dood Posted August 1, 2016 Share Posted August 1, 2016 Hi guys, hope I can get some community help on this one. Been searching and trying to get it figured out but no luck. Attempted a factory reset on my WP Tetra with no luck and then a Firmware reset but now my computer does not recognize any of the ports on the wifi pineapple. I cannot even load the special firmware reset page because I cannot access the pineapple. The serial port also gives me no access. Don't want to give up but I really have tried everything for a few days now before posting. Quote Link to comment Share on other sites More sharing options...
dood Posted August 1, 2016 Author Share Posted August 1, 2016 update, ports are still not showing up but noticed it does allow me to log into the wifi pineapples wifi network and establish a root password and wifi password for login. I can then enable the management wifi settings but still cannot seem to be able to get the ports to come back up. Quote Link to comment Share on other sites More sharing options...
dood Posted August 1, 2016 Author Share Posted August 1, 2016 Ports not showing up in windows or linux. SSH works when I am connected to the management wifi coming from the pineapple. Anything I can do with root access to the pineapple to re-flash? Since the ports don't work, I cannot access the flash page as I am connected through the wifi. Quote Link to comment Share on other sites More sharing options...
dood Posted August 1, 2016 Author Share Posted August 1, 2016 flashed using SSH method, could not get the tetra_factory.bin to run, I could only get the update_1.0.2.bin to run. If anyone knows how I can run the tetra factory reset that should do the trick. I can get access to the tetra root and ssh but just couldnt find the commands on how to factory flash by command line. Help on this would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
dood Posted August 1, 2016 Author Share Posted August 1, 2016 ok ran the setup again but ran the command line firmware update using -F and it took but ETH1 is still not working sadly. Quote Link to comment Share on other sites More sharing options...
Foxtrot Posted August 2, 2016 Share Posted August 2, 2016 Instead of forcing firmware upgrades (Not a good idea, by the way), have you tried using a different computer? Also, what are you trying to use eth1 for? Quote Link to comment Share on other sites More sharing options...
dood2 Posted August 2, 2016 Share Posted August 2, 2016 I'm guessing a mod disabled my other account from posting? strange, if it was. Not cool. I was using eth1 to login to the web console. I have not been able to connect to 172.16.42.1 at all. The eth1 is up but is not recognized when trying to plug any cable into it. Quote Link to comment Share on other sites More sharing options...
dood2 Posted August 2, 2016 Share Posted August 2, 2016 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.240000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.250000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.260000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.270000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.280000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.280000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.290000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.410000] ath: EEPROM regdomain: 0x0 Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.410000] ath: EEPROM indicates default country code should be used Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.410000] ath: doing EEPROM country->regdmn map search Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.410000] ath: country maps to regdmn code: 0x3a Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.410000] ath: Country alpha2 being used: US Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.410000] ath: Regpair used: 0x3a Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.430000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47 Mon Aug 1 11:40:28 2016 kern.warn kernel: [ 30.430000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.440000] cfg80211: Calling CRDA for country: US Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.450000] cfg80211: Regulatory domain changed to country: US Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.450000] cfg80211: DFS Master region: FCC Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.490000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.500000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.500000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.510000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.530000] ath: EEPROM regdomain: 0x0 Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.530000] ath: EEPROM indicates default country code should be used Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.530000] ath: doing EEPROM country->regdmn map search Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.530000] ath: country maps to regdmn code: 0x3a Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.530000] ath: Country alpha2 being used: US Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.530000] ath: Regpair used: 0x3a Mon Aug 1 11:40:28 2016 kern.debug kernel: [ 30.540000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.540000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.570000] usbcore: registered new interface driver ath9k_htc Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.600000] RPC: Registered named UNIX socket transport module. Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.600000] RPC: Registered udp transport module. Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.610000] RPC: Registered tcp transport module. Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.610000] RPC: Registered tcp NFSv4.1 backchannel transport module. Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.640000] tun: Universal TUN/TAP device driver, 1.6 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.640000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.870000] usbcore: registered new interface driver rt2800usb Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.880000] usbcore: registered new interface driver rtl8187 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.910000] usbcore: registered new interface driver rtl8192cu Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.940000] usbcore: registered new interface driver cdc_acm Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.950000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.960000] usbcore: registered new interface driver cdc_wdm Mon Aug 1 11:40:28 2016 kern.info kernel: [ 30.970000] nf_conntrack version 0.5.0 (1968 buckets, 7872 max) Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.000000] usbcore: registered new interface driver ums-alauda Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.010000] usbcore: registered new interface driver ums-cypress Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.020000] usbcore: registered new interface driver ums-datafab Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.030000] usbcore: registered new interface driver ums-freecom Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.040000] usbcore: registered new interface driver ums-isd200 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.050000] usbcore: registered new interface driver ums-jumpshot Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.050000] usbcore: registered new interface driver ums-karma Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.060000] usbcore: registered new interface driver ums-sddr09 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.070000] usbcore: registered new interface driver ums-sddr55 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.080000] usbcore: registered new interface driver ums-usbat Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.100000] usbcore: registered new interface driver usbserial Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.100000] usbcore: registered new interface driver usbserial_generic Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.110000] usbserial: USB Serial support registered for generic Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.150000] xt_time: kernel timezone is -0000 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.160000] usbcore: registered new interface driver asix Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.170000] usbcore: registered new interface driver cdc_ether Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.180000] ip_tables: (C) 2000-2006 Netfilter Core Team Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.200000] usbcore: registered new interface driver pl2303 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.200000] usbserial: USB Serial support registered for pl2303 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.220000] PPP generic driver version 2.4.2 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.220000] NET: Registered protocol family 24 Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.230000] usbcore: registered new interface driver qmi_wwan Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.240000] usbcore: registered new interface driver rndis_host Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.250000] usbcore: registered new interface driver sierra_net Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.270000] usbcore: registered new interface driver option Mon Aug 1 11:40:28 2016 kern.info kernel: [ 31.270000] usbserial: USB Serial support registered for GSM modem (1-port) Mon Aug 1 11:40:31 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly Mon Aug 1 11:40:31 2016 daemon.err block: /dev/ubi0_1 is already mounted Mon Aug 1 11:40:33 2016 cron.info crond[1001]: crond (busybox 1.23.2) started, log level 5 Mon Aug 1 11:40:36 2016 kern.info kernel: [ 41.740000] device eth1 entered promiscuous mode Mon Aug 1 11:40:36 2016 kern.info kernel: [ 41.740000] br-lan: port 1(eth1) entered forwarding state Mon Aug 1 11:40:36 2016 kern.info kernel: [ 41.750000] br-lan: port 1(eth1) entered forwarding state Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'lan' is enabled Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'lan' is setting up now Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'lan' is now up Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'loopback' is enabled Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'loopback' is setting up now Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'loopback' is now up Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'wan' is enabled Mon Aug 1 11:40:36 2016 daemon.notice netifd: Bridge 'br-lan' link is up Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'lan' has link connectivity Mon Aug 1 11:40:36 2016 daemon.notice netifd: Network device 'lo' link is up Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'loopback' has link connectivity Mon Aug 1 11:40:36 2016 daemon.notice netifd: Bridge 'br-lan' link is down Mon Aug 1 11:40:36 2016 daemon.notice netifd: Interface 'lan' has link connectivity loss Mon Aug 1 11:40:36 2016 kern.info kernel: [ 41.920000] br-lan: port 1(eth1) entered disabled state Mon Aug 1 11:40:37 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Mon Aug 1 11:40:38 2016 user.info autossh[1075]: starting ssh (count 1) Mon Aug 1 11:40:38 2016 user.info autossh[1075]: ssh child pid is 1084 Mon Aug 1 11:40:38 2016 kern.info kernel: [ 44.030000] eth1: link up (100Mbps/Full duplex) Mon Aug 1 11:40:39 2016 kern.info kernel: [ 44.190000] br-lan: port 1(eth1) entered forwarding state Mon Aug 1 11:40:39 2016 kern.info kernel: [ 44.190000] br-lan: port 1(eth1) entered forwarding state Mon Aug 1 11:40:39 2016 daemon.notice netifd: Network device 'eth1' link is up Mon Aug 1 11:40:39 2016 daemon.notice netifd: Bridge 'br-lan' link is up Mon Aug 1 11:40:39 2016 daemon.notice netifd: Interface 'lan' has link connectivity Mon Aug 1 11:40:40 2016 daemon.notice netifd: radio1 (1035): Interface 0 setup failed: BRIDGE_NOT_ALLOWED Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.190000] br-lan: port 1(eth1) entered forwarding state Mon Aug 1 11:40:41 2016 daemon.notice netifd: radio0 (1034): Configuration file: /var/run/hostapd-phy0.conf Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.340000] device wlan0 entered promiscuous mode Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.340000] br-lan: port 2(wlan0) entered forwarding state Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.350000] br-lan: port 2(wlan0) entered forwarding state Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.360000] br-lan: port 2(wlan0) entered disabled state Mon Aug 1 11:40:41 2016 daemon.notice netifd: radio0 (1034): Using interface wlan0 with hwaddr 00:13:37:a5:ad:f7 and ssid "Woah_ADF7" Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.550000] br-lan: port 2(wlan0) entered forwarding state Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.550000] br-lan: port 2(wlan0) entered forwarding state Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.580000] device wlan0-1 entered promiscuous mode Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.590000] br-lan: port 3(wlan0-1) entered forwarding state Mon Aug 1 11:40:41 2016 kern.info kernel: [ 46.590000] br-lan: port 3(wlan0-1) entered forwarding state Mon Aug 1 11:40:41 2016 daemon.notice netifd: radio0 (1034): Using interface wlan0-1 with hwaddr 02:13:37:a5:ad:f7 and ssid "ohhai" Mon Aug 1 11:40:42 2016 kern.info kernel: [ 47.410000] br-lan: port 3(wlan0-1) entered disabled state Mon Aug 1 11:40:42 2016 daemon.notice netifd: radio0 (1034): wlan0: interface state UNINITIALIZED->ENABLED Mon Aug 1 11:40:42 2016 daemon.notice netifd: radio0 (1034): wlan0: AP-ENABLED Mon Aug 1 11:40:42 2016 kern.info kernel: [ 47.670000] br-lan: port 3(wlan0-1) entered forwarding state Mon Aug 1 11:40:42 2016 kern.info kernel: [ 47.670000] br-lan: port 3(wlan0-1) entered forwarding state Mon Aug 1 11:40:43 2016 kern.info kernel: [ 48.550000] br-lan: port 2(wlan0) entered forwarding state Mon Aug 1 11:40:44 2016 auth.info sshd[1386]: Server listening on 0.0.0.0 port 22. Mon Aug 1 11:40:44 2016 user.emerg syslog: setting up led wlan0 Mon Aug 1 11:40:44 2016 user.emerg syslog: setting up led wlan1 Mon Aug 1 11:40:44 2016 user.emerg syslog: setting up led wan Mon Aug 1 11:40:44 2016 kern.info kernel: [ 49.670000] br-lan: port 3(wlan0-1) entered forwarding state Mon Aug 1 11:40:45 2016 user.emerg syslog: WiFi Pineapple Controller version 0.1 Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 user.emerg syslog: Usage: pineapple [command] [[options]] [[[args]]] Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 user.emerg syslog: A Program to controll your WiFi Pineapple over the commandline. Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 user.emerg syslog: Commands: Mon Aug 1 11:40:45 2016 user.emerg syslog: karma Mon Aug 1 11:40:45 2016 user.emerg syslog: start - Starts Karma Mon Aug 1 11:40:45 2016 user.emerg syslog: stop - Stops Karma Mon Aug 1 11:40:45 2016 user.emerg syslog: list_ssids - Lists all SSIDs in Karma's black/white list. Mon Aug 1 11:40:45 2016 user.emerg syslog: list_macs - Lists all SSIDs in Karma's black list. Mon Aug 1 11:40:45 2016 user.emerg syslog: add_ssid [SSID] - Adds the specified SSID to the black/white list. Mon Aug 1 11:40:45 2016 user.emerg syslog: del_ssid [SSID] - Delete the specified SSID from the black/white list. Mon Aug 1 11:40:45 2016 user.emerg syslog: add_mac [MAC] - Adds the specified MAC to the black list. Mon Aug 1 11:40:45 2016 user.emerg syslog: del_mac [MAC] - Delete the specified MAC from the black list. Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 user.emerg syslog: led Mon Aug 1 11:40:45 2016 user.emerg syslog: on - Turn's the blue LED on. Mon Aug 1 11:40:45 2016 user.emerg syslog: off - Turn's the blue LED off. Mon Aug 1 11:40:45 2016 user.emerg syslog: reset - Reset's LED behaviour to default Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 user.emerg syslog: module Mon Aug 1 11:40:45 2016 user.emerg syslog: list - Lists all available modules with a CLI component. Mon Aug 1 11:40:45 2016 user.emerg syslog: [Module Name] [[args]] - Runs specified module with args if given. Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 user.emerg syslog: notify [notification text] - Sends a notification to the webinterface Mon Aug 1 11:40:45 2016 user.emerg syslog: Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: started, version 2.73 cachesize 150 Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: DNS service limited to local subnets Mon Aug 1 11:40:45 2016 daemon.info dnsmasq-dhcp[1463]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: using local addresses only for domain lan Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: reading /tmp/resolv.conf.auto Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: using local addresses only for domain lan Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: using nameserver 8.8.4.4#53 Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: read /etc/hosts - 1 addresses Mon Aug 1 11:40:45 2016 daemon.info dnsmasq[1463]: read /tmp/hosts/dhcp - 1 addresses Mon Aug 1 11:40:45 2016 daemon.info dnsmasq-dhcp[1463]: read /etc/ethers - 0 addresses Mon Aug 1 11:40:45 2016 daemon.info procd: - init complete - Mon Aug 1 11:40:46 2016 user.err autossh[1075]: ssh exited prematurely with status 255; autossh exiting Mon Aug 1 11:40:47 2016 daemon.notice netifd: Network device 'wlan0' link is up Mon Aug 1 11:40:47 2016 daemon.notice netifd: Network device 'wlan0-1' link is up Mon Aug 1 11:48:40 2016 daemon.notice netifd: Network device 'eth0' link is up Mon Aug 1 11:48:40 2016 daemon.notice netifd: Interface 'wan' has link connectivity Mon Aug 1 11:48:40 2016 daemon.notice netifd: Interface 'wan' is setting up now Mon Aug 1 11:48:40 2016 kern.info kernel: [ 525.170000] eth0: link up (1000Mbps/Full duplex) Mon Aug 1 11:48:40 2016 daemon.notice netifd: wan (1567): udhcpc (v1.23.2) started Mon Aug 1 11:48:40 2016 daemon.notice netifd: wan (1567): Sending discover... Mon Aug 1 11:48:43 2016 daemon.notice netifd: wan (1567): Sending discover... Mon Aug 1 11:48:46 2016 daemon.notice netifd: wan (1567): Sending discover... Mon Aug 1 11:51:10 2016 daemon.notice netifd: Network device 'eth0' link is down Mon Aug 1 11:51:10 2016 daemon.notice netifd: Interface 'wan' has link connectivity loss Mon Aug 1 11:51:10 2016 kern.info kernel: [ 675.670000] eth0: link down Mon Aug 1 11:51:10 2016 daemon.notice netifd: wan (1567): Received SIGTERM Mon Aug 1 11:55:24 2016 daemon.info hostapd: wlan0-1: STA cc:3d:82:e1:86:65 IEEE 802.11: authenticated Mon Aug 1 11:55:24 2016 daemon.info hostapd: wlan0-1: STA cc:3d:82:e1:86:65 IEEE 802.11: associated (aid 1) Mon Aug 1 11:55:24 2016 daemon.info hostapd: wlan0-1: STA cc:3d:82:e1:86:65 RADIUS: starting accounting session 579F353A-00000000 Mon Aug 1 11:55:24 2016 daemon.info hostapd: wlan0-1: STA cc:3d:82:e1:86:65 WPA: pairwise key handshake completed (RSN) Mon Aug 1 11:55:27 2016 daemon.info dnsmasq-dhcp[1463]: DHCPDISCOVER(br-lan) cc:3d:82:e1:86:65 Mon Aug 1 11:55:27 2016 daemon.info dnsmasq-dhcp[1463]: DHCPOFFER(br-lan) 172.16.42.137 cc:3d:82:e1:86:65 Mon Aug 1 11:55:27 2016 daemon.info dnsmasq-dhcp[1463]: DHCPREQUEST(br-lan) 172.16.42.137 cc:3d:82:e1:86:65 Mon Aug 1 11:55:27 2016 daemon.info dnsmasq-dhcp[1463]: DHCPACK(br-lan) 172.16.42.137 cc:3d:82:e1:86:65 mypc Tue Aug 2 06:51:23 2016 cron.err crond[1001]: time disparity of 1135 minutes detected This is my system log and this is my network settings. If someone can help, I'm just learning :) br-lan Link encap:Ethernet HWaddr 00:13:37:A5:AD:F7 inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:891 errors:0 dropped:1 overruns:0 frame:0 TX packets:1066 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:120508 (117.6 KiB) TX bytes:536960 (524.3 KiB) eth0 Link encap:Ethernet HWaddr 00:13:37:A5:AD:F9 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:375 errors:0 dropped:90 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34700 (33.8 KiB) TX bytes:17442 (17.0 KiB) Interrupt:5 eth1 Link encap:Ethernet HWaddr 00:13:37:A5:AD:F7 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:694 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:42018 (41.0 KiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:644 errors:0 dropped:0 overruns:0 frame:0 TX packets:644 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:56094 (54.7 KiB) TX bytes:56094 (54.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:13:37:A5:AD:F7 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:54442 (53.1 KiB) wlan0-1 Link encap:Ethernet HWaddr 02:13:37:A5:AD:F7 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:971 errors:0 dropped:0 overruns:0 frame:0 TX packets:1255 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:140396 (137.1 KiB) TX bytes:581076 (567.4 KiB) wlan1 Link encap:Ethernet HWaddr 00:13:37:A5:AD:F8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.