Interfaces what they should be

[Zen]

Can someone please tell me what the interfaces should be on the Nano please.
My internet is on 192.168.0.1 Network.

I found a Mark 5 example here:
Pineapple Netmask [255.255.255.0]:
Pineapple Network [172.16.42.0/24]:
Interface between PC and Pineapple [eth0]:
Interface between PC and Internet [wlan0]:
Internet Gateway [192.168.0.1]:
IP Address of Host PC [172.16.42.42]: or should be 192.168.0.4
IP Address of Pineapple [172.16.42.1]:

_ . ___ \||/ Internet: 192.168.0.1 wlan0
( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42
(_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0

What should it be on the Nano. What interfaces are where? But I not clear the different interfaces do.

What is lan-br? and how does this route to 192.168.0.1?

Wlan

eth0

Edited March 9, 2016 by Zen

[Zen]

What does br-lan stand for? Does anyone have a good guide to routing. I have some routing issues but I want to learn. Any suggestions greatly appreciated.

Many thanks,

Zen

[shadowmmm]

Have you watched the videos on pineapple university?

[Zen]

I have but I will do it again just in case. I think that I may have found the problem. There is a command in the uci interface that I can set as the default internet gateway. Thank you the heads up shadowmmm.

[Zen]

https://wiki.openwrt.org/doc/uciIs the best document that has helped me understand the interfaces so far. I thought that I would share my mini journey.

[Zen]

This looks like somthing I will will try to install on the Nano.

https://wiki.openwrt.org/doc/howto/luci.essentials

I have no idea right now if it will cause probelms or not but I have a need to experiment :-)

[Zen]

I failed - opkg update opkg install luci