I just have confused on how it will just 'work' if those commands wont launch for me.

SD card btw and it WORKS this time. yay

 

Capture.PNG

Your fstab file is not correct. It's trying to mount the normal SD-card (builtin) to the wrong directory. (/sd1)

The directory should be /sd and the device should NOT be /dev/sdcard/sd1 if using a usb flash drive.
But normally something like /dev/sdb1 or /dev/sda1. (Depends on how you've formatted the drive and what device ID it registers with (sda, sdb))

Share this post


Link to post
Share on other sites
5 hours ago, Zylla said:

Your fstab file is not correct. It's trying to mount the normal SD-card (builtin) to the wrong directory. (/sd1)

The directory should be /sd and the device should NOT be /dev/sdcard/sd1 if using a usb flash drive.
But normally something like /dev/sdb1 or /dev/sda1. (Depends on how you've formatted the drive and what device ID it registers with (sda, sdb))

Ok but it looks like my sd card is mounted see.. Its sd1 and has 128gb(is a microsd card, i am giving it one more chance). Then i run your command (i dont change anything in your command, no changes at all i just run it.) and it says it install but the commands never work after i installed it. I am formatting it with the wifi pineapple usb command on the web interface.

My new error when i install the command:

Configuring asleap.
grep: /usr/lib/opkg/info/asleap.control: No such file or directory
cat: can't open '/usr/lib/opkg/info/asleap.list': No such file or directory
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for hosta                                                                                                                                                             pd-mana:
 *      tinyproxy *     stunnel *       ip *    python *
 * opkg_install_cmd: Cannot install package hostapd-mana.
bash: line 39: /etc/init.d/stunnel: No such file or directory
 

Heres my dmesg:

https://pastebin.com/2S8tADcM

Heres my resources:

Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.4M    272.0K      2.2M  11% /
/dev/root                12.5M     12.5M         0 100% /rom
tmpfs                    29.8M    200.0K     29.6M   1% /tmp
/dev/mtdblock3            2.4M    272.0K      2.2M  11% /overlay
overlayfs:/overlay        2.4M    272.0K      2.2M  11% /
tmpfs                   512.0K         0    512.0K   0% /dev
/dev/sdcard/sd1         116.3G     68.1M    110.3G   0% /sd

Heres my fstab:

config global
    option anon_swap '0'
    option anon_mount '0'
    option auto_swap '1'
    option auto_mount '1'
    option delay_root '5'
    option check_fs '0'

config mount
    option target '/sd1'
    option device '/dev/sdcard/sd1'
    option fstype 'auto'
    option options 'rw,sync'
    option enabled '1'

Edited by Colincolin343

Share this post


Link to post
Share on other sites

Hi @Zylla! I trying install mana-toolkit on Tetra (FW 2.6.0), but have some trouble with it:

1. cd /pineapple/modules/

2. git clone https://github.com/adde88/ManaToolkit.git

3. cd ManaToolkit/scripts/

4. sh dependencies.sh

And got error:

./dependencies.sh: line 60: install-mana-depends: command not found

 

What I doing wrong?

Share this post


Link to post
Share on other sites

I went on vacation when the new firmware got pushed out, so i haven't had time to update it. 

Arrived back home again today, so i'll see if i can push out updates in a few hours.

  • Upvote 1

Share this post


Link to post
Share on other sites
10 hours ago, Zylla said:

I went on vacation when the new firmware got pushed out, so i haven't had time to update it. 

Arrived back home again today, so i'll see if i can push out updates in a few hours.

PMKID Module?

Share this post


Link to post
Share on other sites
31 minutes ago, Mut4b0r said:

@Zylla, Hello! ManaToolkit can not install yet. Please, tell me, when you update  dependencies?

The module does not work with the latest firmware, yet.
I haven't had much time to work on it. But it's coming.

However, the hostapd-mana package does work, so if you're experienced with using hostapd-mana, you can use it manually in the terminal.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...