Jump to content

Using Kismet for wardriving wifi and bluetooth simultaneously?


bktruss
 Share

Recommended Posts

I plan on using a Raspberry Pi 2 running Raspian. I want to wardrive wifi and bluetooth at the same time also while using gpsd of course for a rough location on one Raspberry Pi. I will be using an Alfa w/ external antenna and an Ubertooth w/ external antenna. Now for some questions...

1. Will I need to run (2) instances of Kismet, or can it be done is (1) instance, keeping in mind the Ubertooth needs to run a plug-in?

2. If I need to run (2) instances of Kismet, will I need to use (2) separate config files, and/or two installations of Kismet in differing locations?

3. I'm assuming gpsd can feed GPS coordinates to both the wifi and bluetooth scanning?

4. Offer any insight to some problems you think I might run into, or recommandations on the best way to accomplish this, or even perhaps a better way?

Any feedback would be much appreciated..Thanks

Link to comment
Share on other sites

I'm not sure about the kismet side of it yet, but I do use my ubertooth with my raspi2. I've gotten to the point of the spec analyzer, and everything compiles and works great.

I'd be interested to find out what your tests find about trying the logging of both simultaneously with kismet and gps though.

Link to comment
Share on other sites

What's the load on the CPU when you do this? That would be my biggest worry with this concept. Most of these radios require considerable (in ARM terms) horsepower to process the data they provide. If your Pi is one of the old ones, you might not have enough oomph to properly process all of it reliably.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...